Controllerless Networks

 View Only
last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Access point work as bridge after controller down

This thread has been viewed 3 times

  • 1.  Access point work as bridge after controller down

    Posted Nov 30, 2021 08:23 AM

    dears,

    Let me clarifity

     

    We have MM-MC setup

    MM into HQ

    MC on the Branch

    APs connect to Branch Controller Tunnel mode /CAP

    The request is

    When the branch went down Branch AP will work as bridge mode ,

     

    So the question is :-

    • How to achieve this by configuration
    • If MC became UP ,Is AP terminated again onto it automatically or need any action manually ?


    ------------------------------
    mohamed gamal
    ------------------------------


  • 2.  RE: Access point work as bridge after controller down

    EMPLOYEE
    Posted Nov 30, 2021 11:26 AM
    this will only work
    (1) If the AP is a remote AP and
    (2) The remote AP setting for the Virtual AP is "always"

    It is preferred to deploy an instant AP to those locations.

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------

    Original Message