Target : undefined show vpn status profile name:default -------------------------------------------------- current using tunnel :unselected tunnel current tunnel using time :0 ipsec is preempt status :disable ipsec is fast failover status :disable ipsec hold on period :600s ipsec tunnel monitor frequency (seconds/packet) :5 ipsec tunnel monitor timeout by lost packet cnt :6 ipsec reconnect duration (seconds) :30 ipsec primary tunnel crypto type :Cert ipsec primary tunnel peer address :200.237.249.178 ipsec primary tunnel peer tunnel ip :0.0.0.0 ipsec primary tunnel ap tunnel ip :0.0.0.0 ipsec primary tunnel using interface : ipsec primary tunnel using MTU :0 ipsec primary tunnel profile index :0 ipsec primary tunnel current sm status :Retrying ipsec primary tunnel tunnel status :Down ipsec primary tunnel tunnel retry times :45 ipsec primary tunnel tunnel uptime :0 ipsec backup tunnel crypto type :Cert ipsec backup tunnel peer address :N/A ipsec backup tunnel peer tunnel ip :N/A ipsec backup tunnel ap tunnel ip :N/A ipsec backup tunnel using interface :N/A ipsec backup tunnel using MTU :N/A ipsec backup tunnel current sm status :Init ipsec backup tunnel tunnel status :Down ipsec backup tunnel tunnel retry times :0 ipsec backup tunnel tunnel uptime :0 end of show vpn status ======================================================== show gre status GRE not configured - no status end of show gre status ======================================================== show upgrade info swarm upgrade status -------------------- Mac IP Address Seed AP AP Class Status Image Info --- ---------- ------- -------- ------ ---------- bc:9f:e4:c3:72:10 192.168.0.26 No Draco image-ok From Seed Auto reboot :enable Use external URL :enable Master wait Time :0 secs 0 count Switch Partition :enable Upgrade in process :No UAP convert process :No end of show upgrade info ======================================================== show log upgrade ----------Download log start---------- download log not available ----------Download log end------------ Download status: incomplete ----------Upgrade log start---------- upgrade log not available ----------Upgrade log end------------ Upgrade status: upgrade status not available end of show log upgrade ======================================================== show log rapper Feb 24, 15:09:39: Decode PEM Key length :0 Feb 24, 15:09:39: testHostKeys : status 0 Feb 24, 15:09:39: testHostKeys : free temp Certificate status 0 Feb 24, 15:09:39: CA_MGMT_EXAMPLE_computeHostKeys after testHostKeys cert-len 1713 Feb 24, 15:09:39: CA Cert index:0 is /tmp/deviceCerts/OpensslOldCA_RootCert.der Feb 24, 15:09:39: Reading CA Cert file Feb 24, 15:09:39: i=0 DER CA Cert file len:1416 Feb 24, 15:09:39: CA Cert index:1 is /tmp/deviceCerts/MSCAV1_RootCert.der Feb 24, 15:09:39: Reading CA Cert file Feb 24, 15:09:39: i=1 DER CA Cert file len:1009 Feb 24, 15:09:39: CA Cert index:2 is /tmp/deviceCerts/Aruba_EST_CA_RootCert.der Feb 24, 15:09:39: Reading CA Cert file Feb 24, 15:09:39: i=2 DER CA Cert file len:992 Feb 24, 15:09:39: Got 3 Trusted Certs Feb 24, 15:09:39: CSS CA Cert is /tmp/deviceCerts/CSS_CA_RootCert.der Feb 24, 15:09:39: Reading DER CA Cert file Feb 24, 15:09:39: Error in reading DER CA Cert:/tmp/deviceCerts/CSS_CA_RootCert.der, Ignore It Feb 24, 15:09:39: CA Cert status : 0 Before IKE_initServer Feb 24, 15:09:39: IKE_initServer: Cert length 1713 IKE_initServer: Host Certificate is set (RSA-SIG) {CN=CNHSKD52Z7::bc:9f:e4:c3:72:10} Feb 24, 15:09:39: get_ip_from_dev: interface name = br0 Feb 24, 15:09:39: get_ip_from_dev: interface name = br0 Feb 24, 15:09:39: IKE_EXAMPLE_addServer port:0 natt:0 Feb 24, 15:09:39: get_ip_from_dev: interface name = br0 Feb 24, 15:09:39: IKE_EXAMPLE_addServer:2322 dev_name br0 saddr 192.168.0.26 Feb 24, 15:09:39: IKE_EXAMPLE_addUdpSkt STARTS Feb 24, 15:09:39: IKE_EXAMPLE_addUdpSkt:2027 family is v4 hostAddr= 192.168.0.26 wHostPort = 62934 Feb 24, 15:09:39: get_ip_from_dev: interface name = br0 Feb 24, 15:09:39: srcdev_name = br0 ip 192.168.0.26 Feb 24, 15:09:39: IKE_EXAMPLE_addUdpSkt: Using SocketIndex:0 IKE_EXAMPLE: Socket created on 192.168.0.26[62934] Feb 24, 15:09:39: IKE_EXAMPLE_addServer:2380 socket descriptor is 0 port number 62934 for server instance 0 at 0th index addr 192.168.0.26 Feb 24, 15:09:39: IKE_EXAMPLE_addUdpSkt STARTS Feb 24, 15:09:39: IKE_EXAMPLE_addUdpSkt:2027 family is v4 hostAddr= 192.168.0.26 wHostPort = 62935 Feb 24, 15:09:39: get_ip_from_dev: interface name = br0 Feb 24, 15:09:39: srcdev_name = br0 ip 192.168.0.26 Feb 24, 15:09:39: IKE_EXAMPLE_addUdpSkt: Using SocketIndex:1 IKE_EXAMPLE: Socket created on 192.168.0.26[62935] Feb 24, 15:09:39: IKE_EXAMPLE_addServer:2429 socket descriptor is 1 port number 62935 for server instance 0 at 1st index addr 192.168.0.26 Feb 24, 15:09:39: IKE_EXAMPLE_addDefaultServers status:0 Feb 24, 15:09:39: setup_tunnel:5076: Setenv TUNDEV setup_tunnel successful Feb 24, 15:09:39: tunnel address = 200.237.249.178 Feb 24, 15:09:39: hostAddr = 192.168.0.26 (0.0)(pid:18472) time:2020-02-24 15:09:39 SA_INIT dest=200.237.249.178 Feb 24, 15:09:39: IKE_evtRecv: Initialize IKE SA Feb 24, 15:09:39: IKE_CUSTOM_getVersion(peerAddr:200.237.249.178): ikeVersion:2 Feb 24, 15:09:39: IKE2_evtInit:1168: peerAddr=200.237.249.178 peerAddr->family=2 Feb 24, 15:09:39: IKE_allocSa my_rapper_index 0 serverInstance 1 for 192.168.0.26 Timer ID: 1 Initialized Feb 24, 15:09:39: IKE_SA_INIT Feb 24, 15:09:39: IKE2_newSa(822): NEW SA, DhGrp 2 (0) Feb 24, 15:09:39: IKE2_newSa(peerAddr:-923928142): IKE_SA-lifetime:28000 Feb 24, 15:09:39: IKE2_getStateInfo start oExchange = 34 dir = 0 Feb 24, 15:09:39: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 I --> Feb 24, 15:09:39: I --> Feb 24, 15:09:39: construct outgoing message Feb 24, 15:09:39: initI_out : IPV4 IMPLEMENTATION Feb 24, 15:09:39: OutSa(v2-peerAddr::: pxSa->dwPeerAddr:200.237.249.178): Entered Feb 24, 15:09:39: OutSa: ike sa ENCR_AES 128-BITS ENCR_AES 256-BITS PRF_HMAC_SHA1 AUTH_HMAC_SHA1_96 DH_2 NAT_D (us): 41 c1 74 73 f0 4f 36 98 a7 c3 90 1b 53 08 0f ef 77 80 b1 96 NAT_D (peer): be cb 35 ce a8 45 92 d1 79 96 a6 1a d7 7e d1 f6 d6 c2 0c 2f Feb 24, 15:09:39: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:09:39: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:09:39: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:09:39: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:09:39: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:09:39: transmit message spi={d85d1fe24fe3c564 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (0.0)(pid:18472) time:2020-02-24 15:09:39 Feb 24, 15:09:39: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:09:39: Sending from SrcPort 62935 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:09:39: IKE_SAMPLE_ikeXchgSend Successfully setsockopt UDP_ENCAP port 62935 Feb 24, 15:09:39: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:09:39: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 2 Remote IP address = 200.237.249.178 IKE_EXAMPLE: IKE_keyConnect() started, id = 0xFeb 24, 15:09:39: IKE_EXAMPLE: IKE_keyConnect() started, id = 0x on device br0 82400ece... Feb 24, 15:09:39: papi:15200 Feb 24, 15:09:44: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 Feb 24, 15:09:44: transmit message spi={d85d1fe24fe3c564 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (5.0)(pid:18472) time:2020-02-24 15:09:44 Feb 24, 15:09:44: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:09:44: Sending from SrcPort 62935 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:09:44: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:09:44: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 0 Remote IP address = 200.237.249.178 Feb 24, 15:09:49: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 Feb 24, 15:09:49: transmit message spi={d85d1fe24fe3c564 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (10.0)(pid:18472) time:2020-02-24 15:09:49 Feb 24, 15:09:49: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:09:49: Sending from SrcPort 62935 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:09:49: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:09:49: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 0 Remote IP address = 200.237.249.178 Feb 24, 15:09:54: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 Feb 24, 15:09:54: transmit message spi={d85d1fe24fe3c564 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (15.0)(pid:18472) time:2020-02-24 15:09:54 Feb 24, 15:09:54: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:09:54: Sending from SrcPort 62935 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:09:54: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:09:54: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 