Wired Intelligent Edge

 View Only
last person joined: 18 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Add switch OS-CX (6000 series) to Airwave with AMON or SNMPv3

This thread has been viewed 48 times

  • 1.  Add switch OS-CX (6000 series) to Airwave with AMON or SNMPv3

    Posted Oct 06, 2020 07:05 PM

    Hi,

     

    Please help to add to this Airwave (config "comunication section" i guest) and in the CLI/GUI of Switches.

     

    Mean while In the swtich i did this:

    snmpv3 user SNMP-AirWave-User auth sha auth-pass plaintext MyAuthPa$$w()rd priv aes priv-pass plaintext MyPrivPa$$w()rd

     

    What next? 

    Best regards.



  • 2.  RE: Add switch OS-CX (6000 series) to Airwave with AMON or SNMPv3

    MVP GURU
    Posted Oct 09, 2020 04:18 AM

    You need now to configure AirWave and add device with SNMP info



  • 3.  RE: Add switch OS-CX (6000 series) to Airwave with AMON or SNMPv3

    Posted Jan 04, 2021 11:44 AM
    Can 6300M ​​switches be monitored on NetEdit and Airwave at the same time?
    In my 6300M ​​switches we have version FL.10.06.0001


    Regards.

    ------------------------------
    Edgar Moreno
    ------------------------------

    Original Message


  • 4.  RE: Add switch OS-CX (6000 series) to Airwave with AMON or SNMPv3

    EMPLOYEE
    Posted Jan 05, 2021 01:17 AM
    Hi,

    from my point of view, this should be possible. AirWave can only monitor CX switches. NetEdit will monitor CX switches and you will be able to do all the configuration stuff as well. Normally, it is not needed to have CX switches in two Management Tools and I would recommend only use NetEdit. But if you have all the rest of your network managed by AirWave it makes sense to have the CX switches there as well. This will give you a complete picture of your network from one management tool. 

    BR
    Florian

    ------------------------------
    Florian Baaske
    ------------------------------

    Original Message