Wireless Access

Reply
Frequent Contributor II
Posts: 479
Registered: ‎03-15-2014

what is the best scenario to configure 4 controller in the same building ?

I need to know   what is the best scenario to configire 4 controllers and they have the full license capacity for 400 access points what is the best scnario and how to do it?

Aruba
Posts: 233
Registered: ‎11-19-2009

Re: what is the best scenario to configure 4 controller in the same building ?

May I model of controller and access points ?  We may also need to understand what type of clients/application/Business cricality/application used on network/APtype of deployment so that we could better design/plan to impement WLAN.

Frequent Contributor II
Posts: 479
Registered: ‎03-15-2014

Re: what is the best scenario to configure 4 controller in the same building ?

2 controller 6000 series and 2 3600 ,can I terminate a specifeic access points on each controller for example 100 access point on each one?

Aruba
Posts: 233
Registered: ‎11-19-2009

Re: what is the best scenario to configure 4 controller in the same building ?

Yes absolutely you can load balance the access points between controller as long as AP can talk to controller and find the master.

 

You can configure LMS IP and Bkp-LMS ip from AP system profile on the controller ap-group.

 

LMS-IP -- this would be primary ip address of the master controller where AP would try to talk to and terminate GRE traffic

Bkp-LMS IP -- this would be secondary basically fail over mode when primary is not reachable or in failure.

 

 

Sriram

 

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: