full-setup Are you sure that you want to stop auto-provisioning and start full setup dialog? (yes/no): yes ***************** Welcome to the Aruba7005 setup dialog ***************** This dialog will help you to set the basic configuration for the switch. These settings, except for the Country Code, can later be changed from the Command Line Interface or Graphical User Interface. Commands: Submit input or use [default value], Help Back, Forward, Line begin, Line end Delete, Delete back, Delete to end of line Previous question Restart beginning Reload box Enter System name [Aruba7005]: Enter Switch Role (standalone|md) [md]: st The switch can be configured as standalone or md (managed device). If this is the only switch in your network, it should be configured as standalone. If this switch gets its configuration and license limits from a master switch, it should be configured as managed device. Enter Switch Role (standalone|md) [md]: standalone Enter Controller VLAN ID [1]: Enter Controller VLAN port [GE 0/0/0]: Enter Controller VLAN port mode (access|trunk) [access]: Enter VLAN interface IP address [172.16.0.254]: Enter VLAN interface subnet mask [255.255.255.0]: Enter IP Default gateway [none]: Do you wish to configure IPV6 address on vlan (yes|no) [yes]: no This controller is restricted, please enter country code (US|PR|GU|VI|MP|AS|FM|MH) [US]: You have chosen Country code US for United States (yes|no)?: ysYou have chosen Country code US for United States (yes|no)?: yes Enter the controller's IANA Time zone [America/Los_Angeles]: America/New_York Enter Time in UTC [10:53:53]: 10:54:53 Enter Date (MM/DD/YYYY) [6/6/2019]: Enter Password for admin login (up to 32 chars): ******** Re-type Password for admin login: ******** Current choices are: System name: Aruba7005 Switch Role: standalone Controller VLAN id: 1 Controller VLAN port: GE 0/0/0 Controller VLAN port mode: access VLAN interface IP address: 172.16.0.254 VLAN interface subnet mask: 255.255.255.0 Option to configure VLAN interface IPV6 address: no Country code: US IANA Time Zone: America/New_York If you accept the changes the switch will restart! Type to go back and change answer for any question Do you wish to accept the changes (yes|no)yes Creating configuration... Done. System will now restart! [10:55:10]:Starting rebootme [10:55:10]:Shutdown processing started [10:55:19]:Starting database backup [10:55:19]:Syncing data... ................................ [10:55:56]:done. [10:55:56]:Shutting down database server [10:56:03]:Starting Time sync [10:56:03]:Time sync [Done] [10:56:03]:kill all process [10:56:07]:Sending SIGSTP to all processes [10:56:07]:Sending SIGKILL to all processes Please stand by while rebooting the system. Stage 1 Loader 1.0.5.0-FIPS (build 56554) Built: 2016-09-22 at 05:41:19 Secure Boot Enabled on the Processor Bank: Primary CPLD: rev: 3.2 (0x10:002c) PRID: 000C1203 POWER ON RESET CFG:C3C0FE2 Initialized I2C0 Controller. Initialized I2C1 Controller. SPD Rev:0x11 DIMM:0 Type:2 Speed:666MHz #Rank:1 DDR3: Node 0 Channel 0 Mem size = 4096 MB UDIMM set freq:666666 DDR3: Node 0 DRAM frequency 666 MHz DDR3: Node 0 CPU frequency 500 MHz mtb_ps:125 clock:1500 trc:33 trcd:9 trp:9 AP3:A0CFFF0 ODTP1:10000 Board DDR VDD set to 1.35V. N:0 CH:0 additional rdlvl rdly:1 N:0 Ch:0 m:32 s:32 R OK. Rank:0 HW WLVL Passed