XXX-COR-AP3UPR# show log system Jul 12 05:07:40 KERNEL(XXX-COR-AP3UPR@10.XX.1.79): [ 13.683576] There is no gpio reset info Jul 12 05:07:40 KERNEL(XXX-COR-AP3UPR@10.XX.1.79): [ 54.705212] ip_time_handler: Got ip and packets on bond0 Started master election 349-0, rand 21 Jul 12 05:07:40 syslog: <341005> |AP XXX-COR-AP3UPR: | terminal access is enabled but sshd is not running, starting Jul 12 05:07:40 KERNEL(XXX-COR-AP3UPR@10.XX.1.79): [ 69.373174] Starting Kernel HMAC SHA1 FIPS KAT ... Jul 12 05:07:40 KERNEL(XXX-COR-AP3UPR@10.XX.1.79): [ 69.415985] Completed Kernel HMAC SHA1 FIPS KAT Jul 12 05:07:42 cli[3116]: <341004> |AP XXX-COR-AP3UPR: | regulatory table. version 1.0_68979 Jul 12 05:07:42 cli[3116]: <341004> |AP XXX-COR-AP3UPR: | regulatory table. build Feb 1,2019 Jul 12 05:07:42 KERNEL(XXX-COR-AP3UPR@10.XX.1.79): [ 71.377189] Starting Kernel HMAC SHA256 FIPS KAT ... Jul 12 05:07:42 cli[3116]: <341004> |AP XXX-COR-AP3UPR: | regulatory table in image. version 1.0_68979 build Feb 1,2019 Jul 12 05:07:42 KERNEL(XXX-COR-AP3UPR@10.XX.1.79): [ 71.422085] Completed Kernel HMAC SHA256 FIPS KAT Jul 12 05:07:42 cli[3116]: <341317> |AP XXX-COR-AP3UPR: | Regulatory table file init at version 1.0_68979, build Feb 1,2019. Jul 12 05:07:42 cli[3116]: <341004> |AP XXX-COR-AP3UPR: | regulatory table from flash. version 1.0_70855. Jul 12 05:07:42 cli[3116]: <341004> |AP XXX-COR-AP3UPR: | The DRT in flash is newer. Jul 12 05:07:44 nanny[3049]: <303022> |AP XXX-COR-AP3UPR: | Reboot Reason: AP rebooted Fri Jul 12 06:05:58 CDT 2019; System cmd at uptime 0D 10H 5M 10S: UI cmd at uptime 0D 10H 5M 0S: reload all Jul 12 05:07:44 KERNEL(XXX-COR-AP3UPR@10.XX.1.79): [ 73.377184] Starting Kernel HMAC SHA384 FIPS KAT ... Jul 12 05:07:44 KERNEL(XXX-COR-AP3UPR@10.XX.1.79): [ 73.422083] Completed Kernel HMAC SHA384 FIPS KAT Jul 12 05:07:44 cli[3116]: <341004> |AP XXX-COR-AP3UPR: | regulatory table from flash. build time Jun 8,2019. Jul 12 05:07:46 KERNEL(XXX-COR-AP3UPR@10.XX.1.79): [ 75.393177] Starting Kernel HMAC SHA512 FIPS KAT ... Jul 12 05:07:46 KERNEL(XXX-COR-AP3UPR@10.XX.1.79): [ 75.438039] Completed Kernel HMAC SHA512 FIPS KAT Jul 12 05:07:54 nanny[3049]: <303074> |AP XXX-COR-AP3UPR@10.XX.1.79 nanny| Process /aruba/bin/radiusd [pid 3167] died: exited with 0x1 Jul 12 05:07:54 nanny[3049]: <303079> |AP XXX-COR-AP3UPR@10.XX.1.79 nanny| Restarted process /aruba/bin/radiusd, new pid 3288 Jul 12 05:07:56 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| is_same_territory_ap_exist, ap_cci = 0, return ret = 1 Jul 12 05:07:56 cli[3116]: <341207> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| AP support up to 14 SSID. Jul 12 05:07:56 cli[3116]: <341172> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Find enet0 name bond0. Jul 12 05:07:56 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| CLI to PAPI port 8359 communication code 1 Jul 12 05:07:57 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| cli_choose_eth_uplink:eth current uplink set to DHCP Jul 12 05:07:57 cli[3116]: <341169> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Add uplink Ethernet 0. Jul 12 05:07:57 cli[3116]: <341167> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Uplink bond0 type Ethernet, state INIT->LOAD. Jul 12 05:07:57 cli[3116]: <341169> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Add uplink Wifi-sta 6. Jul 12 05:07:57 cli[3116]: <341169> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Add uplink 3G/4G 7. Jul 12 05:07:57 cli[3116]: <341167> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Uplink type Dummy, state INIT->LOAD. Jul 12 05:07:57 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| recv non-3g setup_uplink finished from sapd Jul 12 05:07:57 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| receive sapd hello for process recovery Jul 12 05:07:57 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Received NTP alert trigger - status is success, retry - 0, DTLS state - 0 Jul 12 05:07:57 KERNEL(XXX-COR-AP3UPR@10.XX.1.79): [ 86.842957] (11:07:57) !!! Init ---> Master Jul 12 05:07:58 cli[3116]: <341174> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| No current uplink, pick the highest one - Ethernet bond0. Jul 12 05:07:58 cli[3116]: <341263> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| enable uplink bond0. Jul 12 05:07:58 cli[3116]: <341167> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Uplink bond0 type Ethernet, state LOAD->PROBE. Jul 12 05:07:58 cli[3116]: <341265> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| enable ethernet uplink bond0. Jul 12 05:07:58 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| the ethernet uplink inuse in first time, get ip address. Jul 12 05:07:58 cli[3116]: <341167> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Uplink bond0 type Ethernet, state PROBE->UP. Jul 12 05:07:58 cli[3116]: <341185> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Retrieving ip address from br0, ip 10.60.1.79, mask 255.255.0.0. Jul 12 05:07:58 cli[3116]: <341274> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Update election ip from br0, election ip 10.60.1.79/255.255.0.0. Jul 12 05:07:58 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| build_my_ip_address: update old election ip with new ip Jul 12 05:07:58 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| build_my_ip_address: old ip and new ip same; skipping Jul 12 05:07:58 cli[3116]: <341006> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Sending uplink_up msg to sapd Jul 12 05:07:58 cli[3116]: <341006> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| trap uplink info. Jul 12 05:07:58 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| last uplink is null, it's the first uplink, ignore this trap. Jul 12 05:07:58 cli[3116]: <341173> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Current uplink set to Ethernet, state UP. Jul 12 05:07:58 cli[3116]: <341135> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 0. Jul 12 05:07:58 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Swarm State Change from Startup to Found Jul 12 05:07:58 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| recv non-3g setup_uplink finished from sapd Jul 12 05:07:59 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Swarm State Change from Startup to Found Jul 12 05:08:02 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Swarm State Change from Found to Image-ok Jul 12 05:08:04 nanny[3049]: <303074> |AP XXX-COR-AP3UPR@10.XX.1.79 nanny| Process /aruba/bin/radiusd [pid 3288] died: exited with 0x1 Jul 12 05:08:04 nanny[3049]: <303079> |AP XXX-COR-AP3UPR@10.XX.1.79 nanny| Restarted process /aruba/bin/radiusd, new pid 3417 Jul 12 05:08:07 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Swarm State Change from Image-ok to DRT-ok. Jul 12 05:08:17 cli[3116]: <341194> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Loading configuration, func swarm_timer_handler, line 12636. Jul 12 05:08:17 cli[3116]: <341101> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| Execute command-configure terminal. Jul 12 05:08:18 cli[3116]: <341004> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| DRT: cli sends sapd regulatory table version US-1.0_70855 Jul 12 07:55:51 cli[3116]: <341108> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| sess_validate_sid_core: 202 invalid session client-10.60.100.200 sid-YkKWXB2bPEhTh1JjfDC1. Jul 12 08:00:31 cli[3116]: <341108> |AP XXX-COR-AP3UPR@10.XX.1.79 cli| sess_validate_sid_core: 202 invalid session client-10.60.100.202 sid-ZqYeDrquP6hogp81ryS6. Jul 12 10:19:22 stm[3146]: <304065> |AP XXX-COR-AP3UPR@10.XX.1.79 stm| PAPI_Send failed, send_papi_message_with_args, 1148: No such file or directory, dstport 5664