This article applies to Aruba Mobility Controllers running ArubaOS version 6.3.0.0.
The outputs of the following show commands are enhanced to support IPv6 L3 mobility:
- show ip mobile host
- show ip mobile trace
- show ip mobile remote
- show ip mobile binding
- show ip mobile visitor
- show ip mobile trail
- show ip mobile packet-trace
- show ip mobile traffic
- show ip mobile global
- show ip mobile hat
- show ip mobile domain
Syntax
Parameter
|
Description
|
host
|
Display a list of Mobile IP hosts
|
trace
|
Show if the Mobile IP feature will poll remote controllers for mobility
status of station
|
remote
|
This is a debug command which can be used to identify the controller
associated with the specified client IP address or MAC address. The output
of this command shows the home agent (HA) and foreign agent (FA)
for a mobile client, as well as the client's roaming statu
|
binding
|
Display a list of Home Agent Bindings
|
visitor
|
Display a list of mobile nodes visiting a foreign agent
|
trail
|
Show the mobile IP roaming trail by entering a host’s IP(IPv4 or IPv6)or
MAC address
|
packet-trace
|
The output of this command shows when packets of different types were
sent between a source IP or MAC address and a destination IP or MAC
address
|
traffic
|
Display mobile IP protocol statistics for:
- Proxy DHCP
- Proxy Mobile IP
- Home Agent Registrations
- Foreign Agent Registrations
- Registration Revocations
|
global
|
View the current Mobility Agents global configuration
|
hat
|
Display the Active Home Agent Table
|
domain
|
Display subnet, VLAN and home agent information for all mobility
domains, or specify a mobility domain name to view data for that
domain only
|