apboot> print bootdelay=2 baudrate=9600 autoload=n boardname=Hazelburn servername=aruba-master bootcmd=boot ap autostart=yes bootfile=mips32.ari ethaddr=94:b4:0f:c3:cf:f0 ethact=eth0 gatewayip=192.168.1.1 netmask=255.255.255.0 ipaddr=192.168.1.131 dnsip=192.168.1.1 master=X.X.X.X serverip=X.X.X.X remote_ap=1 name=HOME_AP start_type=warm_start stdin=serial stdout=serial stderr=serial apboot>boot Checking image @ 0xbf100000 (bank 1) Invalid image format version: 0xffffffff Switching to flash bank: 2 Checking image @ 0xbf100000 (bank 2) Image is signed; verifying checksum... passed Signer Cert OK Policy Cert OK RSA signature verified. ELF file is 32 bit Loading .text @ 0x80e00000 (4577784 bytes) Loading .data @ 0x8125da00 (32 bytes) Clearing .bss @ 0x8125da20 (16 bytes) ## Starting application at 0x80e00000 ... Uncompressing........................................... Aruba Networks ArubaOS Version 6.4.0.0 (build 41762 / label #41762) Built by p4build@cyprus on 2014-01-16 at 01:46:18 PST (gcc version 4.3.3) CPU Rev: 2122 934x CPU flash_size passed from bootloader = 32 arg 1: mem=128M Flash variant: 32M ath_sys_frequency: cpu apb ddr apb cpu 560 ddr 429 ahb 214 Cache parity protection disabled ath_timer_init: plat time init done Using 280.000 MHz high precision timer. cycles_per_jiffy=560000 Memory: 122240k/131072k available (1697k kernel code, 8772k reserved, 646k data, 3824k init, 0k highmem) available. detected lzma initramfs initramfs: LZMA lc=3,lp=0,pb=2,dictSize=8388608,origSize=18582528 LZMA initramfs by Ming-Ching Tiew ............................................................................................................................................................................................................................................................................................ PCI init:ath_pcibios_init Returning IRQ 64 ATH GPIOC major 0 wdt: registered with refresh Enabling Watchdog Talisker RSSI LED initialization Concatenating MTD devices: (0): "bank1" (1): "bank2" into device "flash" Creating 1 MTD partitions on "flash": 0x00000000-0x02000000 : "flash" i2c /dev entries driver i2c-talisker: using default base 0x18040000 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT Starting Kernel DES KAT ...Completed Kernel DES KAT Starting Kernel AES KAT ...Completed Kernel AES KAT Starting Kernel AESGCM KAT ...Completed Kernel AESGCM KAT Domain Name: arubanetworks.com No panic info available ATHR_GMAC: RX TASKLET - Pkts per Intr:16 ATHR_GMAC: Mac address for unit 0:80737bc0 ATHR_GMAC: 94:b4:0f:c3:cf:f0 ATHR_GMAC: Mac capability flags : 42201 ATHR_GMAC: RX TASKLET - Pkts per Intr:16 ATHR_GMAC: Mac address for unit 1:80737bc0 ATHR_GMAC: 94:b4:0f:c3:cf:f1 mac:1 Registering S27.... ATHR_GMAC: Mac capability flags : 42A00 WASP ----> S17 PHY * athrs17_reg_init:done Phy setup Complete drvlog_mod: module license 'Proprietary' taints kernel. AP xml model 76, num_radios 2 (jiffies 7242) init_asap_mod: installation:0 radio 0: band 1 ant 0 max_ssid 16 radio 1: band 0 ant 0 max_ssid 16 USB is not supported on this model Starting watchdog process... Got all network params from APboot env. SkippingWASP ----> S17 PHY * DHCP athrs17_reg_init:done Setting PHY... Phy setup Complete [az] 802.3az init done.. ADDRCONF(NETDEV_UP): bond0: link is not ready 192.168.1.131 255.255.255.0 192.168.1.1 Running ADP...Done. Master is X.X.X.X Starting Webserver bind: Transport endpoint is not connected ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, PRIVATE_DIAG, WRITE_EEPROM, 11D) ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved ath_rate_atheros: Aruba Networks Rate Control Algorithm ath_dfs: Version 2.0.0 Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved ath_spectrum: Version 2.0.0 Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved ath_pci: 0.9.4.5 (Atheros/multi-bss) Restoring Cal data from Flash Reading from Addr: 0xbffe5000 ath_attach: scn 87d20280 sc 87d40000 ah 87d80000 wifi0: Base BSSID 94:b4:0f:bc:ff:10, 16 available BSSID(s) bond0 address=94:b4:0f:c3:cf:f0 br0 address=94:b4:0f:c3:cf:f0 wifi0: AP type AP-103, radio 0, max_bssids 16 wifi0: Atheros 9580: mem=0x10000000, irq=64 hw_base=0xb0000000 ath_ahb: 0.9.4.5 (Atheros/multi-bss) ath_ahb: init_ath_wmac Enterprise mode: 0x00000000 Restoring Cal data from Flash Reading from Addr: 0xbffe1000 ath_attach: scn 86000280 sc 86020000 ah 86040000 wifi1: Base BSSID 94:b4:0f:bc:ff:00, 16 available BSSID(s) bond0 address=94:b4:0f:c3:cf:f0 br0 address=94:b4:0f:c3:cf:f0 wifi1: AP type AP-103, radio 1, max_bssids 16 wifi1: Atheros 9340: mem=0xb8100000, irq=2 shutting down watchdog process (nanny will restart it)... Enet:0 port0 up athr_gmac_poll_link: unit 0 link change to up ATH_MAC_TIMER: enet unit:0 is up... Mii 1000Mbps full duplex ATH_MAC_TIMER: Done cfg2 0x7235 ifctl 0x0 miictrl ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready <<<<< Welcome to the Access Point >>>>>