Controllerless Networks

Hello All,

We have wireless aruba controllerless network consisting of IAP 207-indoor access points. So the virtual controller is one of the IAP 207. I want to add a IAP-303-indoor AP, my question is that can the 303 ap join the cluster of the 207 access points ? 

Thank you for your help

------------------------------
mohammad shamseddine
------------------------------

You will need to ensure that the IAP-207 is running a minimum of firmware InstantOS8.3 (as this is required for the IAP-303) before introducing these to the cluster.

------------------------------
Craig Syme
------------------------------

Original Message:
Sent: Jan 07, 2021 05:12 AM
From: mohammad shamseddine
Subject: AP 303-Indoor joining AP-207 IAP cluster

Hello All,

We have wireless aruba controllerless network consisting of IAP 207-indoor access points. So the virtual controller is one of the IAP 207. I want to add a IAP-303-indoor AP, my question is that can the 303 ap join the cluster of the 207 access points ? 

Thank you for your help

------------------------------
mohammad shamseddine
------------------------------

Thanks for your reply,

What is the recommended software level to upgrade the IAP-207 to before introducing the 303 access point ?

Best Regards,

------------------------------
mohammad shamseddine
------------------------------

Original Message:
Sent: Jan 07, 2021 05:17 AM
From: Craig Syme
Subject: AP 303-Indoor joining AP-207 IAP cluster

You will need to ensure that the IAP-207 is running a minimum of firmware InstantOS8.3 (as this is required for the IAP-303) before introducing these to the cluster.

------------------------------
Craig Syme

Original Message:
Sent: Jan 07, 2021 05:12 AM
From: mohammad shamseddine
Subject: AP 303-Indoor joining AP-207 IAP cluster

Hello All,

We have wireless aruba controllerless network consisting of IAP 207-indoor access points. So the virtual controller is one of the IAP 207. I want to add a IAP-303-indoor AP, my question is that can the 303 ap join the cluster of the 207 access points ? 

Thank you for your help

------------------------------
mohammad shamseddine
------------------------------

It depends on the current version of the IAP-207, ideally Instant6.5.1.0-4.3.1.0 or later. You can find the release notes for 8.3 and the support upgraded paths.

https://asp.arubanetworks.com/downloads/documents/RmlsZTo4YzQ1NjcxZS0wMzI3LTExZWItYjM1Yi03ZjUxYzNmMzczOTI%3D

------------------------------
Craig Syme
------------------------------

Original Message:
Sent: Jan 07, 2021 05:29 AM
From: mohammad shamseddine
Subject: AP 303-Indoor joining AP-207 IAP cluster

Thanks for your reply,

What is the recommended software level to upgrade the IAP-207 to before introducing the 303 access point ?

Best Regards,

------------------------------
mohammad shamseddine

Original Message:
Sent: Jan 07, 2021 05:17 AM
From: Craig Syme
Subject: AP 303-Indoor joining AP-207 IAP cluster

You will need to ensure that the IAP-207 is running a minimum of firmware InstantOS8.3 (as this is required for the IAP-303) before introducing these to the cluster.

------------------------------
Craig Syme

Original Message:
Sent: Jan 07, 2021 05:12 AM
From: mohammad shamseddine
Subject: AP 303-Indoor joining AP-207 IAP cluster

Hello All,

We have wireless aruba controllerless network consisting of IAP 207-indoor access points. So the virtual controller is one of the IAP 207. I want to add a IAP-303-indoor AP, my question is that can the 303 ap join the cluster of the 207 access points ? 

Thank you for your help

------------------------------
mohammad shamseddine
------------------------------