0 Remote IP address = 200.237.249.178 Feb 24, 15:09:59: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 Feb 24, 15:09:59: transmit message spi={d85d1fe24fe3c564 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (20.0)(pid:18472) time:2020-02-24 15:09:59 Feb 24, 15:09:59: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:09:59: Sending from SrcPort 62935 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:09:59: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:09:59: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 0 Remote IP address = 200.237.249.178 Feb 24, 15:10:04: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 Feb 24, 15:10:04: transmit message spi={d85d1fe24fe3c564 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (25.0)(pid:18472) time:2020-02-24 15:10:04 Feb 24, 15:10:04: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:10:04: Sending from SrcPort 62935 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:10:04: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:10:04: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 0 Remote IP address = 200.237.249.178 Feb 24, 15:10:08: rapper got Signal 15 Feb 24, 15:10:08: need rapper EXIT immediately, since sometimes dispatcher loop hasn't start Feb 24, 15:10:09: get_ike_version: Use IKE Version 2 Feb 24, 15:10:09: rapper_write_pid_to_file: wrote rapper pid 18712 to file /tmp/rapper_pid_1 Feb 24, 15:10:09: papi_init papifd:6 ack:7 IKE_EXAMPLE: Starting up IKE server Feb 24, 15:10:09: IKE_init: ethmacstr = BC:9F:E4:C3:72:10 Initialized Timers IKE_init: completed after (0.0)(pid:18712) time:2020-02-24 15:10:09 seconds. Feb 24, 15:10:09: RAP using default certificates Feb 24, 15:10:09: IAP using default CA certificates Feb 24, 15:10:09: Before getting Certs Feb 24, 15:10:09: TPM enabled Feb 24, 15:10:09: get_usb_type: Unable to open /tmp/usb_type Feb 24, 15:10:09: get_usb_csr: Unable to open /tmp/usb_csr Feb 24, 15:10:09: CA_MGMT_EXAMPLE_computeHostKeys init cert-len 0 Feb 24, 15:10:09: Factory Device Cert is /tmp/deviceCerts/certifiedKeyCert.der Feb 24, 15:10:09: Reading DER Device Cert file /tmp/deviceCerts/certifiedKeyCert.der Feb 24, 15:10:09: DER Device Cert file len:1713 Feb 24, 15:10:09: Intermediate Cert index:0 is /tmp/deviceCerts/certifiedKeyCaCert.der Feb 24, 15:10:09: Reading DER Intermediate Cert file Feb 24, 15:10:09: DER Intermediate Cert file len:1118 Feb 24, 15:10:09: Intermediate Cert index:1 is /tmp/deviceCerts/caChainCert1.der Feb 24, 15:10:09: Reading DER Intermediate Cert file Feb 24, 15:10:09: DER Intermediate Cert file len:1333 Feb 24, 15:10:09: Decode PEM Key length :0 Feb 24, 15:10:09: testHostKeys : status 0 Feb 24, 15:10:09: testHostKeys : free temp Certificate status 0 Feb 24, 15:10:09: CA_MGMT_EXAMPLE_computeHostKeys after testHostKeys cert-len 1713 Feb 24, 15:10:09: CA Cert index:0 is /tmp/deviceCerts/OpensslOldCA_RootCert.der Feb 24, 15:10:09: Reading CA Cert file Feb 24, 15:10:09: i=0 DER CA Cert file len:1416 Feb 24, 15:10:09: CA Cert index:1 is /tmp/deviceCerts/MSCAV1_RootCert.der Feb 24, 15:10:09: Reading CA Cert file Feb 24, 15:10:09: i=1 DER CA Cert file len:1009 Feb 24, 15:10:09: CA Cert index:2 is /tmp/deviceCerts/Aruba_EST_CA_RootCert.der Feb 24, 15:10:09: Reading CA Cert file Feb 24, 15:10:09: i=2 DER CA Cert file len:992 Feb 24, 15:10:09: Got 3 Trusted Certs Feb 24, 15:10:09: CSS CA Cert is /tmp/deviceCerts/CSS_CA_RootCert.der Feb 24, 15:10:09: Reading DER CA Cert file Feb 24, 15:10:09: Error in reading DER CA Cert:/tmp/deviceCerts/CSS_CA_RootCert.der, Ignore It Feb 24, 15:10:09: CA Cert status : 0 Before IKE_initServer Feb 24, 15:10:09: IKE_initServer: Cert length 1713 IKE_initServer: Host Certificate is set (RSA-SIG) {CN=CNHSKD52Z7::bc:9f:e4:c3:72:10} Feb 24, 15:10:09: get_ip_from_dev: interface name = br0 Feb 24, 15:10:09: get_ip_from_dev: interface name = br0 Feb 24, 15:10:09: IKE_EXAMPLE_addServer port:0 natt:0 Feb 24, 15:10:09: get_ip_from_dev: interface name = br0 Feb 24, 15:10:09: IKE_EXAMPLE_addServer:2322 dev_name br0 saddr 192.168.0.26 Feb 24, 15:10:09: IKE_EXAMPLE_addUdpSkt STARTS Feb 24, 15:10:09: IKE_EXAMPLE_addUdpSkt:2027 family is v4 hostAddr= 192.168.0.26 wHostPort = 62936 Feb 24, 15:10:09: get_ip_from_dev: interface name = br0 Feb 24, 15:10:09: srcdev_name = br0 ip 192.168.0.26 Feb 24, 15:10:09: IKE_EXAMPLE_addUdpSkt: Using SocketIndex:0 IKE_EXAMPLE: Socket created on 192.168.0.26[62936] Feb 24, 15:10:09: IKE_EXAMPLE_addServer:2380 socket descriptor is 0 port number 62936 for server instance 0 at 0th index addr 192.168.0.26 Feb 24, 15:10:09: IKE_EXAMPLE_addUdpSkt STARTS Feb 24, 15:10:09: IKE_EXAMPLE_addUdpSkt:2027 family is v4 hostAddr= 192.168.0.26 wHostPort = 62937 Feb 24, 15:10:09: get_ip_from_dev: interface name = br0 Feb 24, 15:10:09: srcdev_name = br0 ip 192.168.0.26 Feb 24, 15:10:09: IKE_EXAMPLE_addUdpSkt: Using SocketIndex:1 IKE_EXAMPLE: Socket created on 192.168.0.26[62937] Feb 24, 15:10:09: IKE_EXAMPLE_addServer:2429 socket descriptor is 1 port number 62937 for server instance 0 at 1st index addr 192.168.0.26 Feb 24, 15:10:09: IKE_EXAMPLE_addDefaultServers status:0 Feb 24, 15:10:09: setup_tunnel:5076: Setenv TUNDEV setup_tunnel successful Feb 24, 15:10:09: tunnel address = 200.237.249.178 Feb 24, 15:10:09: hostAddr = 192.168.0.26 (0.0)(pid:18712) time:2020-02-24 15:10:09 SA_INIT dest=200.237.249.178 Feb 24, 15:10:09: IKE_evtRecv: Initialize IKE SA Feb 24, 15:10:09: IKE_CUSTOM_getVersion(peerAddr:200.237.249.178): ikeVersion:2 Feb 24, 15:10:09: IKE2_evtInit:1168: peerAddr=200.237.249.178 peerAddr->family=2 Feb 24, 15:10:09: IKE_allocSa my_rapper_index 0 serverInstance 1 for 192.168.0.26 Timer ID: 1 Initialized Feb 24, 15:10:09: IKE_SA_INIT Feb 24, 15:10:09: IKE2_newSa(822): NEW SA, DhGrp 2 (0) Feb 24, 15:10:09: IKE2_newSa(peerAddr:-923928142): IKE_SA-lifetime:28000 Feb 24, 15:10:09: IKE2_getStateInfo start oExchange = 34 dir = 0 Feb 24, 15:10:09: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 I --> Feb 24, 15:10:09: I --> Feb 24, 15:10:09: construct outgoing message Feb 24, 15:10:09: initI_out : IPV4 IMPLEMENTATION Feb 24, 15:10:09: OutSa(v2-peerAddr::: pxSa->dwPeerAddr:200.237.249.178): Entered Feb 24, 15:10:09: OutSa: ike sa ENCR_AES 128-BITS ENCR_AES 256-BITS PRF_HMAC_SHA1 AUTH_HMAC_SHA1_96 DH_2 NAT_D (us): d5 e4 b9 69 a3 27 84 58 75 66 e9 13 37 da c0 4a 49 b3 5f 6f NAT_D (peer): 8d 6a b7 53 8b c5 69 47 5c 1c eb 93 2e 7b 19 db 7d 66 17 b8 Feb 24, 15:10:09: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:10:09: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:10:09: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:10:09: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:10:09: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:10:09: transmit message spi={73ca82e5d5da1af0 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (0.0)(pid:18712) time:2020-02-24 15:10:09 Feb 24, 15:10:09: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:10:09: Sending from SrcPort 62937 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:10:09: IKE_SAMPLE_ikeXchgSend Successfully setsockopt UDP_ENCAP port 62937 Feb 24, 15:10:09: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:10:09: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 2 Remote IP address = 200.237.249.178 IKE_EXAMPLE: IKE_keyConnect() started, id = 0xFeb 24, 15:10:09: IKE_EXAMPLE: IKE_keyConnect() started, id = 0x on device br0 8c04ffc1... Feb 24, 15:10:09: papi:15200 Feb 24, 15:10:14: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 Feb 24, 15:10:14: transmit message spi={73ca82e5d5da1af0 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (5.0)(pid:18712) time:2020-02-24 15:10:14 Feb 24, 15:10:14: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:10:14: Sending from SrcPort 62937 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:10:14: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:10:14: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 0 Remote IP address = 200.237.249.178 Feb 24, 15:10:19: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 Feb 24, 15:10:19: transmit message spi={73ca82e5d5da1af0 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (10.0)(pid:18712) time:2020-02-24 15:10:19 Feb 24, 15:10:19: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:10:19: Sending from SrcPort 62937 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:10:19: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:10:19: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 0 Remote IP address = 200.237.249.178 end of show log rapper ======================================================== Target : undefined show vpn status profile name:default -------------------------------------------------- current