Wired Intelligent Edge

 View Only
last person joined: 18 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

2930F - SNMPV3 passwords for user aren't being shown in the config or saving.

This thread has been viewed 4 times

  • 1.  2930F - SNMPV3 passwords for user aren't being shown in the config or saving.

    Posted May 10, 2021 10:37 AM
    I am having trouble with one of my Aruba 2930F's when setting up SNMPV3. I can set up a user with auth/priv MD5/SHA, but after I enter it, nothing comes up in the running config. This is the only switch that is doing it and it's on the latest firmware.

    For some reason, it is not accepting the credentials, which is forcing me to not be able to join it to my NMS,

    When creating a user for SNMPV3 this is how it comes out:
    snmpv3 user "test" 
    snmpv3 enable 

    For my other switches it actually says:

    snmpv3 user "test" "auth sha "243523452" priv aes "23423423423"

    Anyone have any ideas? Thanks.

    ------------------------------
    Randy Havens
    ------------------------------