show ap-group <nameofgroup-RAP-is-in>

show ap wired-port-profile <nameofprofile-applied-to-eth1>

show ap wired-ap-profile <nameofprofile-applied-to-port-profile-above>

show aaa profile <nameofprofile-applied-to-wired-port-profile-above?>


------------------------------------------------------------------------------

(CONTROLLER NAME) # show ap-group SCDC-RAP-Group

AP group "SCDC-RAP-Group"
-------------------------
Parameter                                Value
---------                                -----
Virtual AP                               Virtual AP RAP
802.11a radio profile                    default
802.11g radio profile                    default
Ethernet interface 0 port configuration  default
Ethernet interface 1 port configuration  default
Ethernet interface 2 port configuration  shutdown
Ethernet interface 3 port configuration  shutdown
Ethernet interface 4 port configuration  shutdown
AP system profile                        default
VoIP Call Admission Control profile      default
802.11a Traffic Management profile       N/A
802.11g Traffic Management profile       N/A
Regulatory Domain profile                default
RF Optimization profile                  default
RF Event Thresholds profile              default
IDS profile                              default
Mesh Radio profile                       default
Mesh Cluster profile                     N/A
Provisioning profile                     N/A
AP authorization profile                 default

(CONTROLLER NAME) #show ap wired-port-profile default

AP wired port profile "default"
-------------------------------
Parameter                                   Value
---------                                   -----
Wired AP profile                            RAP TEST
Ethernet interface link profile             default
Shut down?                                  No
Remote-AP Backup                            Enabled
AAA Profile                                 SCDC_RAP
Bridge Role                                 N/A
Time to wait for authentication to succeed  20 sec

(CONTROLLER NAME) # show ap wired-ap-profile RAP TEST

**This command isn't working (think it might have something to do with the space in the profile name) so have outlined all settings, below**

Wired AP Enable 		Ticked
Switchport Mode			Access
Trunk Mode native VLAN		1
Trusted				Unticked
Forward mode			tunnel
Access mode VLAN		*Network VLAN that can hand out addresses*
Trunk mode allowed VLANs	1-4094
Broadcast			Ticked

(CONTROLLER NAME) #show aaa profile SCDC_RAP

AAA Profile "SCDC_RAP"
----------------------
Parameter                           Value
---------                           -----
Initial role                        authenticated
MAC Authentication Profile          N/A
MAC Authentication Default Role     authenticated
MAC Authentication Server Group     default
802.1X Authentication Profile       N/A
802.1X Authentication Default Role  authenticated
802.1X Authentication Server Group  N/A
L2 Authentication Fail Through      Disabled
RADIUS Accounting Server Group      N/A
RADIUS Interim Accounting           Disabled
XML API server                      N/A
RFC 3576 server                     N/A
User derivation rules               N/A
Wired to Wireless Roaming           Enabled
SIP authentication role             N/A
Device Type Classification          Enabled
Enforce DHCP                        Disabled