using tunnel :unselected tunnel current tunnel using time :0 ipsec is preempt status :disable ipsec is fast failover status :disable ipsec hold on period :600s ipsec tunnel monitor frequency (seconds/packet) :5 ipsec tunnel monitor timeout by lost packet cnt :6 ipsec reconnect duration (seconds) :30 ipsec primary tunnel crypto type :Cert ipsec primary tunnel peer address :200.237.249.178 ipsec primary tunnel peer tunnel ip :0.0.0.0 ipsec primary tunnel ap tunnel ip :0.0.0.0 ipsec primary tunnel using interface : ipsec primary tunnel using MTU :0 ipsec primary tunnel profile index :0 ipsec primary tunnel current sm status :Retrying ipsec primary tunnel tunnel status :Down ipsec primary tunnel tunnel retry times :45 ipsec primary tunnel tunnel uptime :0 ipsec backup tunnel crypto type :Cert ipsec backup tunnel peer address :N/A ipsec backup tunnel peer tunnel ip :N/A ipsec backup tunnel ap tunnel ip :N/A ipsec backup tunnel using interface :N/A ipsec backup tunnel using MTU :N/A ipsec backup tunnel current sm status :Init ipsec backup tunnel tunnel status :Down ipsec backup tunnel tunnel retry times :0 ipsec backup tunnel tunnel uptime :0 end of show vpn status ======================================================== show gre status GRE not configured - no status end of show gre status ======================================================== show upgrade info swarm upgrade status -------------------- Mac IP Address Seed AP AP Class Status Image Info --- ---------- ------- -------- ------ ---------- bc:9f:e4:c3:72:10 192.168.0.26 No Draco image-ok From Seed Auto reboot :enable Use external URL :enable Master wait Time :0 secs 0 count Switch Partition :enable Upgrade in process :No UAP convert process :No end of show upgrade info ======================================================== show log upgrade ----------Download log start---------- download log not available ----------Download log end------------ Download status: incomplete ----------Upgrade log start---------- upgrade log not available ----------Upgrade log end------------ Upgrade status: upgrade status not available end of show log upgrade ======================================================== show log rapper Feb 24, 15:09:39: Decode PEM Key length :0 Feb 24, 15:09:39: testHostKeys : status 0 Feb 24, 15:09:39: testHostKeys : free temp Certificate status 0 Feb 24, 15:09:39: CA_MGMT_EXAMPLE_computeHostKeys after testHostKeys cert-len 1713 Feb 24, 15:09:39: CA Cert index:0 is /tmp/deviceCerts/OpensslOldCA_RootCert.der Feb 24, 15:09:39: Reading CA Cert file Feb 24, 15:09:39: i=0 DER CA Cert file len:1416 Feb 24, 15:09:39: CA Cert index:1 is /tmp/deviceCerts/MSCAV1_RootCert.der Feb 24, 15:09:39: Reading CA Cert file Feb 24, 15:09:39: i=1 DER CA Cert file len:1009 Feb 24, 15:09:39: CA Cert index:2 is /tmp/deviceCerts/Aruba_EST_CA_RootCert.der Feb 24, 15:09:39: Reading CA Cert file Feb 24, 15:09:39: i=2 DER CA Cert file len:992 Feb 24, 15:09:39: Got 3 Trusted Certs Feb 24, 15:09:39: CSS CA Cert is /tmp/deviceCerts/CSS_CA_RootCert.der Feb 24, 15:09:39: Reading DER CA Cert file Feb 24, 15:09:39: Error in reading DER CA Cert:/tmp/deviceCerts/CSS_CA_RootCert.der, Ignore It Feb 24, 15:09:39: CA Cert status : 0 Before IKE_initServer Feb 24, 15:09:39: IKE_initServer: Cert length 1713 IKE_initServer: Host Certificate is set (RSA-SIG) {CN=CNHSKD52Z7::bc:9f:e4:c3:72:10} Feb 24, 15:09:39: get_ip_from_dev: interface name = br0 Feb 24, 15:09:39: get_ip_from_dev: interface name = br0 Feb 24, 15:09:39: IKE_EXAMPLE_addServer port:0 natt:0 Feb 24, 15:09:39: get_ip_from_dev: interface name = br0 Feb 24, 15:09:39: IKE_EXAMPLE_addServer:2322 dev_name br0 saddr 192.168.0.26 Feb 24, 15:09:39: IKE_EXAMPLE_addUdpSkt STARTS Feb 24, 15:09:39: IKE_EXAMPLE_addUdpSkt:2027 family is v4 hostAddr= 192.168.0.26 wHostPort = 62934 Feb 24, 15:09:39: get_ip_from_dev: interface name = br0 Feb 24, 15:09:39: srcdev_name = br0 ip 192.168.0.26 Feb 24, 15:09:39: IKE_EXAMPLE_addUdpSkt: Using SocketIndex:0 IKE_EXAMPLE: Socket created on 192.168.0.26[62934] Feb 24, 15:09:39: IKE_EXAMPLE_addServer:2380 socket descriptor is 0 port number 62934 for server instance 0 at 0th index addr 192.168.0.26 Feb 24, 15:09:39: IKE_EXAMPLE_addUdpSkt STARTS Feb 24, 15:09:39: IKE_EXAMPLE_addUdpSkt:2027 family is v4 hostAddr= 192.168.0.26 wHostPort = 62935 Feb 24, 15:09:39: get_ip_from_dev: interface name = br0 Feb 24, 15:09:39: srcdev_name = br0 ip 192.168.0.26 Feb 24, 15:09:39: IKE_EXAMPLE_addUdpSkt: Using SocketIndex:1 IKE_EXAMPLE: Socket created on 192.168.0.26[62935] Feb 24, 15:09:39: IKE_EXAMPLE_addServer:2429 socket descriptor is 1 port number 62935 for server instance 0 at 1st index addr 192.168.0.26 Feb 24, 15:09:39: IKE_EXAMPLE_addDefaultServers status:0 Feb 24, 15:09:39: setup_tunnel:5076: Setenv TUNDEV setup_tunnel successful Feb 24, 15:09:39: tunnel address = 200.237.249.178 Feb 24, 15:09:39: hostAddr = 192.168.0.26 (0.0)(pid:18472) time:2020-02-24 15:09:39 SA_INIT dest=200.237.249.178 Feb 24, 15:09:39: IKE_evtRecv: Initialize IKE SA Feb 24, 15:09:39: IKE_CUSTOM_getVersion(peerAddr:200.237.249.178): ikeVersion:2 Feb 24, 15:09:39: IKE2_evtInit:1168: peerAddr=200.237.249.178 peerAddr->family=2 Feb 24, 15:09:39: IKE_allocSa my_rapper_index 0 serverInstance 1 for 192.168.0.26 Timer ID: 1 Initialized Feb 24, 15:09:39: IKE_SA_INIT Feb 24, 15:09:39: IKE2_newSa(822): NEW SA, DhGrp 2 (0) Feb 24, 15:09:39: IKE2_newSa(peerAddr:-923928142): IKE_SA-lifetime:28000 Feb 24, 15:09:39: IKE2_getStateInfo start oExchange = 34 dir = 0 Feb 24, 15:09:39: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 I --> Feb 24, 15:09:39: I --> Feb 24, 15:09:39: construct outgoing message Feb 24, 15:09:39: initI_out : IPV4 IMPLEMENTATION Feb 24, 15:09:39: OutSa(v2-peerAddr::: pxSa->dwPeerAddr:200.237.249.178): Entered Feb 24, 15:09:39: OutSa: ike sa ENCR_AES 128-BITS ENCR_AES 256-BITS PRF_HMAC_SHA1 AUTH_HMAC_SHA1_96 DH_2 NAT_D (us): 41 c1 74 73 f0 4f 36 98 a7 c3 90 1b 53 08 0f ef 77 80 b1 96 NAT_D (peer): be cb 35 ce a8 45 92 d1 79 96 a6 1a d7 7e d1 f6 d6 c2 0c 2f Feb 24, 15:09:39: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:09:39: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:09:39: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:09:39: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:09:39: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:09:39: transmit message spi={d85d1fe24fe3c564 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (0.0)(pid:18472) time:2020-02-24 15:09:39 Feb 24, 15:09:39: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:09:39: Sending from SrcPort 62935 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:09:39: IKE_SAMPLE_ikeXchgSend Successfully setsockopt UDP_ENCAP port 62935 Feb 24, 15:09:39: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:09:39: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 2 Remote IP address = 200.237.249.178 IKE_EXAMPLE: IKE_keyConnect() started, id = 0xFeb 24, 15:09:39: IKE_EXAMPLE: IKE_keyConnect() started, id = 0x on device br0 82400ece... Feb 24, 15:09:39: papi:15200 Feb 24, 15:09:44: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 Feb 24, 15:09:44: transmit message spi={d85d1fe24fe3c564 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (5.0)(pid:18472) time:2020-02-24 15:09:44 Feb 24, 15:09:44: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:09:44: Sending from SrcPort 62935 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:09:44: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:09:44: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 0 Remote IP address = 200.237.249.178 Feb 24, 15:09:49: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 Feb 24, 15:09:49: transmit message spi={d85d1fe24fe3c564 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (10.0)(pid:18472) time:2020-02-24 15:09:49 Feb 24, 15:09:49: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:09:49: Sending from SrcPort 62935 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:09:49: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:09:49: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 0 Remote IP address = 200.237.249.178 Feb 24, 15:09:54: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 Feb 24, 15:09:54: transmit message spi={d85d1fe24fe3c564 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (15.0)(pid:18472) time:2020-02-24 15:09:54 Feb 24, 15:09:54: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:09:54: Sending from SrcPort 62935 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:09:54: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:09:54: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 0 Remote IP address = 200.237.249.178 Feb 24, 