Controllerless Networks

 View Only
last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

IAP Wired Port Profile

This thread has been viewed 28 times

  • 1.  IAP Wired Port Profile

    Posted Feb 04, 2021 07:12 AM
    Been a while since I have assigned a Port profile on an IAP that is part of a cluster. I thought you could edit an individual AP directly and assign a profile. Say I have a cluster of 3 AP's. I want to assign different profiles to port E1 differently on each AP. Is this possible? Seems Port Profiles can only be assigned at the Cluster level and all APs will have the same profiles on the ports. 

    Central 2.5.1 eludes that this is possible Configuring Ethernet Port Profiles on Instant APs - Section: Configuring Network Port Profile Assignment - Step 3. 

    Central 2.5.2 removed this verbiage. 

    Local IAP Config (No Central) - Not seeing a way to do it either.

    ------------------------------
    Philip Wightman, ACEX (AMFX) #69. Aruba Partner Ambassador
    ------------------------------


  • 2.  RE: IAP Wired Port Profile

    EMPLOYEE
    Posted Feb 11, 2021 04:56 PM
    the eth port profile are configured for the whole cluster

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------

    Original Message


  • 3.  RE: IAP Wired Port Profile

    Posted Feb 11, 2021 06:08 PM
    Thank you for the confirmation. I see a feature request in my future. 




    Original Message