Checking image @ 0xee000000 Copying image from 0xee000000 Image is signed; verifying checksum... passed Signer Cert OK Policy Cert OK RSA signature verified. [ 0.000000] Flash variant: default [ 0.000000] [ 0.000000] Aruba Networks [ 0.000000] ArubaOS Version 6.4.2.6-4.1.1.6 (build 50009 / label #50009) [ 0.000000] Built by p4build@tortuga on 2015-05-12 at 10:54:20 PDT (gcc version 4.5.1) [ 0.000000] [ 0.000000] Memory: 506148k/524288k available (12480k kernel code, 18140k reserved, 504k data, 456k bss, 9040k init) [ 0.002952] Processor 1 found. [ 0.156875] Brought up 2 CPUs [ 0.233383] PCI: Probing PCI hardware [ 0.276106] PCI: Resetting PCI bus [ 0.477125] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 0.539371] pci 0001:02:00.0: PCI bridge to [bus 03-ff] [ 0.601656] pci 0000:01:00.0: BAR 2: assigned [mem 0x80000000-0x801fffff 64bit] [ 0.688635] pci 0000:01:00.0: BAR 2: set to [mem 0x80000000-0x801fffff 64bit] (PCI address [0x80000000-0x801fffff] [ 0.812545] pci 0000:01:00.0: BAR 0: assigned [mem 0x80200000-0x80207fff 64bit] [ 0.900042] pci 0000:01:00.0: BAR 0: set to [mem 0x80200000-0x80207fff 64bit] (PCI address [0x80200000-0x80207fff] [ 1.023995] pci 0000:00:00.0: enabling device (0106 -> 0107) [ 1.091697] pci 0001:03:00.0: BAR 2: assigned [mem 0xa0000000-0xa01fffff 64bit] [ 1.179192] pci 0001:03:00.0: BAR 2: set to [mem 0xa0000000-0xa01fffff 64bit] (PCI address [0xa0000000-0xa01fffff] [ 1.303137] pci 0001:03:00.0: BAR 0: assigned [mem 0xa0200000-0xa0207fff 64bit] [ 1.390635] pci 0001:03:00.0: BAR 0: set to [mem 0xa0200000-0xa0207fff 64bit] (PCI address [0xa0200000-0xa0207fff] [ 1.514587] pci 0001:02:00.0: enabling device (0106 -> 0107) [ 7.717549] Kprobe smoke test started [ 7.791545] Kprobe smoke test passed successfully [ 7.963702] ee000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank [ 8.038734] Amd/Fujitsu Extended Query Table at 0x0040 [ 8.100262] number of CFI chips: 1 [ 8.144972] fsl-gianfar ethernet.2: enabled errata workarounds, flags: 0x4 [ 8.227762] /proc/gfar_eth0_stats created [ 8.278023] fsl-gianfar ethernet.3: enabled errata workarounds, flags: 0x4 [ 8.360794] /proc/gfar_eth1_stats created [ 8.424962] Enabling watchdog on CPU 1 [ 8.424971] Enabling watchdog on CPU 0 [ 8.521625] [ 8.521630] Starting Kernel SHA1 KAT ...Starting Kernel HMAC SHA1 FIPS KAT ...Completed Kernel HMAC SHA1 FIPS KAT [ 8.534663] Starting Kernel HMAC SHA256 FIPS KAT ...Completed Kernel HMAC SHA256 FIPS KAT [ 8.535665] Starting Kernel HMAC SHA384 FIPS KAT ...Completed Kernel HMAC SHA384 FIPS KAT [ 8.536096] Starting Kernel HMAC SHA512 FIPS KAT ...Completed Kernel HMAC SHA512 FIPS KAT [ 8.536526] Starting Kernel AES-CBC FIPS KAT ...Completed Kernel AES-CBC FIPS KAT [ 8.598707] Starting Kernel AES-CCM FIPS KAT ...Completed Kernel AES-CCM FIPS KAT [ 8.599184] Starting Kernel 3DES-CBC FIPS KAT ...Completed Kernel 3DES-CBC FIPS KAT [ 9.234240] Completed Kernel SHA1 KAT [ 9.279059] Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT [ 9.367259] Starting Kernel DES KAT ...Completed Kernel DES KAT [ 9.439216] Starting Kernel AES KAT ...Completed Kernel AES KAT [ 9.483014] Domain Name: instant.arubanetworks.com No panic info available Backup ENV. [ 14.733050] p1020_soc: P1020 Misc Utils Driver version 1 Ethernet port 1 mode: active-standby [ 14.993077] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.060580] ADDRCONF(NETDEV_UP): bond0: link is not ready [ 15.149326] bonding: bond0: enslaving eth0 as a backup interface with a down link. [ 15.256259] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 15.339189] bonding: bond0: enslaving eth1 as a backup interface with a down link. Cfg len is 2.5k Loading configuration file of length 2.5k... wifi uplink not present... extended ssid config detected... Terminal access enabled... factory default SSID detected... extended ssid activate due to no valid ssid ... do ethtool autoneg on for eth0 Starting up in standalone mode Disabling wpa_supplicant for this paltform [ 18.717395] AP xml model 66, num_radios 2 (jiffies 8708) [ 18.781023] init_asap_mod: installation:0 [ 18.828969] radio 0: band 1 ant 0 max_ssid 16 [ 18.881072] radio 1: band 0 ant 0 max_ssid 16 [ 18.933189] election init: rand=e HZ=500 [ 18.980084] IAP client match init [ 19.019755] ethernet_device_event: dev eth0 is up [ 19.076040] ethernet_device_event: dev eth1 is up notify asap_mod 3g no present... notify asap standalone ap... Starting watchdog process... [ 19.272394] bonding: bond0: Could not set eth0 as active slave; either eth0 is down or the link is down. Getting an IP address... Dec 31 16:00:18 udhcpc[2257]: udhcpc (v0.9.9-pre) started Dec 31 16:00:18 udhcpc[2257]: send_discover: pkt num 0, secs 0 Dec 31 16:00:18 udhcpc[2257]: Sending discover... Dec 31 16:00:20 udhcpc[2257]: send_discover: pkt num 1, secs 2 Dec 31 16:00:20 udhcpc[2257]: Sending discover... Dec 31 16:00:22 udhcpc[2257]: send_discover: pkt num 2, secs 4 Dec 31 16:00:22 udhcpc[2257]: Sending discover... Dec 31 16:00:24 udhcpc[2257]: No lease, forking to background. Dec 31 16:00:44 udhcpc[2398]: send_discover: pkt num 0, secs 26 Dec 31 16:00:44 udhcpc[2398]: Sending discover... Dec 31 16:00:46 udhcpc[2398]: send_discover: pkt num 1, secs 28 Dec 31 16:00:46 udhcpc[2398]: Sending discover... Dec 31 16:00:48 udhcpc[2398]: send_discover: pkt num 2, secs 30 Dec 31 16:00:48 udhcpc[2398]: Sending discover... Dec 31 16:01:10 udhcpc[2398]: send_discover: pkt num 0, secs 52 Dec 31 16:01:10 udhcpc[2398]: Sending discover... Dec 31 16:01:12 udhcpc[2398]: send_discover: pkt num 1, secs 54 Dec 31 16:01:12 udhcpc[2398]: Sending discover... Dec 31 16:01:14 udhcpc[2398]: send_discover: pkt num 2, secs 56 Dec 31 16:01:14 udhcpc[2398]: Sending discover... Dec 31 16:01:36 udhcpc[2398]: send_discover: pkt num 0, secs 78 Dec 31 16:01:36 udhcpc[2398]: Sending discover... Dec 31 16:01:38 udhcpc[2398]: send_discover: pkt num 1, secs 80 Dec 31 16:01:38 udhcpc[2398]: Sending discover... Dec 31 16:01:40 udhcpc[2398]: send_discover: pkt num 2, secs 82 Dec 31 16:01:40 udhcpc[2398]: Sending discover... [ 109.159533] Picked up default IP a9fe756f, rand 756f [ 115.171529] Default IP is ready Dec 31 16:02:02 udhcpc[2398]: send_discover: pkt num 0, secs 104 Dec 31 16:02:02 udhcpc[2398]: Sending discover... Dec 31 16:02:04 udhcpc[2398]: send_discover: pkt num 1, secs 106 Dec 31 16:02:04 udhcpc[2398]: Sending discover... Dec 31 16:02:06 udhcpc[2398]: send_discover: pkt num 2, secs 108 Dec 31 16:02:06 udhcpc[2398]: Sending discover... DHCP timed out. Installing default ip. Default IP comes up. [ 147.235546] ip_time_handler: Got ip and packets on bond0 Started master election 124-0, rand 22 DHCP timed out. DHCP got ip address. [ 147.680918] bonding: bond0: releasing backup interface eth1 [ 147.771503] ethernet_device_event: dev eth1 is down [ 147.836987] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 147.900598] ethernet_device_event: dev eth1 is up 169.254.117.111 255.255.0.0 Compressing all files in the /etc/httpd directory... Dec 31 16:02:28 udhcpc[2398]: send_discover: pkt num 0, secs 130 Dec 31 16:02:28 udhcpc[2398]: Sending discover... Done. Starting Webserver bind: Transport endpoint is not connected bind: Transport endpoint is not connected bind: Transport endpoint is not connected Launching NTP Client on pool.ntp.org Jan 1 00:02:30 [ 152.194843] wl 0000:01:00.0: enabling device (0000 -> 0002) udhcpc[2398]: send_discover: pkt[ 152.304495] wifi0: AP type AP-225, radio 0, max_bssids 16 num 1, secs 132 Jan 1 00:02:30 udhcpc[2398]: Sending discover... [ 152.655100] Enabling eth1 due to power change [power profile 1] [ 152.728150] wl 0001:03:00.0: enabling device (0000 -> 0002) [ 152.850863] wifi1: AP type AP-225, radio 1, max_bssids 16 Clearing P1020 PCIe Error Status shutting down watchdog process (nanny will restart it)... Jan 1 00:02:32 udhcpc[2398]: send_discover: pkt num 2, secs 134 Jan 1 00:02:32 udhcpc[2398]: Sending discover... Completed SW FIPS KAT test <<<<< Welcome to the Access Point >>>>> User: [ 177.669321] process `snmpd_sap' is using obsolete setsockopt SO_BSDCOMPAT [ 178.367034] i am master now [ 178.400429] (00:02:57) !!! Init ---> Master [ 178.450463] asap_send_elected_master: sent successfully