Germany should work with that DRT version for 6GHz. Not sure what you mean by Zone, as that is a feature to enable SSIDs only on specific APs. If you improperly configured that, it may be that the SSID is not enabled on the AP. Your regulatory-domain should be set to the country that you are in.
You could check the AP log, if there is a reason for the AP to not enable the 6GHz radio. Do you have enough power for the AP? In 802.3af (standard PoE, orange or red status led) the AP may not come up, or have the 6GHz radio disabled.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Jan 14, 2022 05:31 AM
From: Jörg Harth
Subject: AP-635, no 6 Ghz led
Hi there,
i have the accually Version of DRT installed, but no 6GHz WLAN :-(
Aktuelle Version der DRT (Downloadable Regulatory Table)1.0_82616
Zone and RF-Zone is DE (Germany)
AP Config > Modus for Modul 2 ist access
Network Config > access for 6GHz Band is on
Any idea?
------------------------------
Jörg Harth
Original Message:
Sent: Jan 07, 2022 04:43 AM
From: Jörg Harth
Subject: AP-635, no 6 Ghz led
Hi there,
i have the same issue, no 6GHz is flashing.
AP-635-RW (8.9.0.0_81161)
I have installed DRT 1.0_82293
I have tried the following Country Codes ( SE / GB / DE) but no 6GHz. I tried several channels (5, 21,37,53)
I tried (indoor / outdoor /standard)
Any idea what i´m doing wrong?
Best regards
Jörg
------------------------------
Jörg Harth
Original Message:
Sent: Jan 01, 2022 04:27 PM
From: Ari Kukkonen
Subject: AP-635, no 6 Ghz led
ok, I tested and after changing country from FI to SE and installed latest DRT (Check for New Version -button does not retrieve the latest and installing file directly fails on 635, had to install it from webserver), I have now 6 GHz light lit up.
------------------------------
Ari Kukkonen
Original Message:
Sent: Dec 29, 2021 08:24 PM
From: Onno Harms
Subject: AP-635, no 6 Ghz led
We can only add countries that have opened up the band. While the ruling is EU-wide, phasing it in does not happen at the same pace for all countries. When we released our most recent DRT file a couple of weeks ago, 6GHz was not yet open for business in Finland. I'm not sure what the timing is for that to change (should be soon).
------------------------------
Onno Harms
Original Message:
Sent: Dec 29, 2021 02:57 PM
From: Ari Kukkonen
Subject: AP-635, no 6 Ghz led
ok,
that is the problem.
DRT file is missing lot of EU-countries, it should include all of them. Adding Finland would fix my problem. When can you do that, please?
https://www.wi-fi.org/countries-enabling-wi-fi-6e
------------------------------
Ari Kukkonen
Original Message:
Sent: Dec 29, 2021 02:29 PM
From: Onno Harms
Subject: AP-635, no 6 Ghz led
By DRT version:
Build 80433: US
Build 80922: UK, Germany
Build 81497: South Korea
Build 82129: Peru
Build 82293: Brazil
Build 82446: Chile, Cyprus, Czech Republic, Denmark, Estonia, Greece, Iceland, Ireland, Malta, Netherlands, Norway, Slovak Republic, Sweden, Switzerland
------------------------------
Onno Harms
Original Message:
Sent: Dec 29, 2021 02:25 PM
From: Onno Harms
Subject: AP-635, no 6 Ghz led
What's the configured country of operation? Currently, the AP-635 will enable 6GHz only in a handful of countries. As more become available, this will be enabled through updates of the DRT file.
------------------------------
Onno Harms
Original Message:
Sent: Dec 27, 2021 04:26 PM
From: Ari Kukkonen
Subject: AP-635, no 6 Ghz led
Hi,
I just got AP-635. Installed it as part of my existing IAP-network. Problem is that 6 GHz led does not come on. 2.4 and 5 GHz leds have light. What setup is needed to get 6 Ghz radio working?
------------------------------
Ari Kukkonen
------------------------------