Hi All,
I picked up several 215's from eBay from a seller with a pretty good history, and not sure if I am doing something wrong, or the AP's are simply bad.
Can not get Instand SSID or other to broadcast.
I've set default IP/Mask/DG, and standalone_mode=1 and factory reset also, to no avail.
Telnet to static ip is rejected.
Any suggestion?
APBoot 1.5.3.9 (build 43867)
Built: 2014-05-21 at 19:31:10
Model: AP-21x
CPU: P1010E, Version: 1.0, (0x80f90010)
Core: E500, Version: 5.1, (0x80212151)
Clock:
CPU0: 800 MHz
CCB: 400 MHz
DDR: 400 MHz (800 MT/s data rate) (Asynchronous)
LBC: unknown (LCRR[CLKDIV] = 0x00)
L1: D-cache 32KB enabled
I-cache 32KB enabled
I2C: ready
DRAM: Configuring DDR for 800 MT/s data rate
DDR: 256 MB (DDR3, 32-bit, CL=6, ECC off)
POST1: memory passed
Flash: 32 MB
L2: 256 KB enabled
Power: 802.3af POE+
PCIe1: RC, link up, x1
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 14e4 4360 00002 03 80000004 00000000 00000000 00000000
PCIe2: RC, link up, x1
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 14e4 4360 00002 03 a0000004 00000000 00000000 00000000
Net: eth0
Radio: bcm43460#0, bcm43460#1
Hit <Enter> to stop autoboot: 2 1 0
apboot> printenv
bootdelay=2
baudrate=9600
autoload=n
boardname=Tomatin
servername=aruba-master
bootcmd=boot ap
autostart=yes
bootfile=e500.ari
ethaddr=ac:a3:1e:c8:5b:08
ethact=eth0
ipaddr=192.168.1.10
netmask=255.255.255.0
gatewayip=192.168.1.2
standalone_mode=1
stdin=serial
stdout=serial
stderr=serial
Environment size: 288/131068 bytes
apboot> boot
Checking image @ 0xee000000
Invalid image format version: 0xffffffff
Checking image @ 0xeee00000
Copying image from 0xeee00000
Image is signed; verifying checksum... passed
Signer Cert OK
Policy Cert OK
RSA signature verified.
[ 0.000000] Flash variant: variant0
[ 0.000000]
[ 0.000000] Aruba Networks
[ 0.000000] ArubaOS Version 6.4.1.0 (build 43882 / label #43882)
[ 0.000000] Built by p4build@cyprus on 2014-05-22 at 14:24:44 PDT (gcc version 4.5.1)
[ 0.000000]
[ 0.000000] P1010 RDB board from Freescale Semiconductor
[ 0.000000] Memory: 250004k/262144k available (8904k kernel code, 12140k reserved, 496k data, 358k bss, 5512k init)
[ 0.001488] Brought up 1 CPUs
[ 0.077622] PCI: Probing PCI hardware
[ 0.120669] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.183574] pci 0001:02:00.0: PCI bridge to [bus 03-ff]
[ 0.245798] pci 0000:00:00.0: not setting up bridge for bus 0000:01
[ 0.320368] pci 0001:02:00.0: not setting up bridge for bus 0001:03
[ 4.190395] fsl-ifc ffe1e000.ifc: Freescale Integrated Flash Controller
[ 4.295213] Kprobe smoke test started
[ 4.345137] Kprobe smoke test passed successfully
[ 4.505910] ee000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank
[ 4.580949] Amd/Fujitsu Extended Query Table at 0x0040
[ 4.642441] number of CFI chips: 1
[ 4.686862] fsl-gianfar ethernet.2: enabled errata workarounds, flags: 0x4
[ 4.769229] gfar_probe: Renaming interface to bond0
[ 4.827996] /proc/gfar_bond0_stats created
[ 4.890047] Enabling watchdog on CPU 0
[ 4.938411] Disabled fips elf aesccm selftest
[ 4.990587]
[ 4.990591] Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT
[ 5.082360] Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT
[ 5.172064] Starting Kernel DES KAT ...Completed Kernel DES KAT
[ 5.244017] Starting Kernel AES KAT ...Completed Kernel AES KAT
[ 5.287811]
[ 5.333676] Starting Kernel HMAC SHA1 FIPS KAT ...Completed Kernel HMAC SHA1 FIPS KAT
[ 5.428973] Starting Kernel HMAC SHA256 FIPS KAT ...Completed Kernel HMAC SHA256 FIPS KAT
[ 5.532162] Starting Kernel HMAC SHA384 FIPS KAT ...Completed Kernel HMAC SHA384 FIPS KAT
[ 5.636322] Starting Kernel HMAC SHA512 FIPS KAT ...Completed Kernel HMAC SHA512 FIPS KAT
[ 5.740461] Starting Kernel AES-CBC FIPS KAT ...Completed Kernel AES-CBC FIPS KAT
[ 5.837758] Starting Kernel 3DES-CBC FIPS KAT ...Completed Kernel 3DES-CBC FIPS KAT
Domain Name: arubanetworks.com
No panic info available
[ 7.011689] AP xml model 84, num_radios 2 (jiffies 3333)
[ 7.075306] init_asap_mod: installation:0
[ 7.123244] radio 0: band 1 ant 0 max_ssid 16
[ 7.175348] radio 1: band 0 ant 0 max_ssid 16
Starting watchdog process...
Got all network [ 9.461371] ADDRCONF(NETDEV_UP): bond0: link is not ready
params from APboot env. Skipping DHCP
Static IP detected. Checking if LACP needs to be configured
[ 15.465889] PHY: bond0 (mdio@ffe24000:00) - Link is Up - 100/Full
[ 15.538930] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
cat: /sys/class/net/bond0/bonding/mode: No such file or directory
LACP mode set to
192.168.1.10 255.255.255.0 192.168.1.2
Running ADP...
cat: /tmp/master: No such file or directory
Done. Master is
killall: nanny: no process killed
killall: sapd: no process killed
T
Sending SIGKILL to all processes.
Please stand by while rebooting the system.
[ 134.629948] Restarting system.
AP's boot, and ultimately stall at Running ADP...
cat: /tmp/master: No such file or directory
Done. Master is
killall: nanny: no process killed
killall: sapd: no process killed
------------------------------
fred koehler
------------------------------