Controllerless Networks

 View Only
last person joined: 2 days ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Issue with 8.7.1.3?

This thread has been viewed 52 times

  • 1.  Issue with 8.7.1.3?

    Posted Jun 10, 2021 10:11 AM
    Just upgraded IAP-305s, -315s, -365s and -577/575s to 8.7.1.3. Shortly after the upgrade, all the IAPs began sending thousands of alert messages to AirWave, all containing this sort of message:

    meshd[6290]: meshd_anulmesh_link_table_check: LINE 2 no
    peer MAC
     meshd[6290]: meshd_anulmesh_link_table_check: LINE 1
    link mode<Bridge> is not WIFI

     meshd[6290]: meshd_anulmesh_link_table_check: open
    anulmesh link table succeed

    In two clusters containing a total of 88 IAPs, AirWave very quickly received over 16,000 of these messages. Any idea what would cause this? We upgraded to 8.7.1.3 from 8.6.0.6


    ------------------------------
    Jon Koelker
    ------------------------------


  • 2.  RE: Issue with 8.7.1.3?

    EMPLOYEE
    Posted Jun 16, 2021 08:08 PM
    these are debug info that are sent through syslog. you can ignore them or filter it out.

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------

    Original Message


  • 3.  RE: Issue with 8.7.1.3?

    Posted Jul 12, 2021 02:05 PM
    Nope, these are emergency-level messages.
    Original Message


  • 4.  RE: Issue with 8.7.1.3?

    Posted Sep 13, 2021 09:52 AM
    We have 505H using firmware Version 8.8.0.0 and Version 8.7.1.4

    The same happens... every 10 seconds each AP throws 5 messages:

    AP:W-NCB-R429-AP-1 <169.254.35.91 20:4C:03:D6:AD:97> meshd[7901]: meshd_anulmesh_link_table_check: open anulmesh link table succeed
    AP:XX-YY-ZZ-AP-1 <169.254.35.91 20:4C:03:D6:AD:97> meshd[7901]: meshd_anulmesh_link_table_check: LINE 1: < 0: 20:4c:03:d6:ad:97 20:4c:03:d6:ad:97 Bridge Internal br0 1376844729 0 >
    AP:XX-YY-ZZ-AP-1 <169.254.35.91 20:4C:03:D6:AD:97> meshd[7901]: meshd_anulmesh_link_table_check: LINE 2 no peer MAC
    AP:XX-YY-ZZ-AP-1 <169.254.35.91 20:4C:03:D6:AD:97> meshd[7901]: meshd_anulmesh_link_table_check: LINE 1 link mode<Bridge> is not WIFI
    AP:XX-YY-ZZ-AP-1 <169.254.35.91 20:4C:03:D6:AD:97> meshd[7901]: meshd_anulmesh_link_table_check: LINE 2: < >

    It can not be filtered by the syslog-level commands...
    We have tried with several combinations but no success...

    This is one test... but messages still appear.

    Syslog Level :warn
    Logging Level
    -------------
    Facility Level
    -------- -----
    ap-debug emergency
    network emergency
    security emergency
    system emergency
    user emergency
    user-debug emergency
    wireless emergency


    ------------------------------
    Fernando Iñiguez
    ------------------------------

    Original Message