you are right it is not mentioned in the datasheet, we should get it corrected.
but its supported for sure, refer to AOS-S and AOS-CX Transceiver Guide Edition: 11
https://support.hpe.com/hpesc/public/docDisplay?docId=a00028947en_us------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
------------------------------
Original Message:
Sent: Jan 17, 2022 02:18 AM
From: Andriy -
Subject: connect JL663A (Aruba 6300M 24SFP+ 4SFP56 Swch) with JL075 (Aruba 3810M-16SFP+)
there are no J9150D in this list from data sheet
Original Message:
Sent: Jan 17, 2022 01:45 AM
From: Ariya Parsamanesh
Subject: connect JL663A (Aruba 6300M 24SFP+ 4SFP56 Swch) with JL075 (Aruba 3810M-16SFP+)
Aruba 6300 CX switches support the following 10GE transceivers as mentioned in the datasheet
JL563A | Aruba 10GBASE-T SFP+ RJ45 30m Cat6A Transceiver |
J9150D | Aruba 10G SFP+ LC SR 300m MMF Transceiver |
J9151E | Aruba 10G SFP+ LC LR 10km SMF Transceiver |
J9153D | Aruba 10G SFP+ LC ER 40km SMF Transceiver |
------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
Original Message:
Sent: Jan 17, 2022 01:04 AM
From: Andriy -
Subject: connect JL663A (Aruba 6300M 24SFP+ 4SFP56 Swch) with JL075 (Aruba 3810M-16SFP+)
New access switches JL663A (Aruba 6300M 24SFP), as I see will required "Aruba 10G SFP+ LC SR 300m OM3 MMF Transceiver for
HPE (R9F82A)" and probably will not support "J9150D Aruba 10G SFP+ LC SR 300m MMF XCVR" https://www.arubanetworks.com/assets/ds/DS_6300Series.pdfArubanetworks | remove preview |
|
can you confirm pls that such GBIC " Aruba 10G SFP+ LC SR 300m OM3 MMF Transceiver for
HPE (R9F82A) " from access switch side can be connected with GBIC "J9150D" on Aruba JL075 3810M-16SFP+ , which is distribution level switch.
Is the same applicable to another access switch "JL665A, Aruba 6300F 48G CL4 PoE 4SFP56 Switch" ?!