(ArubaController) #show rf dot11g-radio-profile "radio-2.4ghz--dense-soft" 802.11g radio profile "radio-2.4ghz--dense-soft" --------------------------------------------------------- Parameter Value --------- ----- Radio enable Enabled Mode ap-mode High throughput enable (radio) Enabled Very high throughput rates enable (256-QAM) Disabled Channel N/A Transmit EIRP 15.0 dBm Non-Wi-Fi Interference Immunity 2 Enable CSA Disabled CSA Count 4 Spectrum Monitoring Disabled Smart Antenna Disabled Spectrum Monitoring Profile default-g Advertise 802.11d and 802.11h Capabilities Disabled Spectrum Load Balancing Disabled Spectrum Load Balancing Mode channel Spectrum Load Balancing Update Interval (sec) 30 seconds Spectrum Load Balancing Threshold (%) 20 percent Spectrum Load Balancing Domain N/A Beacon Period 100 msec Beacon Regulate Disabled Advertized regulatory max EIRP 0 ARM/WIDS Override OFF Reduce Cell Size (Rx Sensitivity) 0 dB Energy Detect Threshold Offset 0 dB Management Frame Throttle interval 1 sec Management Frame Throttle Limit 20 Maximum Distance 0 meters RX Sensitivity Threshold 0 dB RX Sensitivity Tuning Based Channel Reuse disable Protection for 802.11b Clients Enabled Adaptive Radio Management (ARM) Profile arm-2.4ghz--dense-soft High-throughput Radio Profile ht-radio-2.4ghz--dense-soft AM Scanning Profile default (ArubaController) #show rf ht-radio-profile "ht-radio-2.4ghz--dense-soft" High-throughput radio profile "ht-radio-2.4ghz--dense-soft" -------------------------------------------------------------------- Parameter Value --------- ----- 40 MHz intolerance Disabled Honor 40 MHz intolerance Enabled CSD override Disabled VHT Bandwidth Signaling Disabled VHT - Transmit Beamforming Sounding Interval 0 msec (ArubaController) #show rf arm-profile "arm-2.4ghz--dense-soft" Adaptive Radio Management (ARM) profile "arm-2.4ghz--dense-soft" ------------------------------------------------------------------------- Parameter Value --------- ----- Assignment single-band Allowed bands for 40MHz channels a-only 80MHz support Enabled 160MHz-support None Client Aware Enabled Max Tx EIRP 12 dBm Min Tx EIRP 6 dBm Rogue AP Aware Disabled Scan Interval 10 sec Aggressive scanning true Active Scan Disabled ARM Over the Air Updates Enabled Scanning Enabled Multi Band Scan Enabled VoIP Aware Scan Enabled Power Save Aware Scan Disabled Video Aware Scan Enabled Ideal Coverage Index 2 Acceptable Coverage Index 2 Free Channel Index 40 Interfering AP Weight 25 % Backoff Time 240 sec Error Rate Threshold 90 % Error Rate Wait Time 600 sec Channel Quality Aware Arm Disabled Channel Quality Threshold 70 % Channel Quality Wait Time 120 sec Minimum Scan Time 8 Load aware Scan Threshold 1250000 Bps Mode Aware Arm Enabled Scan Mode all-reg-domain Client Match Enabled Client Match Report Interval (sec) 30 Allows Client Match to Automatically Clear Unsteerable Clients after Ageout Enabled Client Match Unsteerable Client Ageout Interval 2 Days 0 Hours Client Match Band Steering G Max Signal (-dBm) 10 Client Match Band Steering A Min Signal (-dBm) 70 Client Match Sticky Client Check Interval (sec) 3 Client Match Sticky Client SNR (dB) 18 Client Match SNR Delta Bound(dB) 10 Client Match Sticky Min Signal 70 Client Match Steering Timeout (sec) 3 Client Match Load Balancing Threshold (%) 20 Client Match IOS Steering Backoff Interval (sec) 300 Client Match VBR Stale Entry Age (sec) 120 Client Match Max Steering Failures 2 Client Match Load Balancing Client Threshold 30 Client Match Load Balancing SNR Threshold (dB) 25 Client Match Load Balancing Signal Delta Bound (dB) 5 Client Match 802.11v BSS Transition Management Enabled Dynamic Bandwidth Switch Disabled Dynamic Bandwidth Switch Wait Time (sec) 30 Dynamic Bandwidth Switch Triggering Indicator CCA ibss Threshold (%) 10 Dynamic Bandwidth Switch Triggering Indicator Beacon Failed Threshold 30 Dynamic Bandwidth Switch Triggering Indicator CCA intf Threshold (%) 30 Dynamic Bandwidth Switch Clear Time (min) 30 Client Match MU Client threshold 15 Client Match MU SNR threshold (dB) 30 (ArubaController) #show ap arm history ap-name weis-108-kitchen Interface :wifi0 Interface :wifi1 ARM History ----------- Time of Change Old Channel New Channel Old Power New Power Reason Result -------------- ----------- ----------- --------- --------- ------ ------ 2017-09-13 08:23:20 1 1 12 6 P- Configured 2017-09-13 07:01:01 0 1 0 12 ON Configured 2017-09-13 07:00:57 11 0 6 0 OFF Not accepted 2017-09-13 06:30:31 11 11 12 6 P- Configured 2017-09-13 05:22:52 1 11 12 12 I Configured 2017-09-13 05:17:51 0 1 0 12 ON Configured 2017-09-13 05:17:47 11 0 6 0 OFF Not accepted 2017-09-13 05:07:20 11 11 12 6 P- Configured 2017-09-13 03:54:40 11 11 9 12 P+ Configured 2017-09-13 03:48:09 11 11 12 9 P- Configured 2017-09-13 03:47:47 1 11 12 12 I Configured 2017-09-13 03:24:27 0 1 0 12 ON Configured 2017-09-13 03:24:23 11 0 6 0 OFF Not accepted 2017-09-13 03:20:44 1 11 6 6 I Configured 2017-09-13 03:00:00 1 1 12 6 P- Configured 2017-09-13 02:54:57 0 1 0 12 ON Configured 2017-09-13 02:54:53 11 0 6 0 OFF Not accepted 2017-09-13 02:50:51 1 11 6 6 I Configured 2017-09-13 02:50:41 1 1 12 6 P- Configured 2017-09-13 02:30:54 0 1 0 12 ON Configured 2017-09-13 02:30:50 11 0 6 0 OFF Not accepted 2017-09-13 01:44:04 11 11 12 6 P- Configured 2017-09-13 01:05:03 11 11 9 12 P+ Configured 2017-09-13 00:58:17 11 11 12 9 P- Configured 2017-09-13 00:49:03 11 11 9 12 P+ Configured 2017-09-13 00:15:33 11 11 12 9 P- Configured 2017-09-13 00:07:58 11 11 9 12 P+ Configured 2017-09-12 23:25:41 11 11 6 9 P+ Configured 2017-09-12 20:58:57 11 11 9 6 P- Configured 2017-09-12 20:39:45 11 11 12 9 P- Configured 2017-09-12 20:34:01 11 11 9 12 P+ Configured 2017-09-12 20:08:29 11 11 12 9 P- Configured I: Interference, R: Radar detection, N: Noise exceeded, Q: Bad Channel Quality E: Error threshold exceeded, INV: Invalid Channel, G: Rogue AP Containment, M: Empty Channel, P+: Increase Power, P-: Decrease Power, 40INT: 40MHZ intol detected on 2.4G, NO40INT: 40MHz intol cleared on 2.4G, OFF: Turn off Radio, ON: Turn on Radio, D: Dynamic Bandwidth Switch, I*: CCA Interference