Q: How many concurrent SSH sessions are supported and how to Kill a particular SSH session?
A: Aruba HPE Switch allows 5 concurrent SSH sessions. Executing "show ip ssh" will show the list of active SSH session and using Kill command, user can kill any SSH session as needed.
- Below example shows 5 active SSH sessions,
Sunill-3810M(config)# show ip ssh
SSH Enabled : Yes Secure Copy Enabled : No
TCP Port Number : 22 Timeout (sec) : 120
Rekey Enabled : No Rekey Time (min) : 60
Rekey Volume (KB) : 1048576
Host Key Type : RSA Host Key/Curve Size : 2048
Ciphers : aes256-ctr,aes256-cbc,rijndael-cbc@lysator.liu.se,aes192-ctr,
aes192-cbc,aes128-ctr,aes128-cbc,3des-cbc
MACs : hmac-sha1-96,hmac-md5,hmac-sha1,hmac-md5-96
Ses Type | Source IP Port
--- -------- + ---------------------------------------------- -----
1 console |
2 ssh | 15.110.204.11 63776
3 ssh | 15.110.204.11 58187
4 ssh | 15.110.204.11 58194
5 ssh | 15.110.204.11 58201
6 ssh | 15.110.204.11 58209
7 inactive |
- To kill any one or more, executing Kill <ssh session ID> will kill that particular session.
- In the below example, session 6 was killed.
Sunill-3810M# kill 6
Sunill-3810M#
Sunill-3810M# show ip ssh
SSH Enabled : Yes Secure Copy Enabled : No
TCP Port Number : 22 Timeout (sec) : 120
Rekey Enabled : No Rekey Time (min) : 60
Rekey Volume (KB) : 1048576
Host Key Type : RSA Host Key/Curve Size : 2048
Ciphers : aes256-ctr,aes256-cbc,rijndael-cbc@lysator.liu.se,aes192-ctr,
aes192-cbc,aes128-ctr,aes128-cbc,3des-cbc
MACs : hmac-sha1-96,hmac-md5,hmac-sha1,hmac-md5-96
Ses Type | Source IP Port
--- -------- + ---------------------------------------------- -----
1 console |
2 ssh | 15.110.204.11 63776
3 ssh | 15.110.204.11 58187
4 ssh | 15.110.204.11 58194
5 ssh | 15.110.204.11 58201
6 inactive |
7 inactive |