Requirement:
This article discusses how to query the SNMP OIDs for the “Out Of Band Management Port” using the walkMIB CLI command.
Solution:
In the following example, the out of band management port configuration and statistics are displayed.
Configuration:
Aruba-2930M-48G# walkmib ifDescr | include Port
ifDescr.4883 = Out Of Band Management Port
Aruba-2930M-48G# walkmib 1.3.6.1.2.1 | include 4883
ifIndex.4883 = 4883
ifDescr.4883 = Out Of Band Management Port
ifType.4883 = 6
ifMtu.4883 = 1500
ifSpeed.4883 = 100,000,000
ifPhysAddress.4883 = f4 03 43 d8 2a 81
ifAdminStatus.4883 = 1
ifOperStatus.4883 = 1
ifLastChange.4883 = 18 secs
ifInOctets.4883 = 520,500
ifInUcastPkts.4883 = 110
ifInNUcastPkts.4883 = 80
ifInDiscards.4883 = 0
ifInErrors.4883 = 0
ifInUnknownProtos.4883 = 0
ifOutOctets.4883 = 8148
ifOutUcastPkts.4883 = 108
ifOutNUcastPkts.4883 = 0
ifOutDiscards.4883 = 0
ifOutErrors.4883 = 0
ifOutQLen.4883 = 0
ifSpecific.4883 = zeroDotZero
ipAdEntIfIndex.10.181.243.109 = 4883
ipv4InterfaceReasmMaxSize.4883 = 65,535
ipv4InterfaceEnableStatus.4883 = 1
ipv4InterfaceRetransmitTime.4883 = 100
ipv6InterfaceReasmMaxSize.4883 = 1500
ipv6InterfaceIdentifier.4883 = f6 03 43 ff fe d8 2a 81
ipv6InterfaceEnableStatus.4883 = 2
ipv6InterfaceReachableTime.4883 = 100
ipv6InterfaceRetransmitTime.4883 = 100
ipv6InterfaceForwarding.4883 = 0
ipAddressIfIndex.1.4.10.181.243.109 = 4883
ipAddressPrefix.1.4.10.181.243.109 =
ipAddressPrefixOrigin.4883.1.4.10.181.243.109.24
Verification
Aruba-2930M-48G# show oobm ip
IPv4 Status : Enabled
IPv4 Default Gateway : 10.181.243.254
| Address Interface
Member | IP Config IP Address/Prefix Length Status Status
------ + --------- ------------------------- -------- ---------
Global | dhcp 10.181.243.109/24 Up