Wireless Access

Reply
New Contributor
Posts: 3
Registered: ‎01-11-2016

where can I find the bit for the security screw on an 205H AP?

I have 100 205H's and need to screw in the security screw. Can't find the right size bit anywhere.

Guru Elite
Posts: 8,774
Registered: ‎09-08-2010

Re: where can I find the bit for the security screw on an 205H AP?

Are you referring to a security screw that comes in a mount kit?

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
New Contributor
Posts: 3
Registered: ‎01-11-2016

Re: where can I find the bit for the security screw on an 205H AP?

Yes, on the side of the AP. Attaches the AP to the bracket that replaces the face plate on the wall.

Thanks,

Dave
Guru Elite
Posts: 8,774
Registered: ‎09-08-2010

Re: where can I find the bit for the security screw on an 205H AP?

It comes in the box in a little ziplock back with the two wall screws.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
New Contributor
Posts: 3
Registered: ‎01-11-2016

Re: where can I find the bit for the security screw on an 205H AP?

That is the screw. I got that. I need to tool to screw it into the bracket.
Guru Elite
Posts: 8,774
Registered: ‎09-08-2010

Re: where can I find the bit for the security screw on an 205H AP?

As mentioned in the installation guide, it is a T8H Torx security screw.



http://www.amazon.com/Security-Premium-Screwdriver-Wireless-Controller/dp/B0
05CSQIQK

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II
Posts: 16
Registered: ‎01-09-2015

Re: where can I find the bit for the security screw on an 205H AP?

Hi there,

I would like to buy some more security screws in case we lose one. Can you please give me the exact type of the M2.5x7 T8 Hex screws?

Is the screw thread UNC or UNF? What is the exact size M2.5 or M2.2? Please confirm.

 

Regards,

Martin

Aruba
Posts: 234
Registered: ‎04-27-2009

Re: where can I find the bit for the security screw on an 205H AP?

It's an M2.5. Not sure about the UNC/UNF question. Spec is attached.

/Onno
Search Airheads
Showing results for 
Search instead for 
Did you mean: