APBoot 1.4.0.3 (build 37726) Built: 2013-03-21 at 20:13:41 Model: AP-10x CPU: AR7161 revision: A2 Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz DRAM: 128 MB POST1: passed Copy: done Flash: 16 MB PCI: scanning bus 0 ... dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3 00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000 01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000 Net: eth0 Radio: ar922x#0, ar922x#1 Hit to stop autoboot: 0 Booting OS partition 0 Checking image @ 0xbf100000 Image is signed; verifying checksum... passed Signer Cert OK Policy Cert OK RSA signature verified. ELF file is 32 bit Loading .text @ 0x80e00000 (4786888 bytes) Loading .data @ 0x81290ad0 (32 bytes) Clearing .bss @ 0x81290af0 (16 bytes) ## Starting application at 0x80e00000 ... Uncompressing............................................. Dell ArubaOS Version 6.4.2.9 (build 50698 / label #50698) Built by p4build@formentera.arubanetworks.com on 2015-07-03 at 08:06:43 PDT (gcc version 4.3.3) CPU Rev: aa 71x CPU Flash variant: default Cache parity protection disabled Using 340.000 MHz high precision timer. cycles_per_jiffy=680000 Memory: 121728k/131072k available (1698k kernel code, 9288k reserved, 689k data, 4024k init, 0k highmem) available. detected lzma initramfs initramfs: LZMA lc=3,lp=0,pb=2,dictSize=8388608,origSize=19324416 LZMA initramfs by Ming-Ching Tiew ......[snip] AR7100 GPIOC major 0 wdt: registered with refresh Enabling Watchdog Talisker RSSI LED initialization Creating 1 MTD partitions on "ar7100-nor0": 0x00000000-0x01000000 : "flash" i2c /dev entries driver i2c-talisker: using default base 0x18040000 AD7416 driver probing for devices on AR7100 I2C .<6>lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT Starting Kernel DES KAT ...Completed Kernel DES KAT Starting Kernel AES KAT ...Completed Kernel AES KAT Starting Kernel AESGCM KAT ...Completed Kernel AESGCM KAT Domain Name: dell-pcw.com No panic info available Testing TPM... Passed ag7100_mod: module license 'unspecified' taints kernel. AG7100: Length per segment 512 AG7100: Max segments per packet 4 AG7100: Max tx descriptor count 400 AG7100: Max rx descriptor count 252 AG7100: fifo cfg 3 018001ff AG7100CHH: Mac address for unit 0 AG7100CHH: 24:de:c6:cd:74:62 ATHRF1: Port 0, Neg Success ATHRF1: unit 0 phy addr 0 ATHRF1: reg0 0 AP xml model 39, num_radios 2 (jiffies 5750) init_asap_mod: installation:0 radio 0: band 1 ant 0 max_ssid 8 radio 1: band 0 ant 0 max_ssid 8 Starting watchdog process... ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, PRIVATE_DIAG, WRITE_EEPROM, 11D) ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved ath_rate_atheros: Aruba Networks Rate Control Algorithm ath_dfs: Version 2.0.0 Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved ath_spectrum: Version 2.0.0 Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved ath_pci: 0.9.4.5 (Atheros/multi-bss) ath_attach: scn 87c60280 sc 87c80000 ah 87cc0000 wifi0: Base BSSID 24:de:c6:57:46:28, 8 available BSSID(s) bond0 address=24:de:c6:cd:74:62 br0 address=24:de:c6:cd:74:62 wifi0: AP type AP-105, radio 0, max_bssids 8 wifi0: Atheros 9280: mem=0x10010000, irq=49 hw_base=0xb0010000 ath_attach: scn 87f40280 sc 87f60000 ah 87f80000 wifi1: Base BSSID 24:de:c6:57:46:20, 8 available BSSID(s) bond0 address=24:de:c6:cd:74:62 br0 address=24:de:c6:cd:74:62 wifi1: AP type AP-105, radio 1, max_bssids 8 wifi1: Atheros 9280: mem=0x10000000, irq=48 hw_base=0xb0000000 ath_ahb: 0.9.4.5 (Atheros/multi-bss) Starting FIPS KAT ... Failed FIPS KAT. cat: /tmp/master: No such file or directory shutting down watchdog process (nanny will restart it)... <<<<< Welcome to the Access Point >>>>> ~ # [[[ About 15 seconds wait ]]] ag7100_ring_alloc Allocated 4800 at 0x876e4000 ag7100_ring_alloc Allocated 3024 at 0x866ff000 AG7100: cfg1 0xf cfg2 0x7014 ATHRF1: Port 0, Neg Success ATHRF1: unit 0 phy addr 0 ATHRF1: reg0 3100 AG7100: unit 0 phy is up...RGMii 1000Mbps full duplex AG7100: pll reg 0x18050010: 0x110000 AG7100: cfg_1: 0x1ff0000 AG7100: cfg_2: 0x3ff AG7100: cfg_3: 0x18001ff AG7100: cfg_4: 0xffff AG7100: cfg_5: 0xfffef AG7100: done cfg2 0x7215 ifctl 0x0 miictrl 0x22 Writing 4 802.1X: User 'aruba' authentication success [[[ About 90 seconds wait ]]] The system is going down NOW !! Sending SIGTERM to all processes. Please stand by while rebooting the system. Restarting system. .