These AP's are provisioned and communicating with their respective local controllers. The problem is they are named with a standard format such as APX001-Serial Number. What we want accomplish is to rename APX001-AX00009435 to Rm230-AX00009435. What we are currently doing to identify the approximate location of these AP's is a form of triangulation.
We first run the command (7030Somewhere) # show ap database | include APX
We next run the following command (7030Somewhere) # show ap arm neighbors ap-name APX001-AX00009435 | Include Active
00:1a:1e:64:25:75 Some-A 6 24 12 90 Active 2015-11-26 09:08:45(275202
05:1k:1e:51:47:45 Some-A 6 16 18 88 Active 2015-11-26 09:08:17(254048
d8:h8:n6:b4:15:75 Some-A 1 43 12 61 Active 2015-11-26 09:08:29(347766
Then lastly we run (7030Somewhere) # show ap bss-table | include d8:h8:n6:b4:15:75
d8:h8:n6:b4:15:75 Some-A N/A 10.147.46.196 g-HT ap 1/12/20.5 0 Rm231-AJ0265325 0 29d:16h:53m:0s 1500 - 104 T
Therefore APX001-AX00009435 sees Rm231-AJ0265325 the loudest. Using this methodology we can get an approximate location for APX001-AX00009435 and deploy it in Airwave to the correct room. This process has given some good results so far but if there is a much better process that can be adopted we would appreciate any suggestions in this regard.