From which version of ArubaOS can AP-124 and AP-125 be configured as mesh nodes (mesh portal and mesh point)?

By AnandKumar Sukumar posted Jul 01, 2014 04:24 PM


Product and Software: This article applies to AP-124/AP-125 and ArubaOS 3.4.x and later.


From ArubaOS 3.4.x and later, AP-124/AP-125 can be configured as mesh nodes.


Prior to ArubaOS 3.4, if the AP12x APs are provisioned as mesh nodes, they can (not necessarily though) generate errors log like the event shown here. The AP-12x may keep rebooting at 3 minute intervals.


Jul 21 18:48:51 <meshd 399803> <ERRS> |AP 00:1a:1e:c0:fa:9c@ meshd| An internal system error has occurred at file meshd_cfg.c function meshd_binary_wif_sysctl line 1119 error Error opening </proc/sys/dev/wifi0/mesh_cmn_struct> : No such file or directory.


Jul 21 18:49:01 <nanny 303073> <ERRS> |AP 00:1a:1e:c0:fa:9c@ nanny| Process /aruba/bin/meshd [pid 234] died: got signal SIGSEGV