Controllerless Networks

 View Only
last person joined: 2 days ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

VLAN Assignment for new Network

This thread has been viewed 32 times

  • 1.  VLAN Assignment for new Network

    Posted Dec 29, 2021 01:52 PM
    Hello All,

           We are using W-AP205's in our network. I want to add a new wireless network for users in which the IP range is defined in DHCP on our domain controller. I defined the VLAN ID on our L3 switch. In the Instant GUI, I chose "Network Assigned" for the Client IP Assignment. I have some questions about the "Client VLAN Assignment" setting though. I see Default, Static, and Dynamic as options. If I want the new wireless network to use the network defined in DHCP on our domain controller and recently added to our L3 switch, would I use "Static" as the option and choose the VLAN ID that I defined on the L3 switch? Please let me know at your convenience. 

    Thank you,
    Brian

    ------------------------------
    Brian Sawyer
    ------------------------------


  • 2.  RE: VLAN Assignment for new Network
    Best Answer

    MVP GURU
    Posted Dec 29, 2021 02:08 PM
    Yes use static, and make sure that VLAN is trunked to the AP. You can override the VLAN later if needed with RADIUS or by the role assignments.

    ------------------------------
    Dustin Burns
    Lead Mobility Engineer @WEI

    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
    If my post was useful accept solution and/or give kudos
    ------------------------------

    Original Message


  • 3.  RE: VLAN Assignment for new Network

    Posted Dec 29, 2021 03:20 PM
    thank you Dustin for clarifying that for me. Much appreciated!

    ------------------------------
    Brian Sawyer
    ------------------------------

    Original Message