Wireless Access

Reply
Occasional Contributor II

what means Valid and Protected SSIDs ( WIPS )

hello 

 

 

we have ssid = ssid 1,2,3,4

we want allow ssid = ssid 1,2,3 

we want block ssid = ssid 4

 

so i configured IDS General profile and IDS Unauthorized Device profile .

 

i insert ssid 1,2,3 in Valid and Protected SSIDs before running wips ap 

i checked my device. but all wifi bloked.

 

i dont understand this situation.

anyone help me please...d.pngIDS General Profilea.pngIDS Unauthorized Device 1b.pngIDS Unauthorized Device 2c.pngIDS Unauthorized Device 3

Guru Elite

Re: what means Valid and Protected SSIDs ( WIPS )

Uncheck  "Protect Misconfigured APs"

 

What kinds of clients are you trying to block from those SSIDs?

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Occasional Contributor II

Re: what means Valid and Protected SSIDs ( WIPS )

thanks for Reply

 

I want all client block ( Laptop , mobile ,wireless etc...) to connect trying ssid 4

 

and i test Uncheck  "Protect Misconfigured APs"

 

but i blocked all ssid .....  

 

what can i do ?

 

Guru Elite

Re: what means Valid and Protected SSIDs ( WIPS )

Do you want to turn off SSID 4, then?

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Occasional Contributor II

Re: what means Valid and Protected SSIDs ( WIPS )

i want to turn off ssid 1 

permit  list - ssid 1, ssid 2 , ssid 3

block list - ssid 4

 

becouse There is another office ssid near our office.

so i want block my test ssid and unblock another office ssid

Occasional Contributor II

Re: what means Valid and Protected SSIDs ( WIPS )

I FIND IT !! 

 

I configed default profile and checked " Protect SSID" and "Detect valid SSID Misuse" . 

last , add ssid4 ( i wanted block ssid ) in Valid and Protected SSIDs.

 

so i try connecting ssid4  , I CAN'T connect ssid4 and I Can connect ssid1,2,3 

 

thank you for reply my post~!  

 

Contributor I

Re: what means Valid and Protected SSIDs ( WIPS )

Hi,

 

I encountered the same problem, I need to block ssid which is not mine

 

SSID 4 was from your controller or from next office controller ?

 

Regards

Rafi

 

 

Occasional Contributor II

Re: what means Valid and Protected SSIDs ( WIPS )

Hi 

SSID 4 is from my controller

It is test Lab ssid

 

anyway

If you want block another ssid ,Enter the SSID you want to block into the Valid and Protected SSID

Or 

Dashboard > Security >Click on the SSID to block > Reclassify > Rogue> Reclassify button 

 

in my case , I applied second way in my site 

Please refer to the capture below.
I hope it helps.

그림1.png

 

Contributor I

Re: what means Valid and Protected SSIDs ( WIPS )

Hi,

Thank you for your replay,

 

please let see if i undestood you corectly,

 

If i want to block SSID (whice is not from my controller) like private router or private hotspot and the aruba controller classifiy him as suspect ruge i need to write SSID name in "Valid and Protected SSID"  ?

Because the "Valid" i thought that the meaninig is oppiste.

 

About second option by default Aruba   dont block rogue AP, how can change this ? do you have any procedure ? (if you have step by step it will be fabulous)

 

Is it posibale to block AP according to his mac address ?

 

I read the IPS manual but unfotunately i didnt understand how ?

 

Basically i cant do it  because i have  another wifi vendor in my campus, and since Aruba see  him wird and wifi he classify him as ruge.

Occasional Contributor II

Re: what means Valid and Protected SSIDs ( WIPS )

As you know, 

 

 

If i want to block SSID (whice is not from my controller) like private router or private hotspot and the aruba controller classifiy him as suspect ruge i need to write SSID name in "Valid and Protected SSID"  ?

 -> "Valid and Protected  SSID" is IDS Unauthorized Device >Adbanced's option. 

Because the "Valid" i thought that the meaninig is oppiste.

 -> I think so too

 

About second option by default Aruba   dont block rogue AP, how can change this ? do you have any procedure ? (if you have step by step it will be fabulous)

 ->I hope the screenshot below helps.

Is it posibale to block AP according to his mac address ?

-> I dont know ...sorry..

 

< my config screenshot > 

그림1.png그림2.png그림3.png그림4.png그림5.png그림6.png그림7.png그림8.png

If you click finish button at first , sometimes never ending finish loading 

but check the All profile > IDS 

It is already configured. 

I think it is bug .

 

you finish wizard , you need move to Dashboard > Security page

and Reclassify Interfering AP

Dashboard > Security >Interfering AP> Click on the SSID to permit> Reclassify > Authorized> Reclassify button 

 

 

 

    

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: