Hi.
You can do it from the controller and there is another procedure.
You must enable telnet access to the CAP in the controller configuration and put a password for telnet.
Access to the AP and execute:
Shift+Ctrl+Alt+K
bootenv -j -> this command is to see the variables
bootenv -s
bootenv -p os_partition=1
bootenv -p uap_controller_less=1
Then reload the ap.
------------------------------
Javier Palomo
------------------------------
Original Message:
Sent: Feb 24, 2021 03:18 AM
From: Vincent Hebert
Subject: AP-305 to IAP
Provided your controller(s) run AOS 8.6 or newer, you can convert CAPs to IAPs with the command "ap convert"
Procedure can be found in the AOS 8.6 user guide:
https://support.hpe.com/hpesc/public/docDisplay?docId=a00092459en_us
Page 597
------------------------------
Vincent Hebert
Original Message:
Sent: Feb 23, 2021 09:55 AM
From: Jason Taylor
Subject: AP-305 to IAP
Hello all,
I have read that campus AP's such as the 305 can be converted to Instant using some CLI commands, is this correct. I remember from years ago this was not possible.
------------------------------
Jason
------------------------------