Search the Community
- Global Forums
- Airheads Channel Group - UK and Ireland
- Airheads Channel Group (German speaking)
- Airheads Channel Group - France
- Airheads Channel Groep – Nederland
- Airheads Channel Group - Italy
- Airheads Channel Group - Taiwan
- Airheads Channel Group - Singapore
- Airheads Channel Group - Malaysia
- Airheads Channel Group – Norway
- Airheads Channel Group South Africa
- Airheads Channel Group Bechtle
- Aruba Support KBs
- Community KBs
- ClearPass Exchange Recipes
- Aruba Support Documentation
- Software Downloads
- Knowledge Base
- ClearPass Recipe Review
- ClearPass Recipe Submission
- Admin Tool - Assign Role in Bulk
- Admin Tool - User Search
- CWNP Conf 2015
- Airheads Conference Vegas 2015
- Wlan Pro Conference 2015
- Airheads Conference Shanghai 2014
- WLAN Pro Conf EU 2014
- CWNP Conference 2014 (Sep 22 - 24)
- Airheads Local 2014
- Wireless Field Day 7 (Aug 6-8, 2014)
- Black Hat 2014 Contest
- Airheads EMEA Italy 2014 (June 9 - 13)
- Americas Airheads Conference 2014
- WLAN Professionals Summit 2014
- Airheads Roadshow 2013
- EMEA Airheads Conference 2013
- APJ Airheads Conference 2013
- Americas Airheads Conference 2013
- Americas Airheads Conference 2012
- APJ Airheads Conference 2012
- EMEA Airheads Conference 2012
- Airheads EMEA 2012 Contest: How to Enter - Contest Terms & Conditions
- Airheads EMEA 2012 Contest: Create your Entry to Win Here!
- Airheads Conferences Prior to 2012
- Americas Airheads Local Events 2012
- EMEA Airheads Local Events 2012
- Wireless Field Day 3 @ Aruba Networks
- Wireless Tech Field Day 2- Silicon Valley
- Wi-Fi Mobility Symposium- San Jose, CA USA
- SDN Apps
- Connector Translation Testing area
Welcome to the ClearPass Policy Manager User Guide.
The ClearPass Policy Manager User Guide provides a general overview of ClearPass Policy Manager features, as well as detailed descriptions of the configuration settings used to manage and monitor your Policy Manager deployment.
The intended audience for the ClearPass Policy Manager User Guideincludes customers, partners, and Aruba
Please note that this document is not a training guide, and it is assumed that the reader has at minimum
foundational training in ClearPass Essentials and, if possible, Aruba Certified Professional (ACCP) certification.
The user of this guide should have a working knowledge of the following:
- AAA technologies (Radius, TACACS, 802.1X, MAC authentication, and Web authentication)
- Layer-2 and Layer-3 networking
- User Identity stores, such as Active Directory
- Providing information about network device configurations and capabilities is outside the scope of this guide. For information on these topics, refer to the documentation provided by the vendor of your network equipment.
- Getting Started
- If you are new to ClearPass Policy Manager, refer to the following sections:
- For a general description of ClearPass Policy Manager features, refer to the following topics in this section,
- ClearPass Access Management System Overview and Key Features.
- For a description of how to use the Dashboard, see Using the Policy Manager Dashboard on page 21.
- About ClearPass Policy Manager ClearPass Policy Manager 6.5 | User Guide
- For a list of common configuration tasks and pointers to information about how to perform each task, refer
- to Accessing Configuration Information on page 1.
- If you are planning a new ClearPass Policy Manager deployment, refer to the ClearPass Deployment Guide.
- The ClearPass Deployment Guide is organized in a way that presents the recommended sequence in which
- ClearPass deployment should take place, and makes the major deployment tasks easy to understand and implement.
EAP-TLS and EAP-PEAP are two of the most highly used authentication mechanisms on enterprise WLAN.
This presentation gives a detailed step by step procedure for setting up a Controller and CPPM for EAP-TLS & EAP-PEAP – with and without EAP termination on controller.
