what is the right port for Web lync listening port under management in Controller webUI?

[Aruba_Network_Engineer]

what is the right port for  Web lync listening port under management in Controller webUI?

From where I can get this number to be right?

[cjoseph]

This is what I found by searching the knowledgebase:  http://community.arubanetworks.com/t5/Controller-Based-WLANs/What-to-configure-on-the-controller-for-communication-with-Lync/ta-p/180468

[Aruba_Network_Engineer]

this port here is 15000 but on the deploymnet guide it is 15790 so what is the right thing

[cappalli · Accepted solution]

15790


Thanks,
Tim

[mldickson]

Under 6.4.4.15 I'm seeing the following WARNING when applying this command.

(7220-controller) (config) #web-server profile web-skype4b-listen-port http 15790
WARNING: Disable 'classify-media' CLI in access-list for better performance.

Where do I disable classify-media' ?

-Mike

[cjoseph]

"classify-media" would be in your access list for your clients.  It is an alternate approach using Heuristics if you could not use SDN API and should be disabled if you are using SDN API.

https://community.arubanetworks.com/aruba/attachments/aruba/Aruba-VRDs/4/1/Lync%20Over%20Aruba%20WiFi%20Validated%20Reference%20Design.pdf