I have a brand new deployment of 13 IAP-215's running 184.108.40.206-220.127.116.11_46028. Anytime I try to do a firmware update I get the message, "Another upgrade is in progress"
Even if I reboot all the AP's in the VC, I still get the error.
Can you clarify couple of things here,
1. Is it working setup ? ( in production)
2. Are these managed by Airwave or central ?
please clarify the above. also share the out put of "show log system" we can fix the issue.
I saw nothing the system logs whatsoever. However, I was able to resolve this by starting over.
I powered off all the radios but one. Factory reset it and started from scratch. From there everything worked fine after bringing the others up.
Thanks for the suggestions.
I've the same problem but i cannot shutdown all the other aps to solve this issue (i'm in a critical production environment).
We've have an hibrid 205, 215 models with virtual controller (without airwave or arubacentral). Now we've the firmware 18.104.22.168-22.214.171.124_57133 and we have tried to upgrade to 126.96.36.199-188.8.131.52_58595, the output is "upgrade cannot proceed because of another upgrade in progress"
With "show upgrade" command, the output is "upgrade in progress: no"
status is image-ok in every ap
I think that is a bug...
Any idea? thanks
Had the same issue after upgrading then trying to upgrade again. I had to clear my browser cached files and then it worked.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.