Wireless Access

Reply
Contributor I
Posts: 81
Registered: ‎03-18-2013

using multiple VLANs on guest access

We have a large number of guest users in one of our hospitals. I am trying to keep the broadcast domains smaller by using multiple VLANS e.g. vlan 98 = 192.168.208.0/21 (original guest vlan) and vlan 90 = 192.168.40.0/21. I add both vlans in the VAP of the guest SSID. I see user on Captive Portal with the 192.168.40 addresses but when I look at them in the controller GUI the also show an address from the other vlan. Am I missing something here?

Guru Elite
Posts: 20,821
Registered: ‎03-29-2007

Re: using multiple VLANs on guest access

Enable "Enforce DHCP" on the AAA profile and see if you still have the same issue.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: