Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Expand all | Collapse all

Switch port become disable due to port security

This thread has been viewed 22 times
  • 1.  Switch port become disable due to port security

    Posted Dec 01, 2020 06:53 AM
    Hi,

    Setup: We have Aruba access points connected to Aruba switches with port security enable.

    Issue: access point getting down because switch sending disable action to switch ports that connected with access points randomly

    port-security learn-mode limited-continuous address-limit 5 action send-disable
    spanning-tree admin-edge-port
    spanning-tree bpdu-protection

    Firmware : WC.16.08.0001

    SSID forwarding mode is tunnel

    ------------------------------
    harendra nishshanka
    ------------------------------


  • 2.  RE: Switch port become disable due to port security

    MVP GURU
    Posted Dec 01, 2020 03:57 PM
    Hi,

    What do you have on the switch log ?

    ------------------------------
    PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...

    PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)

    PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..

    ACEP / ACMX #107 / ACDX #1281
    ------------------------------



  • 3.  RE: Switch port become disable due to port security

    Posted Dec 01, 2020 04:48 PM
    Below is the log for one switch port. this mac address is aruba

    W 11/29/20 15:10:42 00334 FFI: ST4-CMDR: Port 1/37 - Security violation caused
    by MAC address 7c573c-9540c6.

    ------------------------------
    harendra nishshanka
    ------------------------------



  • 4.  RE: Switch port become disable due to port security

    MVP GURU
    Posted Dec 04, 2020 03:03 PM
    What this MAC Address ?

    there is no Bridge SSID ?

    ------------------------------
    PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...

    PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)

    PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..

    ACEP / ACMX #107 / ACDX #1281
    ------------------------------