DHCP.
Here's the log:
<<<<< Welcome to the Access Point >>>>>
Completed SW FIPS KAT test
Power supply mode is POE-AF:, USB Modem is not present.
[ 210.134766] tcrypt begin=e6576000 end=e657b000 scan pass
User: [ 211.200247] Starting Kernel HMAC SHA1 FIPS KAT ...
[ 211.255495] Completed Kernel HMAC SHA1 FIPS KAT
[ 213.202258] Starting Kernel HMAC SHA256 FIPS KAT ...
[ 213.259591] Completed Kernel HMAC SHA256 FIPS KAT
ble_ready NOT present @init ....
[ 215.202355] Starting Kernel HMAC SHA384 FIPS KAT ...
[ 215.259683] Completed Kernel HMAC SHA384 FIPS KAT
[ 217.218259] Starting Kernel HMAC SHA512 FIPS KAT ...
[ 217.275673] Completed Kernel HMAC SHA512 FIPS KAT
[ 235.941346] __ieee80211_smart_ant_init: devname = wifi0, interface_id = 0
[ 236.029454] VAP device aruba015 created osifp: (d7f7e940) os_if: (d6f28000)
[ 236.142869] __ieee80211_smart_ant_init: devname = wifi1, interface_id = 1
[ 236.233872] VAP device aruba115 created osifp: (d9deb760) os_if: (d7038000)
[ 236.554248] ieee80211_ioctl_dbgreq received fips event 2 dbaf19c0 length 16
Firmware AES-CCM Known Answer Test Passed
[ 237.697704] wlan_mlme_app_ie_delete: appie is NULL. Do nothing.
[ 238.837565] wlan_mlme_app_ie_delete: appie is NULL. Do nothing.
[ 242.205207] asap_user_update_stm_bridge_user : Stack IP is 0
[ 245.125187] enet0 bridging is enabled
[ 248.965463] bond0 acl set to 100 100 0
[ 249.011443] aquantia_config_aneg[844]: advertising=0x180092e8 aneg_highest_speed=5000 down_shift=1 5000=1 2500=1 1000=1 100=1
[ 249.147998] aquantia_config_aneg[852]: Setting same as current. Nothing to be done
[ 253.365987] __ieee80211_smart_ant_init: devname = wifi0, interface_id = 0
[ 253.455438] VAP device aruba000 created osifp: (d7f7a6c0) os_if: (d87d8000)
[ 253.591429] wmi_unified_set_psmode:set psmode=1
[ 253.645788] wmi_unified_set_psmode:set psmode=0
[ 253.700121] wmi_unified_set_psmode:set psmode=0
[ 253.764638] VAP device aruba001 created osifp: (d7f7c800) os_if: (d73b8000)
[ 255.067997] asap_user_update_stm_bridge_user : Stack IP is 0
[ 260.435721] asap_user_update_stm_bridge_user : Stack IP is 0
[ 261.316128] asap_user_update_stm_bridge_user : Stack IP is 0
[ 269.475251] asap_user_update_stm_bridge_user : Stack IP is 0
[ 270.048252] asap_user_update_stm_bridge_user : Stack IP is 0
[ 290.199941] asap_user_update_stm_bridge_user : Stack IP is 0
[ 290.581087] asap_user_update_stm_bridge_user : Stack IP is 0
[ 297.970072] asap_user_update_stm_bridge_user : Stack IP is 0
[ 299.354544] asap_user_update_stm_bridge_user : Stack IP is 0
[ 323.726134] asap_user_update_stm_bridge_user : Stack IP is 0
[ 329.610553] asap_user_update_stm_bridge_user : Stack IP is 0
[ 331.104679] asap_user_update_stm_bridge_user : Stack IP is 0
[ 332.039764] asap_user_update_stm_bridge_user : Stack IP is 0
[ 332.349077] asap_user_update_stm_bridge_user : Stack IP is 0
[ 332.715257] asap_user_update_stm_bridge_user : Stack IP is 0
[ 335.337345] asap_user_update_stm_bridge_user : Stack IP is 0
[ 336.990930] asap_user_update_stm_bridge_user : Stack IP is 0
[ 348.241560] asap_user_update_stm_bridge_user : Stack IP is 0
[ 348.766086] asap_user_update_stm_bridge_user : Stack IP is 0
[ 352.281008] asap_user_update_stm_bridge_user : Stack IP is 0
[ 354.996081] asap_user_update_stm_bridge_user : Stack IP is 0
[ 357.313558] asap_user_update_stm_bridge_user : Stack IP is 0
[ 359.051945] asap_user_update_stm_bridge_user : Stack IP is 0
[ 360.077823] asap_user_update_stm_bridge_user : Stack IP is 0
[ 360.656145] asap_user_update_stm_bridge_user : Stack IP is 0
[ 361.374623] asap_user_update_stm_bridge_user : Stack IP is 0
[ 361.531330] asap_user_update_stm_bridge_user : Stack IP is 0
[ 362.364778] asap_user_update_stm_bridge_user : Stack IP is 0
[ 363.869458] asap_user_update_stm_bridge_user : Stack IP is 0
[ 368.568276] asap_user_update_stm_bridge_user : Stack IP is 0
[ 368.683836] asap_user_update_stm_bridge_user : Stack IP is 0
[ 370.805992] asap_user_update_stm_bridge_user : Stack IP is 0
[ 372.804903] asap_user_update_stm_bridge_user : Stack IP is 0
[ 375.212667] asap_user_update_stm_bridge_user : Stack IP is 0
[ 376.079875] asap_user_update_stm_bridge_user : Stack IP is 0
[ 377.346634] asap_user_update_stm_bridge_user : Stack IP is 0
[ 379.106911] asap_user_update_stm_bridge_user : Stack IP is 0
[ 379.440918] asap_user_update_stm_bridge_user : Stack IP is 0
[ 394.386449] asap_user_update_stm_bridge_user : Stack IP is 0
[ 422.302825] asap_user_update_stm_bridge_user : Stack IP is 0
[ 559.538674] ethernet_device_event: dev eth1 others: 9
[ 559.618130] ethernet_device_event: dev eth1 is down
Sending SIGKILL to all processes.
[ 870.881995] UBIFS: un-mount UBI device 2, volume 0
[ 870.939346] UBIFS: background thread "ubifs_bgt2_0" stops
Unmounting UBIFS completed.
Please stand by while rebooting the system.
[ 873.090999] reboot: Restarting system
X4 SPI boot...
SF: Detected MX25L3205D with page size 64 kB, total 4 MB
SF: Detected MX25L3205D with page size 64 kB, total 4 MB
Loading second stage boot loader .................................................................................................
APBoot 1.5.4.9 (build 61851)
Built: 2017-10-11 at 14:36:15
CPU0: T1024E, Version: 1.0, (0x85480010)
Core: e5500, Version: 2.1, (0x80241021)
Single Source Clock Configuration
Clock Configuration:
CPU0:1200 MHz, CPU1:1200 MHz,
CCB:400 MHz,
DDR:800 MHz (1600 MT/s data rate) (Asynchronous), IFC:100 MHz
FMAN1: 600 MHz
QMAN: 400 MHz
L1: D-cache 32 KiB enabled
I-cache 32 KiB enabled
Reset Configuration Word (RCW):
00000000: 0810000c 00000000 00000000 00000000
00000010: 4c800003 80000012 5c027000 21000000
00000020: 00000000 00000000 00000000 00031000
00000030: 00000000 44260a08 00000000 00000006
Board: AP-33x
I2C: ready
SPI: ready
DRAM: 512 MB (DDR3, 32-bit, CL=11, ECC off)
Testing 0x00000000 - 0x1fffffff
POST1: memory passed
Flash: SF: Detected MX25L3205D with page size 64 kB, total 4 MB
L2: 256 kB enabled
Corenet Platform Cache: 256 kB enabled
Using SERDES1 Protocol: 153 (0x99)
NAND: 128 MiB
PCIe1: RC, link up, x1, speed 5 GT/s
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0046 00002 00 e0000004 00000000 00000000 00000000
PCIe2: disabled
PCIe3: RC, link up, x1, speed 2.5 GT/s
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0046 00002 00 e0000004 00000000 00000000 00000000
Power: 802.3af POE
Volume aos0 has been created
Volume aos1 has been created
Volume ubifs has been created
Net: SF: Detected MX25L3205D with page size 64 kB, total 4 MB
Fman1: Uploading microcode version 108.4.10
eth0, eth1
FIPS: passed
Hit <Enter> to stop autoboot: 0
Booting OS partition 1
Checking image @ 0x2000000
Copying image from 0x08000000
Image is signed; verifying checksum... passed
SHA2 Signature available
Signer Cert OK
Policy Cert OK
RSA signature verified using SHA2.
