Wireless Water Cooler

Reply
Occasional Contributor II
Posts: 10
Registered: ‎10-28-2013

snmpwalk is not picking up the aruba *.my mibs even when specified in the snmpwalk command

trying to have nagios ask the controller for specific information on the AP's deployed in the enterprise. these people do not have access to airwave so an opensource solution was specified. tried changing to .txt and .mib still doesn't like the command. are the .my files only for airwave and/or is there a .mib file available?

Occasional Contributor I
Posts: 7
Registered: ‎03-06-2015

Re: snmpwalk is not picking up the aruba *.my mibs even when specified in the snmpwalk command

How are you specifying them on the command line? You'll need both -M and -m.

 

Norman

Occasional Contributor II
Posts: 10
Registered: ‎10-28-2013

Re: snmpwalk is not picking up the aruba *.my mibs even when specified in the snmpwalk command

Hi Norman,



Been trying a few different ones and didn't have much success. Seems when I
do only the OID # I get what I want. Maybe that's just the way to do it?



Have to admit I didn't do both until you suggested.



[root@rhmonitor01 mibs]# snmpwalk 10.3.77.103 -v2c -c generous -m all -M
./usr/share/snmp/mibs/aruba-wlan.my wlsxWlanAPTable

No log handling enabled - turning on stderr logging

wlsxWlanAPTable: Unknown Object Identifier (Sub-id not found: (top) ->
wlsxWlanAPTable)

[root@rhmonitor01 mibs]#
Search Airheads
Showing results for 
Search instead for 
Did you mean: