IAP InstantOS software comes with the support for IAP hardware thus enabling these APs to come-up and broadcast the SSID. WLAN administrators need to look for the minimum supported version before downgrading an IAP in the production setup. The below table shows the IAP models and the minimum supported version:
in the Airwave Plateform we ve got this message for IAP
Could not find suitable firmware image:188.8.131.52-184.108.40.206_56428(Vela) for ArubaInstant
Usualy I've got the same message with Taurus, lupus, release software witch is very useful to find the IAP but In my case i ve got "Vela" I don't know the software to download ??
Can you help me
I have been looking for an updated version of this. We have a number of IAP-92/93 APS used for Barcode Scanners, we want to add some more AP's (IAP-207) but I am not sure about the firmware compatability between them.
I've found this from the following link: Documentation
This might help others who are seeking image calss names
The following examples describe the image file format for different IAP models:
would you you be able to post the full table with IAP Firmware Image Classes please. We have IAP103 and IAP205s but the table above doesn't show the class name.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.