[ 0.000000]
[ 0.000000] Aruba Networks
[ 0.000000] ArubaOS Version 8.6.0.6-8.6.0.6 (build 77124 / label #77124)
[ 0.000000] Built by p4build@pr-hpn-build07 on 2020-09-15 at 16:26:34 UTC (gcc version 4.8.1)
[ 9.474424]
Starting Kernel SHA1 KAT ...
[ 9.521377] Completed Kernel SHA1 KAT
[ 9.568360] Starting Kernel HMAC-SHA1 KAT ...
[ 9.618501] Starting Kernel DES KAT ...[ 9.664399] Completed Kernel DES KAT
[ 9.708212] Starting Kernel AES KAT ...
[ 9.750965] Completed Kernel AES KAT
[ 9.750965]
[ 9.814547] Starting Kernel AESGCM KAT ...Thu Jan 1 00:00:00 PST 1970
[ 9.861456] Completed Kernel AESGCM KAT
[ 9.941927] Completed Kernel HMAC-SHA1 KAT
Populate AP type info
Domain Name: SetMeUp.arubanetworks.com
Current OEM Name : Aruba Networks
Disabling ipv6 for devices by default
AP-type has_ble_support: ONBOARD.
IPv6 capability is supported for devices
No panic info available
Writing /dev/ttyS01 into /tmp/ble_port
Enabling ble_daemon and ble_relay via nanny
x4: Start hotplug
Backup ENV.
[ 17.578580] isl28022 begin=e3485000 end=e3487000 scan pass
[ 18.818263] isl28022: Found MPC adapter at 0xffe118000
[ 18.893276] ipm begin=e3495000 end=e3497000 scan pass
Enter non-FIPS mode
Cfg len is 2741
factory default SSID detected...
factory_ssid_present 1
The AP is in factory default status
Mesh disabled
Ethernet port 1 mode: active-sta[ 21.569263] bonding begin=e34c6000 end=e34d9000 scan pass
ndby
[ 21.636466] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 21.727939] bonding: MII link monitoring set to 400 ms
[ 22.200012] aquantia_config_aneg[844]: advertising=0x1800f2e8 aneg_highest_speed=5000 down_shift=1 5000=1 2500=1 1000=1 100=1
[ 22.355311] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
[ 22.463096] cpu0/0: > WARNING (FM-Port) [CPU00, drivers/net/ethernet/freescale/fman/Peripherals/FM/Port/fm_port.c:3554 FM_PORT_Disable]:
[ 22.608954] cpu0/0: FM-0-port-10g-TX-0: BMI or QMI is Busy. Port forced down[ 22.693351] cpu0/0:
[ 22.731636] aquantia_config_aneg[844]: advertising=0x180092e8 aneg_highest_speed=5000 down_shift=1 5000=1 2500=1 1000=1 100=1
[ 22.868130] aquantia_config_aneg[852]: Setting same as current. Nothing to be done
[ 22.958925] bonding: bond0: making interface eth0 the new active one.
[ 23.036208] bonding: bond0: first active interface up!
[ 23.097707] bonding: bond0: enslaving eth0 as an active interface with an up link.
[ 23.188402] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
Info: use bonding and enslave eth1
[ 23.592495] bonding: bond0: link status definitely down for interface eth0, disabling it
[ 23.689492] bonding: bond0: now running without any active interface !
Starting watchdog process...
Aruba watchdog daemon started [1 thread(s)]
dual_uplink_default is 0
Loading configuration file of length 2741...
wifi uplink not present...
extended ssid config detected...
factory default SSID detected...
No valid ssid was found...
extended ssid activate due to no valid ssid ...
touching file /tmp/ip_mode_0
do ethtool autoneg on for eth0[ 24.313124] aquantia_config_aneg[844]: advertising=0x180092e8 aneg_highest_speed=5000 down_shift=1 5000=1 2500=1 1000=1 100=1
[ 24.477915] aquantia_config_aneg[852]: Setting same as current. Nothing to be done
eth1 admin down
init usb modem ...
[ 24.768491] crc_ccitt begin=e34e9000 end=e34ea000 scan pass
[ 24.881552] ppp_generic begin=e34fb000 end=e3501000 scan pass
[ 24.950374] PPP generic driver version 2.4.2
[ 25.081633] ppp_async begin=e350d000 end=e350f000 scan pass
[ 25.215379] usbserial begin=e3523000 end=e3528000 scan pass
[ 25.291269] usbcore: registered new interface driver usbserial
[ 25.366525] usbcore: registered new interface driver usbserial_generic
[ 25.446519] usbserial: USB Serial support registered for generic
[ 25.586077] cdrom begin=e353e000 end=e3545000 scan pass
[ 25.690136] sr_mod begin=e3553000 end=e3556000 scan pass
[ 25.815197] usb_storage begin=e3572000 end=e3577000 scan pass
[ 25.894121] usbcore: registered new interface driver usb-storage
No USB Plugged in
[ 46.127316] usbcore: deregistering interface driver usb-storage
[ 46.215276] cdrom: Uniform CD-ROM driver unloaded
[ 46.325927] usbserial: USB Serial deregistering driver generic
[ 46.404340] usbcore: deregistering interface driver usbserial_generic
[ 46.482126] usbcore: deregistering interface driver usbserial
Checking country code.
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
Ethernet uplink eth0 not active yet
skip backup uplink detect, as not dual uplink or no bonding
No uplink active. Becoming Mesh Point
Factory default ap without uplink, it will become a point.
[ 80.746685] bonding: bond0: enslaving eth1 as a backup interface with a down link.
[ 80.837728] bonding: bond0: link status definitely up for interface eth1, 1000 Mbps full duplex.
[ 80.942978] bonding: bond0: making interface eth1 the new active one.
[ 81.020185] bonding: bond0: first active interface up!
copying bootuplog ...
[ 81.136350] uol: module license 'Proprietary' taints kernel.
[ 81.204130] Disabling lock debugging due to kernel taint
[ 81.270718] uol begin=e35a0000 end=e35ae000 scan pass
[ 81.331268] UOL ctf init done
[ 81.366721] uol: dpaa.c:1581:check_gre_resource() Check GRE Resource
[ 81.443051] uol: dpaa.c:1605:check_gre_resource() Primary ethernet Rx default fqid is 0x104, name eth0
[ 81.554644] uol: dpaa.c:1612:check_gre_resource() Secondary ethernet Rx default fqid is 0x10c, name eth1
[ 81.668305] uol: dpaa.c:1641:check_gre_resource() Outbound BPID is 7, size is 9168, IPF BPID is 8, size is 4096
[ 81.789156] uol: dpaa.c:1642:check_gre_resource() def_fqid 0x53, err_fqid 0x52
[ 81.881882] FM_PCD_SetAdvancedOffloadSupport: revInfo=108, major=4, minor=10
[ 81.971730] uol: dpaa.c:1900:init_domain() Inbound Buffer Pool 32 size is 1792
[ 82.058245] uol: dpaa.c:1903:init_domain() Outbound Buffer Pool 7 size is 9168
[ 82.146278] uol: dpaa.c:3937:uol_dpaa_init_driver() Outbound OP hash result offset is 24
[ 82.243194] uol: dpaa.c:3943:uol_dpaa_init_driver() Outbound OP data_offset is 192
[ 82.333849] uol: dpaa.c:4007:uol_init_dpaa() Loading DPAA GRE driver, ret=0
[ 82.417215] init_uol_mod: offload cap: 0xc0, mesh mode point, strapless_enabled 0, uplink_vlan 0
[ 82.531320] drvlog_mod begin=e35bf000 end=e35c1000 scan pass
[ 82.776962] asap_mod begin=e3974000 end=e3aa7000 scan pass
[ 82.849456] AP xml model 92, num_radios 2 (jiffies 82849)
[ 82.914074] apType 92 hw_opmode 0
[ 82.953675] radio 0: band 1 ant 0 max_ssid 16
[ 83.005779] radio 1: band 0 ant 0 max_ssid 16
[ 83.057889] init_asap_mod: installation:0
[ 83.105843] election init: rand=1c HZ=1000
[ 83.154833] IAP client match init
[ 83.194722] ethernet_device_event: dev eth0 is up
[ 83.251014] ethernet_device_event: dev eth1 is up
[ 83.719068] anul begin=e4587000 end=e45bb000 scan pass
allow PAPI
set device anul0 mtu to 2000
notify asap_mod 3g no present...
apdot1x authentication is not enabled
skip dhcp when loop or wifi-uplink without eth detected !!!!!!!!!!!!!
waiting for default ip ready ...
[ 123.842486] netif_rx failed can't send wired port stats message to cli
[ 153.842483] netif_rx failed can't send wired port stats message to cli
[ 173.330453] Picked up default IP a9feb506, rand b506
[ 179.342449] Default IP is ready
Installing default ip.
Default IP comes up.
[ 180.344468] ip_time_handler: Got ip and packets on bond0 Started master election 1-0, rand 17
[ 190.296166] bonding: bond0: releasing active interface eth1
[ 190.365605] ethernet_device_event: dev eth1 others: 21
[ 190.427109] ethernet_device_event: dev eth1 others: 9
[ 190.507772] ethernet_device_event: dev eth1 is down
[ 190.566158] ethernet_device_event: dev eth1 others: 8
[ 190.632274] ethernet_device_event: dev eth1 others: 13
[ 190.795685] ethernet_device_event: dev eth1 is up
Compressing all files in the /etc/httpd directory...
Done.
Starting Webserver
bind: Transport endpoint is not connected
bind: Transport endpoint is not connected
bind: Transport endpoint is not connected
Put ntpdate to the nannylist.
[ 191.242527] adf begin=e5742000 end=e5745000 scan pass
[ 191.307098] asf begin=e5751000 end=e5753000 scan pass
[ 191.386854] ath_hal begin=e5819000 end=e586f000 scan pass
[ 191.452428] ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, 11D)
[ 191.544795] ath_rate_atheros begin=e58d6000 end=e58dd000 scan pass
[ 191.618855] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
[ 191.774226] ath_dfs begin=e58fd000 end=e5909000 scan pass
[ 191.838956] ath_dfs: Version 2.0.0
[ 191.838956] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
[ 191.988619] ath_spectral begin=e5921000 end=e5927000 scan pass
[ 192.076354] ath_dev begin=e5993000 end=e59d0000 scan pass
[ 192.141605] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
[ 192.357488] umac begin=e5d00000 end=e5ea7000 scan pass
[ 192.424156] ath_pci: (Atheros/multi-bss)
[ 192.472188] ath_pci 0000:01:00.0: BAR 0: assigned [mem 0xc00000000-0xc001fffff 64bit]
[ 192.566806] ath_pci 0000:01:00.0: ath DEBUG: sc=0xd9534de0
[ 198.339115] Startup Mode-0 set
[ 198.376163] htt_peer_map_timer_init Enter pdev d96f4000 hrtimer d96f6a20
[ 198.456428]
[ 198.456428] htt_alloc_peer_map_mem : Alloc Success : host q vaddr c7394280 paddr 7394280
[ 198.572096]
[ 198.572096] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
[ 198.675089] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from d8e40000
[ 198.770950]
[ 198.770950] SERIAL NUMBER: B3JN091JC951 : wifi0
[ 198.770950]
[ 198.860608] wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event
[ 199.014476] wmi_ready_event_rx: WMI UNIFIED READY event
[ 199.079165] target uses HTT version 2.2; host uses 2.2
[ 199.201560] aruba_mods_radio_attach: dev:<wifi0> ic:d9580580 osdev:d9534df0 phy:2
[ 199.291219] wifi0: Base BSSID f4:2e:7f:56:bd:d0, 16 available BSSID(s) processor ID: 0
[ 199.386077] eth0 address=f4:2e:7f:cd:6b:dc
[ 199.435058] br0 address=f4:2e:7f:cd:6b:dc
[ 199.482999] wifi0: AP type AP-335, radio 0, max_bssids 16
[ 199.547606] aruba_mods_radio_attach() INT setting antenna polarization to 1 radio 0
[ 199.640376] Resetting spectral chainmask to Rx chainmask
[ 199.908523] Disabling USB power
[ 199.973459] Resetting spectral chainmask to Rx chainmask
[ 200.037370] Init the PCAP for radio0 offload 1.
[ 200.093151] aruba_mods_radio_attach: radio: 0, init txq work cpu: core-0
[ 200.173737] ath_pci 0001:03:00.0: BAR 0: assigned [mem 0xc20000000-0xc201fffff 64bit]
[ 200.268836] ath_pci 0001:03:00.0: ath DEBUG: sc=0xd897cde0
[ 206.043496] Startup Mode-0 set
[ 206.080552] htt_peer_map_timer_init Enter pdev d84dc000 hrtimer d84dea20
[ 206.160827]
[ 206.160827] htt_alloc_peer_map_mem : Alloc Success : host q vaddr d89b5320 paddr 189b5320
[ 206.277590]
[ 206.277590] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
[ 206.380588] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from d8020000
[ 206.476382]
[ 206.476382] SERIAL NUMBER: EDIN091J2EF0 : wifi1
[ 206.476382]
[ 206.566009] wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event
[ 206.721257] wmi_ready_event_rx: WMI UNIFIED READY event
[ 206.785958] target uses HTT version 2.2; host uses 2.2
[ 206.858810] aruba_mods_radio_attach: dev:<wifi1> ic:d8a00580 osdev:d897cdf0 phy:2
[ 206.948478] wifi1: Base BSSID f4:2e:7f:56:bd:c0, 16 available BSSID(s) processor ID: 0
[ 207.043289] eth0 address=f4:2e:7f:cd:6b:dc
[ 207.092299] br0 address=f4:2e:7f:cd:6b:dc
[ 207.140233] wifi1: AP type AP-335, radio 1, max_bssids 16
[ 207.204902] aruba_mods_radio_attach() INT setting antenna polarization to 0 radio 1
[ 207.297641] Resetting spectral chainmask to Rx chainmask
[ 207.403931] Resetting spectral chainmask to Rx chainmask
[ 207.467828] Init the PCAP for radio1 offload 1.
[ 207.523584] aruba_mods_radio_attach: radio: 1, init txq work cpu: core-1
[ 207.625143] smart_antenna begin=e64ff000 end=e6505000 scan pass
[ 207.696069] __sa_init_module
[ 207.752754] ath_pktlog begin=e650b000 end=e650f000 scan pass
[ 207.820606] pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
[ 207.907109] pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
[ 208.085829] usbserial begin=e6523000 end=e6528000 scan pass
[ 208.155663] usbcore: registered new interface driver usbserial
[ 208.229020] usbcore: registered new interface driver usbserial_generic
[ 208.352207] usbserial: USB Serial support registered for generic
[ 208.428837] cp210x begin=e6539000 end=e653b000 scan pass
[ 208.501198] usbcore: registered new interface driver cp210x
[ 208.571592] usbserial: USB Serial support registered for cp210x
[ 208.695740] usbnet begin=e654f000 end=e6554000 scan pass
[ 208.768703] cdc_eem begin=e655f000 end=e6560000 scan pass
[ 208.846315] usbcore: registered new interface driver cdc_eem
AP rebooted Tue Sep 15 16:37:26 UTC 2020; mesh link BAD. rebooting mesh point by sapd
shutting down watchdog process (nanny will restart it)...
------------------------------
Debbie Floyd
------------------------------
Original Message:
Sent: Jan 14, 2021 05:58 PM
From: Joan Tomasso
Subject: IAP 335 Boot Loop
Hi, the network you have them plugged into, does it give dhcp or are you assigning the ip addresses via the boot up sequence?
thanks
jo
------------------------------
Joan Tomasso
Original Message:
Sent: Jan 13, 2021 06:39 PM
From: Debbie Floyd
Subject: IAP 335 Boot Loop
Hi There, I have 5 brand new IAP 335s that I am having issues with. Given that the same scenario is occurring with all 5 of them, I am going to assume that I m doing something wrong.
I have taken them out of the box and plugged them into my PoE switch ( I am doing this one at a time). They power up and go through the boot cycle, however they never get tot he point of cycling green/amber. They just continuously flash green. There are no other APs on this network and I have let each one sit for hours (and even overnight) before removing it and trying a different one. All 5 of them are doing the same thing. I have connected via console, but i do not see anything in there that is jumping out at me, albeit I don't quite know what I'm looking for.
Any help for this newbie is greatly appreciated!
------------------------------
Debbie Floyd
------------------------------