Importantly, it covers setting up the PKI infrastructure required for these authentication mechanisms. It also looks in to detail troubleshooting tools and commands available in both AOS & CPPM.
- Find more articles tagged with:
This document describes the Aruba Instant access point and Virtual Controller system as well as the procedure to integrate this system with AirWave. This section contains the following points:
l "Overview of Aruba Instant" on page 5
l "Instant Management with AirWave" on page 5
l "Using Aruba Instant with AirWave" on page 6
l "AMP Pages with Instant-Specific Features" on page 7
l "Supported Firmware" on page 8
Overview of Aruba Instant Aruba Instant:
(Instant) is a system of access points per Layer 2 subnet. Aruba Instant IAPs are controlled by a single IAP that serves a dual role as a primary Virtual Controller, eliminating the need for dedicated controller hardware. This system can be deployed through a simplified setup process appropriate for smaller organizations, or for multiple geographically dispersed locations without an on-site administrator. Only the first IAP/Virtual Controller you add to the network must be configured; the subsequent IAPs will all inherit the necessary configuration information from the Virtual Controller. Aruba Instant continually monitors the network to determine the IAP that should function as the Virtual Controller at any time, and the Virtual Controller will move from IAP to IAP as necessary without impacting network performance. The Virtual Controller technology in Aruba Instant is capable of IAP auto discovery, 802.1X authentication, role-based and device-based policy enforcement, rogue detection, and Adaptive Radio Management (ARM).
ArubaOS is the operating system, software suite, and application engine that operates Aruba mobility controllers and centralizes control over the entire mobile environment. The ArubaOS wizards, command-line interface (CLI), and the ArubaOS Web UI are the primary means used to configure and deploy ArubaOS. For a complete description of ArubaOS, refer to the ArubaOS User Guide for your release.
- Find more articles tagged with:
When Mobility Access Switch (MAS) devices are added to AirWave, AirWave supports group-level of those devices, the operating system, software suite, and application engine that operates mobility and centralizes control over the entire network environment.
For a complete description of ArubaOS, refer to the ArubaOS User Guide for your specific Aruba Mobility Access Switch version.
- Find more articles tagged with:
RF and Roaming Optimization for Aruba 802.11ac Networks
This Solution guide covers design recommendations and best practices to achieve best RF performance and seamless roaming on Aruba 802.11ac Networks. This solution guide is best applicable for office and university campus/dorms environments. It mainly covers four areas: 1) AP Placement, 2) RF Consideration, 3) Roaming Optimization, 4) Device Specific Recommendations.
This solution guide is designed for Aruba Mobility controllers running ArubaOS 6.3.x and later. It assumes that reader has a working knowledge of Aruba WLAN architecture and has already deployed it in an enterprise or campus environment.
...to config t and type rf then hit space which immediatly changes the command to rft, which is...
This might be a n00b problem, but I can't edit the rf arm-profiles. Im running code 184.108.40.206. I go to config t
and type rf then hit space which immediatly changes the command to rft, which is apparently an RF Troubleshooting test. When I ? at the config prompt I don't see anything for rf. All the documentation I've seen says to edit these settings you should be in config mode, then simply type rf arm-profile and the name which will allow you to edit the ARM settings. Ultimately I'm trying to change the default arm-profile setting for Client Match Band Steer G Band Max Signal (-dBm). The default is 45, Im trying to set it to 10 per the document above.
Thank you in advance.
This document provides best practices for leveraging the Rogue Access Point Detection (RAPIDS) module of the AirWave Wireless Management Suite (AWMS) to secure your network. RAPIDS is designed to identify and locate wireless threats by leveraging all of the information available from the infrastructure (see Figure 1). RAPIDS takes the information it collects and feeds it through a customizable set of classification rules, isolating the threat devices based on your security concerns. RAPIDS can be configured to alert administrators via email, SNMP traps, or syslog messages after a threat is identified.
The Indoor 802.11n Site Survey and Planning guide covers the design and installation of an Aruba WLAN. It includes information on choosing the right AP, performing a virtual survey, and performing a physical survey. The guide also covers using the Aruba Instant AP for physical site surveys.