Controllerless Networks

last person joined: 34 minutes ago 

Aruba Instant Wi-Fi: Meet the controllerless Wi-Fi solution that's easy to set-up, is loaded with security and smarts, and won't break your budget.
Expand all | Collapse all

Equivalent mount kit of AP-MNT-C1 in 500 series

This thread has been viewed 22 times
  • 1.  Equivalent mount kit of AP-MNT-C1 in 500 series

    Posted May 18, 2021 05:01 AM
    Hello,

    We currently use AP 300 series along with AP-MNT-C1 mount kit which is rail mount kit. We are now looking for 500 series AP, can anyone confirm which will be the equivalent mount kit. I could see Type A,B and C are available in rail mount but which one will be equivalent or similar to AP-MNT-C1. thanks in advance

    ------------------------------
    Daniel Dsouza
    ------------------------------


  • 2.  RE: Equivalent mount kit of AP-MNT-C1 in 500 series

    Posted May 18, 2021 06:35 AM
    See this link: https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Default.aspx?EntryId=31544

    The Aruba AP-MNT-MP10 Indoor Access Point Mount Kits.pdf will tell you what you need to know for each mount type available from Aruba.

    ------------------------------
    Dustin Burns
    Senior Mobility and Access Engineer @WEI

    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
    If my post was useful accept solution and/or give kudos
    ------------------------------



  • 3.  RE: Equivalent mount kit of AP-MNT-C1 in 500 series

    Posted May 20, 2021 12:49 PM

    I mount hundreds of APs on grid ceilings at work, but I'm scared to run cable and do it at home. Punching a hole from the attic seems awful permanent. Drilling screws from the mounting bracket seems okay, once. What about when I upgrade the AP? The new bracket will likely leave holes where the screws were. What about when I sell the house? If I take the AP down there will now be a random hole.

    Any thoughts?


    kabosu coin

    ------------------------------
    Gladyce Rohan
    ------------------------------



  • 4.  RE: Equivalent mount kit of AP-MNT-C1 in 500 series

    Posted May 20, 2021 05:15 PM
    Plaster or spackle repair kit? :) Either way you need to make a hole for the cable no?

    ------------------------------
    Dustin Burns
    Senior Mobility and Access Engineer @WEI

    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
    If my post was useful accept solution and/or give kudos
    ------------------------------