[ 0.000000] ArubaOS Version 6.4.2.6-4.1.1.11 (build 52666 / label #52666) [ 0.000000] Built by p4build@chios on 2015-11-22 at 16:41:06 PST (gcc version 4.5.1) [ 0.000000] [ 0.000000] P1010 RDB board from Freescale Semiconductor [ 0.000000] Memory: 246320k/262144k available (12484k kernel code, 15824k reserved, 500k data, 456k bss, 9044k init) [ 0.001478] Brought up 1 CPUs [ 0.077614] PCI: Probing PCI hardware [ 0.120664] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 0.183571] pci 0001:02:00.0: PCI bridge to [bus 03-ff] [ 0.245793] pci 0000:00:00.0: not setting up bridge for bus 0000:01 [ 0.320364] pci 0001:02:00.0: not setting up bridge for bus 0001:03 [ 6.525187] fsl-ifc ffe1e000.ifc: Freescale Integrated Flash Controller [ 6.630288] Kprobe smoke test started [ 6.680269] Kprobe smoke test passed successfully [ 6.841810] ee000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank [ 6.916846] Amd/Fujitsu Extended Query Table at 0x0040 [ 6.978338] number of CFI chips: 1 [ 7.022784] fsl-gianfar ethernet.2: enabled errata workarounds, flags: 0x4 [ 7.105150] gfar_probe: Renaming interface to bond0 [ 7.163911] /proc/gfar_bond0_stats created [ 7.226164] Enabling watchdog on CPU 0 [ 7.272766] caam ffe30000.crypto: device ID = 0x0a14010000000000 [ 7.344700] caam ffe30000.crypto: job queues = 4 [ 7.400017] caam ffe30000.crypto: authenc-hmac-sha1-cbc-aes-caam [ 7.472010] caam ffe30000.crypto: authenc-hmac-sha256-cbc-aes-caam [ 7.546062] caam ffe30000.crypto: authenc-hmac-sha1-cbc-des3_ede-caam [ 7.623243] caam ffe30000.crypto: authenc-hmac-sha256-cbc-des3_ede-caam [ 7.702503] caam ffe30000.crypto: authenc-hmac-sha1-cbc-des-caam [ 7.774472] caam ffe30000.crypto: authenc-hmac-sha256-cbc-des-caam [ 7.853374] caam ffe30000.crypto: ccm-aes-caam [ 7.912056] [ 7.912062] Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT [ 8.003801] Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT [ 8.092208] Starting Kernel DES KAT ...Completed Kernel DES KAT [ 8.164158] Starting Kernel AES KAT ...Completed Kernel AES KAT [ 8.207952] [ 8.253821] Starting Kernel HMAC SHA1 FIPS KAT ...Completed Kernel HMAC SHA1 FIPS KAT [ 8.349107] Starting Kernel HMAC SHA256 FIPS KAT ...Completed Kernel HMAC SHA256 FIPS KAT [ 8.452381] Starting Kernel HMAC SHA384 FIPS KAT ...Completed Kernel HMAC SHA384 FIPS KAT [ 8.556620] Starting Kernel HMAC SHA512 FIPS KAT ...Completed Kernel HMAC SHA512 FIPS KAT [ 8.660831] Starting Kernel AES-CBC FIPS KAT ...Completed Kernel AES-CBC FIPS KAT [ 8.758290] Starting Kernel AES-CCM FIPS KAT ...Completed Kernel AES-CCM FIPS KAT [ 8.858591] Starting Kernel 3DES-CBC FIPS KAT ...Completed Kernel 3DES-CBC FIPS KAT Domain Name: instant.arubanetworks.com No panic info available Backup ENV. Cfg len is 3.2k Loading configuration file of length 3.2k... wifi uplink not present... extended ssid config detected... Terminal access enabled... Valid SSID detected... [ 16.131378] ADDRCONF(NETDEV_UP): bond0: link is not ready Ethernet uplink not active yet Ethernet uplink not active yet Ethernet uplink not active yet Ethernet uplink not active yet Ethernet uplink not active yet Ethernet uplink not active yet Ethernet uplink not active yet Ethernet uplink not active yet Ethernet uplink not active yet Ethernet uplink not active yet Mesh is DISABLED on this device. [ 46.609206] AP xml model 84, num_radios 2 (jiffies 23131) [ 46.673854] init_asap_mod: installation:0 [ 46.721799] radio 0: band 1 ant 0 max_ssid 16 [ 46.773901] radio 1: band 0 ant 0 max_ssid 16 [ 46.826018] election init: rand=17 HZ=500 [ 46.873963] IAP client match init notify asap_mod 3g no present... Starting watchdog process... Got all network params from APboot env. Skipping DHCP Static IP detected. Checking if LACP needs to be configured cat: /sys/class/net/bond0/bonding/mode: No such file or directory LACP mode set to 10.10.10.10 255.255.255.0 10.10.10.1 Compressing all files in the /etc/httpd directory... Done. Starting Webserver bind: Transport endpoint is not connected bind: Transport endpoint is not connected bind: Transport endpoint is not connected Launching NTP Client on pool.ntp.org [ 106.163927] wifi0: AP type AP-215, radio 0, max_bssids 16 [ 106.303045] Enabling USB power [ 106.351854] wifi1: AP type AP-215, radio 1, max_bssids 16 AP rebooted Thu Jan 1 10:07:29 UTC 1970; Current uplink down, no useable uplink shutting down watchdog process (nanny will restart it)... Completed SW FIPS KAT test <<<<< Welcome to the Access Point >>>>> User: [ 127.598420] process `snmpd_sap' is using obsolete setsockopt SO_BSDCOMPAT [ 139.654047] Picked up default IP a9fe3765, rand 3765! [ 145.725803] Default IP is ready! [ 146.069332] ip_time_handler: Got ip and packets on bond0 Started master election 1-0, rand 29 [ 175.193319] i am master now [ 175.226701] (00:02:54) !!! Init ---> Master [ 175.276756] asap_send_elected_master: sent successfully Sending SIGKILL to all processes. Please stand by while rebooting the system. [ 459.721972] Restarting system. APBoot 1.5.3.9 (build 43867) Built: 2014-05-21 at 19:31:10 Model: AP-21x CPU: P1010E, Version: 1.0, (0x80f90010) Core: E500, Version: 5.1, (0x80212151) Clock: CPU0: 800 MHz CCB: 400 MHz DDR: 400 MHz (800 MT/s data rate) (Asynchronous) LBC: unknown (LCRR[CLKDIV] = 0x00) L1: D-cache 32KB enabled I-cache 32KB enabled I2C: ready DRAM: Configuring DDR for 800 MT/s data rate DDR: 256 MB (DDR3, 32-bit, CL=6, ECC off) POST1: memory passed Flash: 32 MB L2: 256 KB enabled Power: 802.3at POE PCIe1: RC, link up, x1 dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3 00 00 14e4 4360 00002 03 80000004 00000000 00000000 00000000 PCIe2: RC, link up, x1 dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3 00 00 14e4 4360 00002 03 a0000004 00000000 00000000 00000000 Net: eth0 Radio: bcm43460#0, bcm43460#1 Hit to stop autoboot: 0 Booting OS partition 0 Checking image @ 0xee000000 Copying image from 0xee000000 Image is signed; verifying checksum... passed Signer Cert OK Policy Cert OK RSA signature verified. [ 0.000000] Flash variant: variant0 [ 0.000000] [ 0.000000] Aruba Networks [ 0.000000] ArubaOS Version 6.4.2.6-4.1.1.11 (build 52666 / label #52666) [ 0.000000] Built by p4build@chios on 2015-11-22 at 16:41:06 PST (gcc version 4.5.1) [ 0.000000] [ 0.000000] P1010 RDB board from Freescale Semiconductor [ 0.000000] Memory: 246320k/262144k available (12484k kernel code, 15824k reserved, 500k data, 456k bss, 9044k init) [ 0.001478] Brought up 1 CPUs [ 0.077606] PCI: Probing PCI hardware [ 0.120654] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 0.183561] pci 0001:02:00.0: PCI bridge to [bus 03-ff] [ 0.245782] pci 0000:00:00.0: not setting up bridge for bus 0000:01 [ 0.320354] pci 0001:02:00.0: not setting up bridge for bus 0001:03 [ 6.525200] fsl-ifc ffe1e000.ifc: Freescale Integrated Flash Controller [ 6.630348] Kprobe smoke test started [ 6.680330] Kprobe smoke test passed successfully [ 6.841631] ee000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank [ 6.916667] Amd/Fujitsu Extended Query Table at 0x0040 [ 6.978158] number of CFI chips: 1 [ 7.022612] fsl-gianfar ethernet.2: enabled errata workarounds, flags: 0x4 [ 7.104981] gfar_probe: Renaming interface to bond0 [ 7.163746] /proc/gfar_bond0_stats created [ 7.225987] Enabling watchdog on CPU 0 [ 7.272591] caam ffe30000.crypto: device ID = 0x0a14010000000000 [ 7.344527] caam ffe30000.crypto: job queues = 4 [ 7.399843] caam ffe30000.crypto: authenc-hmac-sha1-cbc-aes-caam [ 7.471835] caam ffe30000.crypto: authenc-hmac-sha256-cbc-aes-caam [ 7.545888] caam ffe30000.crypto: authenc-hmac-sha1-cbc-des3_ede-caam [ 7.623069] caam ffe30000.crypto: authenc-hmac-sha256-cbc-des3_ede-caam [ 7.702324] caam ffe30000.crypto: authenc-hmac-sha1-cbc-des-caam [ 7.774291] caam ffe30000.crypto: authenc-hmac-sha256-cbc-des-caam [ 7.853187] caam ffe30000.crypto: ccm-aes-caam [ 7.911884] [ 7.911891] Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT [ 8.003630] Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT [ 8.092046] Starting Kernel DES KAT ...Completed Kernel DES KAT [ 8.163993] Starting Kernel AES KAT ...Completed Kernel AES KAT [ 8.207789] [ 8.253656] Starting Kernel HMAC SHA1 FIPS KAT ...Completed Kernel HMAC SHA1 FIPS KAT [ 8.348941] Starting Kernel HMAC SHA256 FIPS KAT ...Completed Kernel HMAC SHA256 FIPS KAT [ 8.452200] Starting Kernel HMAC SHA384 FIPS KAT ...Completed Kernel HMAC SHA384 FIPS KAT [ 8.556435] Starting Kernel HMAC SHA512 FIPS KAT ...Completed Kernel HMAC SHA512 FIPS KAT [ 8.660654] Starting Kernel AES-CBC FIPS KAT ...Completed Kernel AES-CBC FIPS KAT [ 8.758112] Starting Kernel AES-CCM FIPS KAT ...Completed Kernel AES-CCM FIPS KAT [ 8.858414] Starting Kernel 3DES-CBC FIPS KAT ...Completed Kernel 3DES-CBC FIPS KAT Domain Name: instant.arubanetworks.com No panic info available Backup ENV. Cfg len is 3.2k Loading configuration file of length 3.2k... wifi uplink not present... extended ssid config detected... Terminal access enabled... Valid SSID detected... [ 16.150352] ADDRCONF(NETDEV_UP): bond0: link is not ready Ethernet uplink not active yet Ethernet uplink not active yet Ethernet uplink not active yet Ethernet uplink not active yet