is there an equivalent command to the Switch ip authorized-managers to secure the mgmt interface on the OS-CX,
We are using the Loopback for mgmt as well and routing, so would need IP connectivity, but not SSH, HTTPS etc etc.
Yes, this is ACL applied to the control-plane:
Create your ACL using permit/deny (be specific so you can have a permit any any any at the end) and apply the ACL to the control-plane in the proper VRF.
apply access-list ip ACL-name control-plane vrf mgmt
I have the same problem
I want to allow specific addresses to access SNMP (ro+rw) & SSH
like the commands in aruba-os - 2930f for example:
ip authorized-managers 192.168.1.10 access-method ssh
ip authorized-managers 192.168.2.10 access-method access operator
ip authorized-managers 192.168.2.11 access-method access manager
I use only one VRF (the default)
How can i do it?
Control plane acl may be used in default vrf, this link will help you
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.