Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

vrrp using gui

This thread has been viewed 0 times

  • 1.  vrrp using gui

    Posted Mar 18, 2014 07:29 AM

    Hi,

    I am having 3600 controller with 6.3.1.3 os version . I would like some one to sahre the gui based setps to setup vrrp settings

    regards


    #3600


  • 2.  RE: vrrp using gui

    EMPLOYEE
    Posted Mar 18, 2014 07:32 AM

    VRRP can be found under Configuration > Advanced Services > Redundancy:

     

    VRRP.PNG



  • 3.  RE: vrrp using gui

    Posted Mar 18, 2014 07:44 AM

    Hi Tim,

    Thanks for your response.

    can I have the screen configuration shot steps for both the master and backup controller respectivly.

    regards 



  • 4.  RE: vrrp using gui

    EMPLOYEE
    Posted Mar 18, 2014 08:09 AM

    jayakumar,

     

    Both controllers will be identical except the peer address will be the other controller. 

     

    For example:

     

    Master IP = 10.1.1.2

    Backup IP = 10.1.1.3

     

    so,

     

    VRRP IP = 10.1.1.1

    Master Peer IP = 10.1.1.3

    Backup Peer IP = 10.1.1.2

     



  • 5.  RE: vrrp using gui
    Best Answer

    Posted Mar 18, 2014 08:56 AM

    The Campus VRD has the screenshots you are looking for.  They are in this section:  http://www.arubanetworks.com/vrd/CampusWNetworksVRD/Chap5_Redundancy.html#1030870.  It covers both sides of VRRP both CLI and WebUI.

     

    Example from the VRD:

    Primary:

    Primary

     

    Backup:

     

    Backup