Question: How to identify which port is Gig and which is 10Gig on 7xxx series controller?
On the 7xxx controllers ports you have 6 ports in which 0 and 1 are marked as GIG dual media (fiber or Ethernet) port not intended for 10GIG. However the ports which are marked as 0/0/2,0/0/3,0/0/4,0/0/5 are capable of 10GbE (10GBase-X (SFP+) Ports which are dual speed can operate GIG or 10GIG.Below is the command output of "show port status" but looking at this output we can't identify which is GIG or 10 GIG ports.
To Identify from CLI below is the command which shows whether it's GIG or 10GIG port.
To Identify from WebUI below is the screen-shot which shows whether it's GIG or 10GIG port.Monitoring > Ports > Select the port and click profile
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.