Plaster or spackle repair kit? :) Either way you need to make a hole for the cable no?
------------------------------
Dustin Burns
Senior Mobility and Access Engineer @WEI
ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
If my post was useful accept solution and/or give kudos
------------------------------
Original Message:
Sent: May 20, 2021 05:34 AM
From: Gladyce Rohan
Subject: Equivalent mount kit of AP-MNT-C1 in 500 series
I mount hundreds of APs on grid ceilings at work, but I'm scared to run cable and do it at home. Punching a hole from the attic seems awful permanent. Drilling screws from the mounting bracket seems okay, once. What about when I upgrade the AP? The new bracket will likely leave holes where the screws were. What about when I sell the house? If I take the AP down there will now be a random hole.
Any thoughts?
------------------------------
Gladyce Rohan
Original Message:
Sent: May 18, 2021 05:00 AM
From: Daniel Dsouza
Subject: Equivalent mount kit of AP-MNT-C1 in 500 series
Hello,
We currently use AP 300 series along with AP-MNT-C1 mount kit which is rail mount kit. We are now looking for 500 series AP, can anyone confirm which will be the equivalent mount kit. I could see Type A,B and C are available in rail mount but which one will be equivalent or similar to AP-MNT-C1. thanks in advance
------------------------------
Daniel Dsouza
------------------------------