15:09:59: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 Feb 24, 15:09:59: transmit message spi={d85d1fe24fe3c564 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (20.0)(pid:18472) time:2020-02-24 15:09:59 Feb 24, 15:09:59: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:09:59: Sending from SrcPort 62935 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:09:59: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:09:59: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 0 Remote IP address = 200.237.249.178 Feb 24, 15:10:04: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 Feb 24, 15:10:04: transmit message spi={d85d1fe24fe3c564 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (25.0)(pid:18472) time:2020-02-24 15:10:04 Feb 24, 15:10:04: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:10:04: Sending from SrcPort 62935 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:10:04: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:10:04: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 0 Remote IP address = 200.237.249.178 Feb 24, 15:10:08: rapper got Signal 15 Feb 24, 15:10:08: need rapper EXIT immediately, since sometimes dispatcher loop hasn't start Feb 24, 15:10:09: get_ike_version: Use IKE Version 2 Feb 24, 15:10:09: rapper_write_pid_to_file: wrote rapper pid 18712 to file /tmp/rapper_pid_1 Feb 24, 15:10:09: papi_init papifd:6 ack:7 IKE_EXAMPLE: Starting up IKE server Feb 24, 15:10:09: IKE_init: ethmacstr = BC:9F:E4:C3:72:10 Initialized Timers IKE_init: completed after (0.0)(pid:18712) time:2020-02-24 15:10:09 seconds. Feb 24, 15:10:09: RAP using default certificates Feb 24, 15:10:09: IAP using default CA certificates Feb 24, 15:10:09: Before getting Certs Feb 24, 15:10:09: TPM enabled Feb 24, 15:10:09: get_usb_type: Unable to open /tmp/usb_type Feb 24, 15:10:09: get_usb_csr: Unable to open /tmp/usb_csr Feb 24, 15:10:09: CA_MGMT_EXAMPLE_computeHostKeys init cert-len 0 Feb 24, 15:10:09: Factory Device Cert is /tmp/deviceCerts/certifiedKeyCert.der Feb 24, 15:10:09: Reading DER Device Cert file /tmp/deviceCerts/certifiedKeyCert.der Feb 24, 15:10:09: DER Device Cert file len:1713 Feb 24, 15:10:09: Intermediate Cert index:0 is /tmp/deviceCerts/certifiedKeyCaCert.der Feb 24, 15:10:09: Reading DER Intermediate Cert file Feb 24, 15:10:09: DER Intermediate Cert file len:1118 Feb 24, 15:10:09: Intermediate Cert index:1 is /tmp/deviceCerts/caChainCert1.der Feb 24, 15:10:09: Reading DER Intermediate Cert file Feb 24, 15:10:09: DER Intermediate Cert file len:1333 Feb 24, 15:10:09: Decode PEM Key length :0 Feb 24, 15:10:09: testHostKeys : status 0 Feb 24, 15:10:09: testHostKeys : free temp Certificate status 0 Feb 24, 15:10:09: CA_MGMT_EXAMPLE_computeHostKeys after testHostKeys cert-len 1713 Feb 24, 15:10:09: CA Cert index:0 is /tmp/deviceCerts/OpensslOldCA_RootCert.der Feb 24, 15:10:09: Reading CA Cert file Feb 24, 15:10:09: i=0 DER CA Cert file len:1416 Feb 24, 15:10:09: CA Cert index:1 is /tmp/deviceCerts/MSCAV1_RootCert.der Feb 24, 15:10:09: Reading CA Cert file Feb 24, 15:10:09: i=1 DER CA Cert file len:1009 Feb 24, 15:10:09: CA Cert index:2 is /tmp/deviceCerts/Aruba_EST_CA_RootCert.der Feb 24, 15:10:09: Reading CA Cert file Feb 24, 15:10:09: i=2 DER CA Cert file len:992 Feb 24, 15:10:09: Got 3 Trusted Certs Feb 24, 15:10:09: CSS CA Cert is /tmp/deviceCerts/CSS_CA_RootCert.der Feb 24, 15:10:09: Reading DER CA Cert file Feb 24, 15:10:09: Error in reading DER CA Cert:/tmp/deviceCerts/CSS_CA_RootCert.der, Ignore It Feb 24, 15:10:09: CA Cert status : 0 Before IKE_initServer Feb 24, 15:10:09: IKE_initServer: Cert length 1713 IKE_initServer: Host Certificate is set (RSA-SIG) {CN=CNHSKD52Z7::bc:9f:e4:c3:72:10} Feb 24, 15:10:09: get_ip_from_dev: interface name = br0 Feb 24, 15:10:09: get_ip_from_dev: interface name = br0 Feb 24, 15:10:09: IKE_EXAMPLE_addServer port:0 natt:0 Feb 24, 15:10:09: get_ip_from_dev: interface name = br0 Feb 24, 15:10:09: IKE_EXAMPLE_addServer:2322 dev_name br0 saddr 192.168.0.26 Feb 24, 15:10:09: IKE_EXAMPLE_addUdpSkt STARTS Feb 24, 15:10:09: IKE_EXAMPLE_addUdpSkt:2027 family is v4 hostAddr= 192.168.0.26 wHostPort = 62936 Feb 24, 15:10:09: get_ip_from_dev: interface name = br0 Feb 24, 15:10:09: srcdev_name = br0 ip 192.168.0.26 Feb 24, 15:10:09: IKE_EXAMPLE_addUdpSkt: Using SocketIndex:0 IKE_EXAMPLE: Socket created on 192.168.0.26[62936] Feb 24, 