Wired Intelligent Edge

last person joined: 16 hours ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.

AOS-CX ACL commands (COUNT/LOG) ???

This thread has been viewed 3 times
  • 1.  AOS-CX ACL commands (COUNT/LOG) ???

    Posted Jun 09, 2020 05:44 AM

    Re: AOS-CX ACL commands (COUNT/LOG)

     

    I have not found a global method to add/remove COUNT to every ACE in mass.

     

    A method to automatically add/remove a "LOG COUNT" parameter to each ACE by using an ACL global COMMAND.

     

    If there is not a method, there should be.

     

    Something like (similar to the resequencing command paramter):

     

    access-list ip FILTER_TO_HOST_B COUNT deny

    and

    access-list ip FILTER_TO_HOST_B LOG COUNT deny

    and

    access-list ip FILTER_TO_HOST_B LOG COUNT any

     

    Yes, I understand you can presently only LOG DENY ACE's but the OS could be smart enough to add Logs/Counts to any ACE that is supported when the ACL COUNT/LOG command is applied.


    #8320