Wireless and RF

Reply
New Contributor
Posts: 3
Registered: ‎05-23-2008

bg clients and AP 105

I have a customer where we installed rel 3.4.0.5.

After the upgarde the bg clients have problems connecting to the AP 105. They don't have any problem connecting to AP 61.

Used controllers are 3 SC-128 en 1 M3 controller.

Any ideas:confused:
Guru Elite
Posts: 20,821
Registered: ‎03-29-2007

Re: bg clients and AP 105

The AP105 is only supported on ArubaOS 3.4.1 and above http://kb.arubanetworks.com/cgi-bin/arubanetworks.cfg/php/enduser/std_adp.php?p_faqid=948


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I
Posts: 31
Registered: ‎09-15-2009

bg clients and AP 105

Will also run on 3.3.3.x

"To deploy an AP-105, the controller must run ArubaOS 3.3.3.x or
3.4.1.x."
Guru Elite
Posts: 20,821
Registered: ‎03-29-2007

Re: bg clients and AP 105

Yes, but 3.4.0.x is not supported, is my point.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 3
Registered: ‎05-23-2008

Re: bg clients and AP 105

oeps the system is running 3.4.2.6! Sorry:rolleyes:
Guru Elite
Posts: 20,821
Registered: ‎03-29-2007

Re: bg clients and AP 105

What kind of SSID are they attempting to connect to? Is it using encryption? Can other clients connect to the AP105? What clients CAN connect to the 105?


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 3
Registered: ‎05-23-2008

Re: bg clients and AP 105

Open SSID and WPA2-AES
a clients can connect.
Guru Elite
Posts: 20,821
Registered: ‎03-29-2007

Re: bg clients and AP 105

Can the b/g clients even see the wireless network? If not please open a case so that they can get to the bottom of this.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base