15:10:09: IKE_EXAMPLE_addServer:2380 socket descriptor is 0 port number 62936 for server instance 0 at 0th index addr 192.168.0.26 Feb 24, 15:10:09: IKE_EXAMPLE_addUdpSkt STARTS Feb 24, 15:10:09: IKE_EXAMPLE_addUdpSkt:2027 family is v4 hostAddr= 192.168.0.26 wHostPort = 62937 Feb 24, 15:10:09: get_ip_from_dev: interface name = br0 Feb 24, 15:10:09: srcdev_name = br0 ip 192.168.0.26 Feb 24, 15:10:09: IKE_EXAMPLE_addUdpSkt: Using SocketIndex:1 IKE_EXAMPLE: Socket created on 192.168.0.26[62937] Feb 24, 15:10:09: IKE_EXAMPLE_addServer:2429 socket descriptor is 1 port number 62937 for server instance 0 at 1st index addr 192.168.0.26 Feb 24, 15:10:09: IKE_EXAMPLE_addDefaultServers status:0 Feb 24, 15:10:09: setup_tunnel:5076: Setenv TUNDEV setup_tunnel successful Feb 24, 15:10:09: tunnel address = 200.237.249.178 Feb 24, 15:10:09: hostAddr = 192.168.0.26 (0.0)(pid:18712) time:2020-02-24 15:10:09 SA_INIT dest=200.237.249.178 Feb 24, 15:10:09: IKE_evtRecv: Initialize IKE SA Feb 24, 15:10:09: IKE_CUSTOM_getVersion(peerAddr:200.237.249.178): ikeVersion:2 Feb 24, 15:10:09: IKE2_evtInit:1168: peerAddr=200.237.249.178 peerAddr->family=2 Feb 24, 15:10:09: IKE_allocSa my_rapper_index 0 serverInstance 1 for 192.168.0.26 Timer ID: 1 Initialized Feb 24, 15:10:09: IKE_SA_INIT Feb 24, 15:10:09: IKE2_newSa(822): NEW SA, DhGrp 2 (0) Feb 24, 15:10:09: IKE2_newSa(peerAddr:-923928142): IKE_SA-lifetime:28000 Feb 24, 15:10:09: IKE2_getStateInfo start oExchange = 34 dir = 0 Feb 24, 15:10:09: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 I --> Feb 24, 15:10:09: I --> Feb 24, 15:10:09: construct outgoing message Feb 24, 15:10:09: initI_out : IPV4 IMPLEMENTATION Feb 24, 15:10:09: OutSa(v2-peerAddr::: pxSa->dwPeerAddr:200.237.249.178): Entered Feb 24, 15:10:09: OutSa: ike sa ENCR_AES 128-BITS ENCR_AES 256-BITS PRF_HMAC_SHA1 AUTH_HMAC_SHA1_96 DH_2 NAT_D (us): d5 e4 b9 69 a3 27 84 58 75 66 e9 13 37 da c0 4a 49 b3 5f 6f NAT_D (peer): 8d 6a b7 53 8b c5 69 47 5c 1c eb 93 2e 7b 19 db 7d 66 17 b8 Feb 24, 15:10:09: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:10:09: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:10:09: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:10:09: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:10:09: RAPPER_ERROR_FILE doesn't exist Feb 24, 15:10:09: transmit message spi={73ca82e5d5da1af0 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (0.0)(pid:18712) time:2020-02-24 15:10:09 Feb 24, 15:10:09: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:10:09: Sending from SrcPort 62937 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:10:09: IKE_SAMPLE_ikeXchgSend Successfully setsockopt UDP_ENCAP port 62937 Feb 24, 15:10:09: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:10:09: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 2 Remote IP address = 200.237.249.178 IKE_EXAMPLE: IKE_keyConnect() started, id = 0xFeb 24, 15:10:09: IKE_EXAMPLE: IKE_keyConnect() started, id = 0x on device br0 8c04ffc1... Feb 24, 15:10:09: papi:15200 Feb 24, 15:10:14: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 Feb 24, 15:10:14: transmit message spi={73ca82e5d5da1af0 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (5.0)(pid:18712) time:2020-02-24 15:10:14 Feb 24, 15:10:14: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:10:14: Sending from SrcPort 62937 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:10:14: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:10:14: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 0 Remote IP address = 200.237.249.178 Feb 24, 15:10:19: IKE2_xchgOut:(226): IPV4 IMPLEMENTATION ctx->dwBufferSize=0 ctx->bUseNattPort=0 Feb 24, 15:10:19: transmit message spi={73ca82e5d5da1af0 0000000000000000} np=SA exchange=IKE_SA_INIT msgid=0 len=388 #SEND 392 bytes to 200.237.249.178[4500] (10.0)(pid:18712) time:2020-02-24 15:10:19 Feb 24, 15:10:19: IKE_SAMPLE_ikeXchgSend:2726:V4 IMPLEMENATION dwPeerAddr=200.237.249.178 bUseNattPort=1 Feb 24, 15:10:19: Sending from SrcPort 62937 ---> DstPort 4500 myAddr = 192.168.0.26 Feb 24, 15:10:19: send message: dwPeerAddr=200.237.249.178, wPeerPort=4500, pBuffer=, dwBufferSize=392 Feb 24, 15:10:19: UDP_sendTo successful IKE_EXAMPLE: UDP_sendTo() successful, status = 0 sendto() returns 0 Remote IP address = 200.237.249.178 end of show log rapper ========================================================