Wired Intelligent Edge

 View Only
last person joined: 2 days ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

How to rout between vlans in Aruba 2530-48G by web interface ?

This thread has been viewed 21 times

  • 1.  How to rout between vlans in Aruba 2530-48G by web interface ?

    Posted Sep 18, 2018 06:09 AM

    Hi all,

    I have 3 switchs Aruba 2530-48G and one router Dektec300B. I already tested creating some vlans and it is done. Now i want a vlan (belong to  a vlan)  to be able to access to another. How can i do that in webinterface (i am newbie so cannot use cli)?

    Thanks alot.



  • 2.  RE: How to rout between vlans in Aruba 2530-48G by web interface ?

    EMPLOYEE
    Posted Sep 18, 2018 06:38 PM

    Greetings!

     

    The 2530 is a Layer 2-only switch, and as such does not support inter-VLAN routing. You would need to tag the VLANs across the uplink to the router and configure it to perform any desired routing there.



  • 3.  RE: How to rout between vlans in Aruba 2530-48G by web interface ?

    Posted Jan 03, 2022 10:59 AM
    hello,

    I know this post was a few years ago, but since i don't know the hpe-2530 very well...I just posted a question at:  

    https://community.arubanetworks.com/community-home/digestviewer/viewthread?GroupId=61&MessageKey=8902f06f-8c01-4da4-93b4-66c6255051a3&CommunityKey=0e07426b-9490-40f0-bb66-f95a4b8a674f&tab=digestviewer&ReturnUrl=%2fcommunity-home%2fdigestviewer%3fcommunitykey%3d0e07426b-9490-40f0-bb66-f95a4b8a674f%26tab%3ddigestviewer


    Not sure if what you are saying here is what I have configured?  If so, I still can't get the inter vlan routing working?

    ------------------------------
    Ernest Grogg
    ------------------------------

    Original Message


  • 4.  RE: How to rout between vlans in Aruba 2530-48G by web interface ?

    MVP GURU
    Posted Jan 03, 2022 01:52 PM
    Hi Ernest, I tried to formulate an answer by replying on the linked thread. Just a note: the legacy HP ProCurve 2530 Switch series (or the current rebranded Aruba 2530 Switch series) doesn't support Layer 3 features...no IP routing. You can create VLAN (Layer 2) but the routing between them should be performed by an external/additional Layer 3 capable device (Switch/Firewall/Router/etc.).

    ------------------------------
    Davide Poletto
    ------------------------------

    Original Message


  • 5.  RE: How to rout between vlans in Aruba 2530-48G by web interface ?

    Posted Jan 03, 2022 02:27 PM
    Hello Sir,

    Our L3 device is the 7100 which is performing all the required IP functions.  Each Vlan is getting an IP except vLan 1 which was also set to DHCP.  I put all the info in the other post above.

    thanks for the thoughtful reply!  I truly appreciate it.

    ------------------------------
    Ernest Grogg
    ------------------------------

    Original Message