Wireless Access

Reply
MVP
Posts: 2,992
Registered: ‎10-25-2011

usb modem for 620 controller issue

Im trying to set up a usb modem in the lab controller to see how it works but this is what happens

(Office_Alternetworks) #show usb

USB Device Table
----------------
Address  Product        Vendor  ProdID  Serial  Type      Profile  State
-------  -------        ------  ------  ------  ----      -------  -----
3        HUAWEI HiLink  12d1    1f01            Cellular  claro    Error: Modem TTY port test failed. #1

 

(Office_Alternetworks) #show usb ports 3

sr0
ttyUSB0

 

(Office_Alternetworks) #show usb test 3 ttyUSB0


Error: Port I/O error. TTY port usb/3/ttyUSB0 inaccessible

 

(Office_Alternetworks) #show usb verbose


T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 1
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.16 ohci_hcd
S:  Product=XLS OHCI Host Controller
S:  SerialNumber=ohci-xls
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 1
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.16 ohci_hcd
S:  Product=XLS OHCI Host Controller
S:  SerialNumber=ohci-xls
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms     

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.16 ehci_hcd
S:  Product=XLS EHCI Host Controller
S:  SerialNumber=ehci-xls


C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1f01 Rev= 1.02
S:  Manufacturer=HUAWEI
S:  Product=HUAWEI HiLink
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms       

Any hint why it dont detect it? or maybe this modem is not supported...

 

 

 

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Search Airheads
Showing results for 
Search instead for 
Did you mean: