-- ArubaOS 6.4.2.8_50314
-- vim:set ts=4 sw=4:
WLSX-AUTH-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       TEXTUAL-CONVENTION FROM SNMPv2-TC 

       MODULE-IDENTITY,
       OBJECT-TYPE,
       snmpModules,
       Integer32,
	   Counter32,
	   IpAddress,
	   NOTIFICATION-TYPE
           FROM SNMPv2-SMI

       TDomain,
       DisplayString,
       PhysAddress,
       TAddress,
       TimeInterval,
       RowStatus,
       StorageType,
       TestAndIncr,
	   MacAddress,
	   TruthValue
           FROM SNMPv2-TC

       OBJECT-GROUP
           FROM SNMPv2-CONF
		wlsxEnterpriseMibModules
			FROM ARUBA-MIB

	   ArubaEnableValue,
	   ArubaAuthenticationMethods,
	   ArubaEncryptionMethods,
	   ArubaHashAlgorithms,
	   ArubaAuthServerType
	   		FROM ARUBA-TC;

   wlsxAuthMIB MODULE-IDENTITY 
       LAST-UPDATED "0611272030Z"
       ORGANIZATION "Aruba Wireless Networks"
       CONTACT-INFO
            "Postal:    1322 Crossman Avenue
                        Sunnyvale, CA 94089	
            E-mail:     dl-support@arubanetworks.com
            Phone:      +1 408 227 4500"
       DESCRIPTION
           "This MIB module defines MIB objects which provide
            information about the authentication servers known to an 
			Aruba controller."
       REVISION        "0611272030Z"
       DESCRIPTION
           "The initial revision."
       ::= { wlsxEnterpriseMibModules 8 }

   wlsxAuthenticationServerGroup     	OBJECT IDENTIFIER ::= { wlsxAuthMIB 1 }
   wlsxAuthenticationInfoGroup     	OBJECT IDENTIFIER ::= { wlsxAuthMIB 2 }
   wlsxAuthenticationGroup     	OBJECT IDENTIFIER ::= { wlsxAuthMIB 3 }

-- wlsxAuthenticationServerGroup contains information about the authentication
-- servers in the controller.

   wlsxAuthenticationServerTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxAuthenticationServerEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists all the authentication servers currently
			configured in the controller. Servers are identified by name.
		"
	
      ::= { wlsxAuthenticationServerGroup 1 } 

   wlsxAuthenticationServerEntry OBJECT-TYPE 
	  SYNTAX       WlsxAuthenticationServerEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Server entry"
	  INDEX { authServerName }
      ::= { wlsxAuthenticationServerTable 1 } 

   WlsxAuthenticationServerEntry ::=
     SEQUENCE {

		authServerName 					DisplayString,
		authServerType					ArubaAuthServerType,
		authServerAddress				DisplayString,
		authServerPort					Integer32,
		authServerRetryCount			Integer32,
		authServerTimeOutValue			Integer32,
		authServerState					ArubaEnableValue,
		authServerInservice				TruthValue,
		authServerUsageCount			Counter32,
		authServerSuccessfullAuths		Counter32,
		authServerFailedAuths			Counter32,
		authServerTimeouts				Counter32,
		authServerAvgResponseTime		Integer32,
		authServerOutStandingRequests	Integer32,
		authServerUptime				Integer32

     }

    authServerName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			The name of the authentication server.
            "
        ::= { wlsxAuthenticationServerEntry 1 }

    authServerType OBJECT-TYPE
         SYNTAX       ArubaAuthServerType
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The type of the authentication server.
            "
        ::= { wlsxAuthenticationServerEntry 2 }

    authServerAddress OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..48))
         MAX-ACCESS   read-create
         STATUS       current
         DESCRIPTION
            "
			The IP address of the authentication server.
            "
        ::= { wlsxAuthenticationServerEntry 3 }

    authServerPort OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-create
         STATUS       current
         DESCRIPTION
            "
			The transport layer port of the authentication server.
            "
        ::= { wlsxAuthenticationServerEntry 4 }

    authServerRetryCount OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-create
         STATUS       current
         DESCRIPTION
            "
			The configured retry count.
            "
        ::= { wlsxAuthenticationServerEntry 5 }

    authServerTimeOutValue OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-create
         STATUS       current
         DESCRIPTION
            "
			The configured timeout value.
            "
        ::= { wlsxAuthenticationServerEntry 6 }

    authServerState OBJECT-TYPE
         SYNTAX       ArubaEnableValue
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The state of the authentication server.
            "
        ::= { wlsxAuthenticationServerEntry 7 }

    authServerInservice OBJECT-TYPE
         SYNTAX       TruthValue
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			An indication of whether or not the authentication server is
			 in service.
            "
        ::= { wlsxAuthenticationServerEntry 8 }

    authServerUsageCount OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of times this server was queried.
            "
        ::= { wlsxAuthenticationServerEntry 9 }

    authServerSuccessfullAuths OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of times this server responded with success.
            "
        ::= { wlsxAuthenticationServerEntry 10 }

    authServerFailedAuths OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of times this server responded with failure.
            "
        ::= { wlsxAuthenticationServerEntry 11 }

    authServerTimeouts OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of times this communication with this server timed out.
            "
        ::= { wlsxAuthenticationServerEntry 12 }

    authServerAvgResponseTime OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The average response time of the server in milliseconds.
            "
        ::= { wlsxAuthenticationServerEntry 13 }

    authServerOutStandingRequests OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of requests currently outstanding to this server.
            "
        ::= { wlsxAuthenticationServerEntry 14 }

    authServerUptime OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The time since the server went into service with the controller.
            "
        ::= { wlsxAuthenticationServerEntry 15 }

   wlsxPortalServerTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxPortalServerEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This table lists configured captive portal servers.
		"
	
      ::= { wlsxAuthenticationServerGroup 2 } 

   wlsxPortalServerEntry OBJECT-TYPE 
	  SYNTAX       WlsxPortalServerEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Portal Server Entry"
	  INDEX { portalServerIndex }
      ::= { wlsxPortalServerTable 1 } 

   WlsxPortalServerEntry ::=
     SEQUENCE {
		portalServerIndex 				DisplayString,
		portalServerHost 				DisplayString,
		portalServerPort 				Integer32,
		portalServerPage 				DisplayString,
		portalServerProtocol			DisplayString
     }

    portalServerIndex OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..256))
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
            "
        ::= { wlsxPortalServerEntry 1 }

    portalServerHost OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..256))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The IP address of the portal server.
            "
        ::= { wlsxPortalServerEntry 2 }

    portalServerPort OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The transport layer port of the portal server.
            "
        ::= { wlsxPortalServerEntry 3 }

    portalServerPage OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..256))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The portal server URL
            "
        ::= { wlsxPortalServerEntry 4 }

    portalServerProtocol OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The portal server protocol (e.g. HTTP or HTTPS)
            "
        ::= { wlsxPortalServerEntry 5 }

   -- LDAP Server Specific State

   wlsxLdapServerStateTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxLdapServerStateEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
		"
      ::= { wlsxAuthenticationServerGroup 5 } 

   wlsxLdapServerStateEntry OBJECT-TYPE 
	  SYNTAX       WlsxLdapServerStateEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "LDAP Server Entry"
	  INDEX { authServerName }
      ::= { wlsxLdapServerStateTable 1 } 

   WlsxLdapServerStateEntry ::=
     SEQUENCE {
	 	ldapInitDone				TruthValue,
		ldapAdminBound				INTEGER,
		ldapReBindCount				Counter32

     }

    ldapInitDone OBJECT-TYPE
         SYNTAX       TruthValue
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates whether the controller is initialized with the server.
            "
        ::= { wlsxLdapServerStateEntry 1 }

    ldapAdminBound OBJECT-TYPE
         SYNTAX       INTEGER{
		 				no(1),
						yes(2),
						inProgress(3)
		 			  }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates whether the controller is bound to the server.
            "
        ::= { wlsxLdapServerStateEntry 2 }

    ldapReBindCount OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of times that the controller re-bound with the server.
            "
        ::= { wlsxLdapServerStateEntry 3 }

END