Wireless Access

Reply
Contributor I
Posts: 48
Registered: ‎01-19-2012

unable to transfer files

hi,

 

I am unable to transfer files between different Vlan while inter VLAN routing is Enabled. I successfully ping both different subnets but unable to send files i am using TFTP 3com, when trying to send files message appears"TimeOut"

Guru Elite
Posts: 21,499
Registered: ‎03-29-2007

Re: unable to transfer files

What is the source OS and application and what is the target OS and application?  Make sure either host does not have a firewall enabled.

 

On the Aruba controller, type:

 

show datapathsession table <ip address of client> 

 

That will tell you what traffic is going back and forth and whether it is being denied.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I
Posts: 48
Registered: ‎01-19-2012

Re: unable to transfer files

i am new to Aruba, i am using it for testing purpose.

In my testing enviornment there are 2 PCs, 1 is connected to Controllerthrough AP 61 having IP address like:192.168.2.200

and 2nd PC is directly connected to controller through CAT6 and having IP like: 10.101.14.252 both are on different VLANS, I successfully PING both PCs from each other, but unable to send file through 3comTFTP, Filezilla,.

Controller  OS is: 5.3, and the controller is 200 .

Please help me that how can i resolvethis problem . Both PCs have disabled Firewall,& antivirus

Guru Elite
Posts: 21,499
Registered: ‎03-29-2007

Re: unable to transfer files

[ Edited ]

faisalkhan88 wrote:

i am new to Aruba, i am using it for testing purpose.

In my testing enviornment there are 2 PCs, 1 is connected to Controllerthrough AP 61 having IP address like:192.168.2.200

and 2nd PC is directly connected to controller through CAT6 and having IP like: 10.101.14.252 both are on different VLANS, I successfully PING both PCs from each other, but unable to send file through 3comTFTP, Filezilla,.

Controller  OS is: 5.3, and the controller is 200 .

Please help me that how can i resolvethis problem . Both PCs have disabled Firewall,& antivirus


When your users are attached, what role do they end up in?  Please see if that role is allowing TFTP by going to Configuration> Security> Access Control.  Edit the role that the users end up in and see if there is a firewall policy allowing TFTP.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I
Posts: 48
Registered: ‎01-19-2012

Re: unable to transfer files

I can't get access.

 

My directly connected serve to the controller 200 has an IP address : 10.101.2.250

and a PC that i wish to join or make client of the server got IP from AP63 is 10.101.2.251

It successfully ping each other when trying to use follwing command in RUN

\\10.101.2.251   or  \\10.101.2.250         from one another  message appears "Network Path not found"

 

and when i replace AP connected pc to Wired connection got same ip i.e 10.101.2.251 then it works fine.

 

I am unable to understand that what is going on..

Help me,

Tahnks

 

Guru Elite
Posts: 21,499
Registered: ‎03-29-2007

Re: unable to transfer files

When a client is connected to the Aruba Controller, that client has a role.  You can see a list of clients and their role in Monitoring> Controller> Clients.  What is the role that your client that is connected to the AP61 get?



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: