Hit to stop autoboot: 0 apboot> apboot> apboot> apboot> factory_reset Clearing state... Checking OS image and flags Invalid image format version: 0xffffffff Continuing with OS clear Erasing flash sector @ 0xbf100000....done Erased 1 sectors Erasing flash sector @ 0xbff90000....done Erased 1 sectors Erasing flash sector @ 0xbffb0000....done Erased 1 sectors Erasing flash sector @ 0xbffd0000....done Erased 1 sectors done Purging environment... Un-Protected 1 sectors .done Erased 1 sectors Writing done apboot> boot Checking image @ 0xbf100000 (bank 1) Invalid image format version: 0xffffffff Switching to flash bank: 2 Checking image @ 0xbf100000 (bank 2) Image is signed; verifying checksum... passed Signer Cert OK Policy Cert OK RSA signature verified. ELF file is 32 bit Loading .text @ 0x80e00000 (4577784 bytes) Loading .data @ 0x8125da00 (32 bytes) Clearing .bss @ 0x8125da20 (16 bytes) ## Starting application at 0x80e00000 ... Uncompressing........................................... Aruba Networks ArubaOS Version 6.4.0.0 (build 41762 / label #41762) Built by p4build@cyprus on 2014-01-16 at 01:46:18 PST (gcc version 4.3.3) CPU Rev: 2122 934x CPU flash_size passed from bootloader = 32 arg 1: mem=128M Flash variant: 32M ath_sys_frequency: cpu apb ddr apb cpu 560 ddr 430 ahb 215 Cache parity protection disabled ath_timer_init: plat time init done Using 280.000 MHz high precision timer. cycles_per_jiffy=560000 Memory: 122240k/131072k available (1697k kernel code, 8772k reserved, 646k data, 3824k init, 0k highmem) available. detected lzma initramfs initramfs: LZMA lc=3,lp=0,pb=2,dictSize=8388608,origSize=18582528 LZMA initramfs by Ming-Ching Tiew ............................................................................................................................................................................................................................................................................................ PCI init:ath_pcibios_init Returning IRQ 64 ATH GPIOC major 0 wdt: registered with refresh Enabling Watchdog Talisker RSSI LED initialization Concatenating MTD devices: (0): "bank1" (1): "bank2" into device "flash" Creating 1 MTD partitions on "flash": 0x00000000-0x02000000 : "flash" i2c /dev entries driver i2c-talisker: using default base 0x18040000 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT Starting Kernel DES KAT ...Completed Kernel DES KAT Starting Kernel AES KAT ...Completed Kernel AES KAT Starting Kernel AESGCM KAT ...Completed Kernel AESGCM KAT Domain Name: arubanetworks.com No panic info available apfcutil: sector CACHE: Cache uninitialized apfcutil: sector RAP: Cache uninitialized apfcutil -c RAP: Uninitialized. Initializing......... apfcutil: sector MESH Prov: Cache uninitialized ATHR_GMAC: RX TASKLET - Pkts per Intr:16 ATHR_GMAC: Mac address for unit 0:80737bc0 ATHR_GMAC: 94:b4:0f:c3:cf:f0 ATHR_GMAC: Mac capability flags : 42201 ATHR_GMAC: RX TASKLET - Pkts per Intr:16 ATHR_GMAC: Mac address for unit 1:80737bc0 ATHR_GMAC: 94:b4:0f:c3:cf:f1 mac:1 Registering S27.... ATHR_GMAC: Mac capability flags : 42A00 WASP ----> S17 PHY * athrs17_reg_init:done Phy setup Complete drvlog_mod: module license 'Proprietary' taints kernel. AP xml model 76, num_radios 2 (jiffies 7857) init_asap_mod: installation:0 radio 0: band 1 ant 0 max_ssid 16 radio 1: band 0 ant 0 max_ssid 16 Starting watchdog process... Getting an IP address... WASP ----> S17 PHY * athrs17_reg_init:done Setting PHY... Phy setup Complete [az] 802.3az init done.. ADDRCONF(NETDEV_UP): bond0: link is not ready Enet:0 port0 up athr_gmac_poll_link: unit 0 link change to up ATH_MAC_TIMER: enet unit:0 is up... Mii 1000Mbps full duplex ATH_MAC_TIMER: Done cfg2 0x7235 ifctl 0x0 miictrl ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready 192.168.1.112 255.255.255.0 192.168.1.1 Running ADP...cat: /tmp/master: No such file or directory Done. Master is killall: nanny: no process killed killall: sapd: no process killed Sending SIGKILL to all processes. Please stand by while rebooting the system. Restarting system. . *************************** then the AP restart the boot again ******************* ************************************************************************************