11-14-2015 08:56 AM
I have an Aruba Mobility Controller 800 running ArubaOS 188.8.131.52 and have 16 AP-121's. I have tried to create a WLAN that will use the A/N radio on a 5GHZ band, but it isn't working. I created a WLAN in the WLAN configuration tool, but after I clicked Finish, the new WLAN was nowhere to be found in the group. I have a current setup running on the b/g radios with HT on, and it seems to be running okay, but I would like the A/N radio to be enabled as well, on 5Ghz/ and 2.5 Ghz. Any thoughts would be greatly appreciated.
Solved! Go to Solution.
11-14-2015 09:17 AM
The AP-121 only has a single radio that can be either 2.4ghz or 5ghz. The RF band parameter in the AP system profile determines what band a single-band access point will broadcast on. If you change that parameter to A, all of the 121's will broadcast on 5ghz.
Alternatively If you want the AP 121's to broadcast on BOTH 2.4 and 5ghz, in the ARM profile, you can change the ARM Assignment to "Multi-Band", and it will use ARM to decide what APS are on 2.4 and where it has enough coverage, it will assign other AP-121s to the 5ghz band...
Please let me know if you have any further questions about this.
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
11-14-2015 09:22 AM
Sent from my iPhone
11-14-2015 09:23 AM