Mask:1FF AP3:A0CFFF0 ODTP1:10000 n:0 ch:0 RTT WR:0200 ===N:0 Ch:0 m:32 s:32 RW OK. Node:0 Ch:0 TGE Set Memory:4096 MB value:FF FF -- PASS Node:0 Ch:0 TGE Set Memory:4096 MB value:FF 00 -- PASS Node:0 Ch:0 TGE Set Memory:4096 MB value:AA 55 -- PASS Node:0 Ch:0 TGE Set Memory:4096 MB value:00 00 -- PASS DDR3 Initialization Passed. NBU0 DRAM BAR0 base: 00000000 limit: 0013f000 xlate: 00000001 node: 00000000 ( 0 MB -> 320 MB, size: 320 MB) NBU0 DRAM BAR1 base: 001d0000 limit: 00bff000 xlate: 00090001 node: 00000000 ( 464 MB -> 3072 MB, size: 2608 MB) NBU0 DRAM BAR2 base: 00e00000 limit: 0128f000 xlate: 00290001 node: 00000000 ( 3584 MB -> 4752 MB, size: 1168 MB) CPBoot 1.0.7.0-FIPS (build 56554) Built: 2016-09-22 at 05:27:32 DRAM: 4 GB CPLD: rev: 3.2 (2c) Flash: 16 MB PCIE (B0:D01:F0) : No Link. Pwr Mngr: 24 Power: 802.3af POE Ext USB DisabledBank: Primary Board: A7005 CPU: XLP208 Rev B1 (Secure Boot) Clock: Core 500 MHz / SoC 500 MHz (0c3c0fe2) Reboot code: 0:2:10:56:20 Proto :5 Net: ge-3, ge-2, ge-1, ge-0 FIPS POST: PASS Inventory Verification: PASS Hit Ctrl + X key to stop autoboot: 2 1 0 USB0: setting speed to USB_SPEED_HIGH 2 USB Device(s) found #1 Storage Device(s) found ##Loading image 0:1#################### Image is signed; verifying checksum... passed SHA2 Signature available Signer Cert OK Policy Cert OK RSA signature verified using SHA2. [ 0.000000] 0:xlp_napi_vc_mask 0xf [ 0.000000] 0:sae frequency is 250 [ 0.000000] 0:nlm_hal_set_sae_engine_sel: xlp2xx return [ 0.000000] 0:-- SAE Frequency set to 250 [ 0.000000] 0:cde frequency is 333 [ 0.000000] 0:CDE Frequency set to 333MHz [ 0.000000] 0:MSGRING_NAPI: Initializing NLM NAPI subsystem [10:57:47]:...Starting rcS... Aruba Networks ArubaOS Version 6.5.4.12-FIPS (build 68902 / label #68902) Built by p4build@pr-hpn-build08 on 2019-01-29 at 21:58:14 UTC (gcc version 4.4.5) (c) Copyright 2019 Hewlett Packard Enterprise Development LP. <<<<< Welcome to Aruba Networks - Aruba A7005-US >>>>> [10:57:54]:Probing for EEPROM devices [ OK ] [10:57:54]:Probing for real-time clock [ OK ] [10:57:54]:Uncompressing core image files [ OK ] [10:59:07]:Extracting corefs [ OK ] [10:59:13]:Enabling watchdog [ OK ] [10:59:13]:Starting device manager Performing eUSB Flash fast test... [ DONE ] [ OK ] [10:59:14]:Mounting flash [ OK ] [10:59:15]:Initializing 511MB as swap on zRam0 [ OK ] [10:59:17]:Turning swap ON on zRAM0 [ OK ] [10:59:17]:Checking system inventory [ OK ] [10:59:17]:Installing ancillary FS [ OK ] Performing integrity check on ancillary partition 1 [ OK ] [10:59:20]:Reboot Cause: User reboot (Intent:cause:register 78:86:0:2c) [10:59:20]:Starting syslog service [ OK ] [10:59:21]:Restoring the database [ OK ] [10:59:30]:Generating SSH keys [ OK ] [10:59:30]:Initializing TPM and certificates [ OK ] [10:59:59]:Checking for configuration upgrade [ FAIL ] [11:00:00]:rcS Done(133 sec) [11:00:00]:Starting OS services [ OK ] Starting FIPS Aruba Cryptographic KAT test Completed FIPS Aruba Cryptographic KAT test successfully. Reading configuration from default.cfg Retrieving Configuration...will take approximately 1 minute Starting OpenSSL FIPS KAT test (Aruba7005) User: Completed OpenSSL FIPS KAT test successfully. admin Password: ******** (Aruba7005) >en Password:******** Password: Password:********** Password: Password: Password: Password: