Hi,
I'm using one IAP305 and one IAP205 in a cluster at home and they both run 6.5.4.18_77207.
Strangely enough, the 300 series are not supported by 6.5.4.18, but the update was done through the automatic firmware upgrade in the web interface of the IAP's.
When I tried to check for an automatic upgrade to the 6.5.4.19_79367 firmware, I got an "image_check_required class not found" message when I clicked the "Check for New Version" button this morning.
Looking on the asp site, neither the 6.5.4.19, nor the 6.5.4.18 are listed as supporting the AP-300 series, although I know the 6.5.4.18 does. I'm not going to try to run the newer firmware on the 305 as I will be swapping out the 205 out for something more resent soon.
Hope this helps,
Steven
------------------------------
Steven Demets
------------------------------
Original Message:
Sent: Mar 05, 2021 09:22 AM
From: mohammad shamseddine
Subject: IAP 305 and 205 in the same cluster
Hello Team,
I have aruba instant virtual controller network consisting of 205 and 305 instant aps in the same cluster, and i want to perform firmware upgrade for them, appreciate if someone can help with this and inform me about the appropriate firmware version i should use and if it is possible that the 205 run on a specific firmware and the 305 run on different firmware in the same cluster, or they both should run the same firmware
Appreciate your help
thanks
------------------------------
mohammad shamseddine
------------------------------